Member's display HEBEILEADING Hebei Leading Metals & Piping Industries Co., Ltd.

Thursday, June 13, 2024

Quantity : 1000000 pc - Price : USD0.5-USD3000.0

The Center point of the circle at both ends of the tube are on the same straight line are called concentric reducer. The Concentric reducer (reducing pipe) is a pipe fitting used for the diameter of the pipe. The commonly used forming process is reducing diameter pressing, expanding...

Thursday, June 13, 2024

Quantity : 1000000 pc - Price : USD0.5-USD3000.0

A ductile iron foot valve is a kind of energy-saving valve. It is generally installed at the bottom end of the underwater suction pipe of the water pump to restrict the liquid in the water pump pipe from returning to the water source. It is not easy to be blocked and is mainly used...

Thursday, June 13, 2024

Quantity : 1000000 pc - Price : USD0.5-USD3000.0

The pipe dismantling joint are double flanged fittings that accommodate up to longitudinal adjustment and can be locked at the required length with the tie bars supplied. It is a new product that is connected to the pipe, valves, and other equipment and pipelines. It connects them...

Thursday, June 13, 2024

Quantity : 1000000 pc - Price : USD0.5-USD3000.0

DIN FLANGENormally, in industrial applications, flanges are in various shapes and sizes and can be made of a variety of materials. However, the type of material used in the flange has nothing to do with the flange type or size. The flanges produced under the standard requirements...

Thursday, June 13, 2024

Quantity : 1000000 pc - Price : USD0.5-USD3000.0

The Center of a reducer circle ends which in a straight line is named as Concentric reducer. Usually reduced diameter forming process is pressed, compressed, or constricted diameter expanding compressed and reduced diameter together. Certain specifications reducers press molding may be employed...

Thursday, June 13, 2024

Quantity : 1000000 pc - Price : USD0.5-USD3000.0

The single-disc check valve is also called a single plate check valve, a wafer check valve: it is a valve that can automatically prevent fluid from flowing back. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side...

Thursday, June 13, 2024

Quantity : 1000000 pc - Price : USD0.5-USD3000.0

Check Valves Flanged End Check Valves Flanged End are used mostly to prevent the medium from flowing back in the piping system. Check valve flange type only allow the medium to flow in one direction, and when the medium flows in, the disc of check valves swings off the seat to allow...

Tuesday, April 09, 2024

Flanges Industrial ansi flanges for sale are a part used for connections between the ends of tubes or used at the entrance and exit of equipment for connections between two devices. A flange connection is a detachable connection connected by a combination of flanges, gaskets, and...

Tuesday, April 09, 2024

ERW Carbon Steel Pipe (electric resistance welding) is produced by welding strip of flat sheet metals. That are formed, bent and prepared for welding. After that, making galvanization treatment to help prevent corrosion, rust, thereby extending the pipe life. Welded Steel Pipe is...

Tuesday, April 09, 2024

Carbon steel pipes include seamless and welded constructure. Seamless steel pipes are mainly used for liquid transport, and are applicable to transport liquid, gas, oil, and mechanical propose. Welded pipes are lower production cost and raw materials availability. The common carbon...

Tuesday, April 09, 2024

DIN FLANGENormally, in industrial applications, flanges are in various shapes and sizes and can be made of a variety of materials. However, the type of material used in the flange has nothing to do with the flange type or size. The flanges produced under the standard requirements...

Tuesday, April 09, 2024

LSAW Pipe (Longitudinal Submerged Arc-Welding Pipe), DSAW pipe (Double Submerged Arc Welded Steel Pipe), Both of them are made of Steel raw materials by Arc Welding way which take the steel plate as raw material, mold it by the molding machine, then do double-sided submerged arc welding...

Tuesday, April 09, 2024

JIS flanges are flanges with Dimensions as per JIS Flange Standard, "JIS" Stands for Japanese Industrial Standard This kind of flange include lots of specification, like SOP, SPH, Blind flange, plate flange, welded neck flange, etc. Pressure grade from 5K 10K 16K 20K 30K, size range: 10A-1500A...

Monday, February 19, 2024

Alloy steel flanges are also a type of flange material. Mainly used for special features of piping and pipelines, mostly used for high temperature and high-pressure positions. Its common materials including12Cr1MoV, 15CrMo, P91, P22,10CrMo910 and so on. Application areas: ship application...

Monday, February 19, 2024

The extension line of the two nozzles of the 90° Elbow is vertical, and the two sides formed a right angle after taking over, which is the most commonly used type of all elbows 90° Elbow Vanish Paint Seamless/Welded VS 180° Elbow 1. Standard (Similarity): Both 90 ° elbow vanish paint...

Monday, February 19, 2024

Stainless steel elbow is mainly distinguished on different materials from the carbon steel elbow, and the chemical composition contained in the elbow is not rust for a long time, and it will not be corroded. 45° Elbow Pickled Seamless/Welded VS 90° 1. Standard (Similarity): Both...

Monday, February 19, 2024

45° seamless elbow are pipe fittings and pipeline connections. Used in main trunk line and the branch pipe. For changing the direction of the pipe. The ways to connect with the pipe are direct welding (the most common way) flange connection, hot melt connection, electrofusion connection...

Monday, February 19, 2024

The three-way ball valve has T-type and L-type. The T-type can make three orthogonal pipelines interconnected and cut off the third channel, from diversion, and flow. L Three-way ball valve type can only connect two pipelines orthogonal, and cannot maintain the mutual communication...

Monday, February 19, 2024

The three-piece ball valve consists of three parts, the valve cover and the intermediate valve body, the three-piece ball valve is different from the two-piece ball valve and a piece of ball valves lies in the disassembly maintenance. The three-piece ball valve is mostly fixed by...

Monday, February 19, 2024

Three male female ball valve belonging to three-valve ball series, mainly by the living body and the intermediate body around the web, and then connected by four bolts, connecting both ends of the external thread, the thread NPT and BSPT type comprising the like. 3PC Ball Valve with...

Monday, February 19, 2024

The high-mounting pad three-piece internal threaded ball valve is composed of a three-part structure, which is mainly composed of the middle valve body and the left and right valve bodies, which are connected by four bolts. It is convenient to install and disassemble on the right...

Wednesday, December 06, 2023

The cast steel gate valve wcb body is made of metal steel material. The opening and closing member of the cast steel gate is the gate, the direction of motion of the shutter is perpendicular to the fluid direction, and the gate valve can only be fully open and complete, and cannot...

Wednesday, December 06, 2023

Din 3352 f4 gate valve is the production standard of the German-labeled valve, which includes metal sealing valves and soft sealing valves. F4 is the structural length of the German-labeled valve, which is included in the DIN3202 standard, and the corresponding is F5. In contrast...

Wednesday, December 06, 2023

The rising gate valve is also referred to as a lifting stem gate valve, which is up and down together during the opening and closing process. The handwheel drives the valve stem nut to rotate, and the nut is rotated to drive the valve rod up and down. The valve stem is not turned...

Wednesday, December 06, 2023

DIN3352 is the production standard of the German standard valve, which includes metal sealing valves and soft sealing valves. F5 is the face-to-face length of the German standard valve, which is included in the DIN3202 standard, and the corresponding is F4. In contrast, the F5 structure...

Wednesday, December 06, 2023

The flange gate valve is a gate value of the flange, which is most common. The flange gate valve is stable and reliable during the pipeline, so the flange gate valve is often used on the high pressure line. The metal sealing flange is a gate valve that refers to a gate valve of...

Wednesday, December 06, 2023

Cast Steel Swing wcb check valve bonnet bolts, univalve swing, is the international swing check valve structure. Steel flanged check valves function of the control valve is a unidirectional flow of the medium in the pipeline, to prevent the line of medium back. ZHMWS-A1 WCB Body...

Thursday, October 12, 2023

Valves are pipeline attachments that open and close pipelines, control flow direction, adjust and control the parameters (temperature, pressure, and flow speed) of the medium it conveyed. Valves can be driven by a variety of transmission modes, Such as handle, gearbox, electric actuator...

Thursday, October 12, 2023

Female thread check valve refers to the valve that automatically opens and closes the valve flap depending on the flow of the medium itself, and is used to prevent the medium from flowing back. It is also called a check valve, one-way valve, reverse flow valve, and back pressure valve...

Thursday, October 12, 2023

Stainless steel stub end is a punching method for turning over the outer edge of the rough forgings or semi-finished product. the edge is turned into a vertical edge along a certain curve. When the edge of the stub end is a straight line, the converted deformation is converted into a curved...