EP/CC/NN Conveyor belt

Common polyester conveyor belt is also named as EP conveyor belt, and has the features of warp low elongation and excellent weft trough formation property as its tensile body is canvas interwoven by warp terylene and weft polyamide, good water resistance, unchanged wet strength, no mildew, and lower safety factor as the initial modulus of polyester is high, and is suitable for conveying materials in medium and long distance and high transmission capacity at a high speed.

It is suitable for conveying under normal room temperature and can be used on various non-corrosive pointless lumps, granular or powders such as coal, coke, sand and cement in either bulk or packaged products.

The edges of the belt are custom made and depending on the required use, can either be cut-edged or
mould-edged.

All the belts we provide meet cover grades and are in accordance with International standards (e.g. DIN 22102, RMA, AS 1332, SABS 1173/2000,IS 1891, BS 490, JIS K 6322 etc)

Belts are available in any width up to 100inch, depending on the requirement.

Covers are manufactured for any required thickness. The selection of top and bottom cover thickness would depend on the loading cycle, material and need for balanced constructions.