Construction goods

Engineering machinery use fuel oil purifier

Main Functions: Specifications

1. Filtering more than 90% harmful impurities in diesel fuel
2. Drawing off more than 95% water in diesel fuel
3. Reducing vehicle emissions up to 20% to 60%
4. Diesel fuel consumption reduced by 5% to 10%



Size: 580*480*595mm
Interface of inlet&outlet pipe: flange Dn50
Flow: 0-240L/min
Max working pressure: 500Kpa
Net weight: 78kg
Type and quantity of filter core: C1040A*7

Main Advantages: Main Effects:

1. Integrated multi-level filter technology
2. High filter fineness and working efficiency
3. Long replacement cycle for filter core
4. Low original resistance


1. Decreasing fuel consumption
2. Reducing engine failure and strengthening dynamic accordingly
3. Prolonging engine service life
4. Reducing maintenance cost for diesel engine and its diesel filter

Ⅰ.Product Description:  

THY-400Q diesel oil purifier is the special equipment for diesel cleaning. It was ceveloped by Xi'an Tianhou Filter Technology Co.,Ltd. Its special filter technology of multistage as one could filter more than 90% detrimental impurities and has strong function of oil water separation. Top purification cavity design prevent contaminated oil into purification cavity when changing filter element.

Structural feature:

Structual features: stainless steel design, single-bucket struction, DN50 flange connection for inlet&outlet, on-top Purification cavity design to prevent contaminated oil into Purification cavity while changing filter core, easy installation,.

Ⅱ.Product function and installation:  

While using, it should series connect the reserved oil inlet(outlet) port of the product with the fueling pipelines between the engine and oil box(or storage tank). It should pay attention to the direction of oil inlet(outlet). When using and changing the filter element at the first time, it should note that draining away the air in the tank completely. Installation height of oil box(or storage tank) should be higher than height of 400Q.

Water draining and change filter element

The diesel purifier has strong function of oil water separation, when being use continually, it should have water draining and contamination draining in every 7 days; open blowdown valve until water and contaminated oil out of unit, then close blowndown valve

Ⅲ. Method of changing filter element  

Under normal using, if pressure gage give out warning or oil have been used over 3000 hours, it should change filter element.
1) close inlet valve and loose fitting nut on the top cover to open top cover.
2) Open blowdown valve until contaminated oil out of unit and remove filter element gently in the vertical position.
3) Put new filter element into unit.
4) Close drain valve and upper end cover(attention to put on sealing ring) to fit the fastening bolt.
5) When using work mode of oil pumping , you should fill vat with oil and drain away air completely, open inlet and outlet valve and then boot; when using work mode of oiling, open inlet valve and meantime open venting screw, fit venting screw when oil out of hole of venting screw., it is ok to use after opening outlet valve.


Application: THY-400Q diesel oil purifiers can be mainly applied to various oil storage facilities.

Location : , 710075 Xi'an,
Contact : Lawrence Chang, 86 29 86691978

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Engineering machinery use fuel oil purifier

Search in a category : Construction goods
Search in a category :
engineering, machinery, fuel, purifier
Germany 60386 Audio and Video
Philips - 3-in-1 Purificateur, ventilateur et chauffage - AMF220/15 - AMF220/15

Friday, July 08, 2022

Quantity : 100

Caractéristiques Taux de purification d'air 165 m³/h Approprié pour une salle jusqu'à 42 m² Nombre de vitesses 3 Minuteur Oui Fonctions des purificateurs d'air Fan, Heating Niveau de son (vitesse lente) 47 dB Niveau de son (vitesse rapide) 61 dB Capteur PM2.5 Oui Capteur de particule...

MaKant Europe GmbH & Co. KG

  • 60386 - Frankfurt am Main
  • +49 (69) 9 150 750 14
France 518106 B2B Services
Precision CNC Milling 6061-T6 Aluminum Machined Parts

Friday, January 05, 2024

Are you looking for a high-quality custom precision aluminum machining supplier? YS rapid is a CNC milling components factory with many years of experience in making CNC milling aluminum parts, with advanced CNC milling, CNC lathes, and other equipment, enabling us to process turning...

YS RAPID MANUFACTURING LIMITED

  • ysrapid
  • 518106 - shenzhen
  • 8615817251032
France 518106 Second hand goods
CNC Machining Copper

Thursday, April 27, 2023

With extensive production experience, YS Rapid offers copper cnc machining service and copper machinery parts to various applications. One-stop CNC machining facilities and various manufacturing capabilities enable us to well manufacture complex copper parts of various sizes and specifications...

YS RAPID MANUFACTURING LIMITED

  • ysrapid
  • 518106 - shenzhen
  • 8615817251032