Everything else / Bulk

DMF-Z Right Angle Electromagnetic Pulse Valve

Price : 10-30USD

DMF-Z Right Angle Electromagnetic Pulse Valve Product introduction:

The electromagnetic pulse valve is imported from abroad (also known as the diaphragm valve) is the compressed air "switch" of the pulse bag filter dust cleaning system is controlled by the output signal of the pulse injection controller, and the filter bag is cleaned by the row (chamber). Ash, so that the dust collector's resistance is maintained within the set range, in order to ensure that the dust collector processing capacity and vacuum efficiency.

DMF-Z Right Angle Electromagnetic Pulse Valve Features:

The DMF-Z electromagnetic pulse valve is a right-angle valve. The angle between the inlet and outlet is 90°. It is suitable for the mounting connection between the helium cylinder and the dust blower tube. The gas flow is unobstructed, and it can provide the turbulent gas flow that meets the requirements.

DMF-Z Right Angle Electromagnetic Pulse Valve working principle:

The diaphragm divides the electromagnetic pulse valve into two air chambers, front and rear. When the compressed air is turned on, the compressed air enters the rear air chamber through the throttle hole. At this time, the pressure of the air chamber presses the diaphragm against the output of the valve. The pulse valve is in the "closed" state.

The electric signal of the pulse injection controller causes the electromagnetic pulse valve armature to move, the air chamber vent hole opens after the valve, the rear chamber quickly loses pressure, the diaphragm moves back, the compressed air is blown through the valve outlet, and the electromagnetic pulse valve is "opened" status.

Pulse injection control instrument electrical signal disappeared, electromagnetic pulse valve armature reset, after the air chamber vent hole closed, the rear chamber pressure increased so that the diaphragm close to the valve output, the electromagnetic pulse valve is in the "closed" state.

If you are looking for diaphragm pulse valve manufacturers, Senotay can be a competitable one among those diaphragm valve suppliers. Contact us to get more information about our products!

Location : MOJIABALI VILLAGE WALIWANG TOWN BOTOU CITY CANGZHOU CITY HEBEI PROVINCE, 062150 cangzhou,
Contact : Wei Yueqiang, 0317 8288592

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
DMF-Z Right Angle Electromagnetic Pulse Valve

Search in a category : Everything else / Bulk
Search in a category :
valve, angle, pulse, electromagnetic
Taiwan 114 Equipment goods
Electric charcoal lighters for BBQ

Tuesday, December 09, 2025

Product ID: CS500ZP-800W Powered by a 800W stainless steel heating element, this electric charcoal lighter ignites charcoal in just 8-10 minutes without without lighter fluid or charcoal chimneys. The Z shape of the heating element can be easily place in the grill when start-up...

CHUN TAI ELECTRIC CO., LTD.

  • chuntai
  • 114 - TAIPEI CITY
  • +886 2 87512922
Taiwan 24158 Equipment goods
CNC Dielectric Fluid EDM (Standard) Series S50,S60,S90

Thursday, August 06, 2015

Quantity : 30 sets

The X. Y& Z axis utilizes AC servo motor. Multi-cavities machining, ORBIT-CUT machining & Helix machining. A.T.C. (Automatic Tool change) & C-axis machining available. The Circle Angle of Sparking is lower than 0.02mm. The best surface roughness (Ra) is better than 0...

Sane Kuei Machinery Co., Ltd

Taiwan 24158 Equipment goods
CNC Sliding Single-Column EDM Series M430~M3010

Thursday, August 06, 2015

Quantity : 30 sets

The X. Y& Z axis utilizes AC servo motor. Multi-cavities machining, ORBIT-CUT machining & Helix machining. A.T.C. (Automatic Tool change) & C-axis machining available. The Circle Angle of Sparking is lower than 0.02mm. The best surface roughness (Ra) is better than 0...

Sane Kuei Machinery Co., Ltd