Algomtl
svgfair.com
 
Details
China Raw materials
Raw materials

Diamond Wire Saws

(1)Nearly unlimited wall thickness (2)The most widely, different materials (3)Different cutting guides 4)Highest flexibility with the positioning of the machine (5)Ideal with limited amount of space (6)Can be done under the water The diamond wire saws can be considered as the most technologically advanced solution for cutting marble, granite and other stones with the best results in term of low production costs and reduction of waste material. Compared to traditional methods, a quarry can be exploited as regards quality and varied needs. When squaring blocks diamond wires make full use of frames to improve overall production and above all the save in sawing and energy cost.
Location : , 100007 Beijing,
Contact : Alec Lee, 86 10 64922468

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Diamond Wire Saws

Search in a category : Raw materials
Search in a category :
saws, diamond, wire
Taiwan 330 Audio and Video
Bottom plate Speakers part made in Taiwan

Wednesday, October 21, 2020

SHINING JINS ENTERPRISE specializing in manufacturing & designing cold forge Top Plate (Washer) and Pole piece (T-Yoke) for Loud-Speaker and alarms raw driver in Taiwan. We offer a complete range of Top Plate (Washer) and Pole piece (T-Yoke) uses in Home speaker, P.A. Speaker...

Shining Jins Enterprise Co., Ltd.

  • jsicyoke
  • 330 - Taoyuan City
  • +88 6 33 61 06 38
France 201615 Everything else / Bulk
Specialty Epoxy Resins

Friday, May 31, 2024

Price : $12~15/kg

Tetra specialty resin chemical offers two product categories with speciality resin and glycidyl amine epoxy resin. These products have various features on dilution ability, glass transition temperature, adhesion, volume shrinkage, and migration. Therefore, they have been widely applied...

Jiangsu Tetra New Material Technology Co., Ltd.

  • 201615 - Songjiang
  • 0086 2154265697
Taiwan 330 Electronics / Computers
T-Yoke Bottom Plate Speakers part made in Taiwan

Wednesday, October 21, 2020

Shining Jins Enterprise Co., Ltd. specializing in manufacturing & designing cold forge Pole piece (T-Yoke) for Loud-Speakers and alarms raw driver in Taiwan. Production capacity: T-Yoke/Pole Piece : Diameter of Piece : 28mm up to 250mm Diameter of Pole : 10mm up to 70mm Length of Pole ...

Shining Jins Enterprise Co., Ltd.

  • jsicyoke
  • 330 - Taoyuan City
  • +88 6 33 61 06 38
 
Secure payment

Information

Top search