Everything else / Bulk

Development System of BMC Rotor Mould

Price : 100USD

At present, in the development process of BMC mold, the BMC composite material is thermosetting resin. In the process of mold heating and curing, because of the expansion performance of BMC material, the pressure in the mold cavity suddenly increases, which makes it difficult to demould the BMC products, and the products are difficult to separate from the mold. Especially some products with long straight surface can not separate from the mold, resulting in die scrap and product development failure.

The BMC Rotor Mold can successfully complete the production process. Compared with the existing technology, it has the following advantages: there is a long straight surface product in the BMC rotor moulding, so it can not be separated from the mold, and it can be used when it can not set a large demoulding slope on the product surface. In the process of mold locking, the lock insert is locked up and down through the lock surface, so that the insert will have a fully fitted balance state, and the fit between the insert and the middle sleeve plate will leave a large space for fit clearance, which effectively prevents the die expansion during the injection molding process. When opening the die, the lock surface is removed and the insert is peeled off from the product quickly, so that the ejection production process can be completed smoothly and the stability of the whole die can be further improved.

If you want to know more details of bulk molding compound process, please visit our website.

Location : No.62,zhidailang,sha village,luoshe town, deqing,huzhou city, zhengjiang, China., 313218 huzhou,
Contact : Li Coffee, +86 15657163173

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Development System of BMC Rotor Mould

Search in a category : Everything else / Bulk
Search in a category :
mould, system, development, rotor
Hong Kong 999077 Equipment goods
Unitronics OPLC Jazz

Saturday, April 18, 2026

Unitronics OPLC Jazz – Automate Control Engineering Ltd. (winston@automate-ace.com) Jazz : micro PLC with text-based HMI Replace that “smart relay” with a real PLC—for the same low price. Jazz is a full-function Programmable Logic Controller with onboard I/Os and a built-in Operator Panel...

Automate Control Engineering Ltd.

Hong Kong 518102 Equipment goods
CPU fan controllerwith LED display

Sunday, February 26, 2017

Quantity : 500 - Price : 12,00 €

♦ Functions * 1-channel temperature monitor * 2-channel fan speed control * 4-level fan speed control (manual) * Fan speed storage function * Immediate visual indication of Fan operation ♦ Buttons * POWER: Turn off the system power * UP: Increases fan speed ( level 1–...)

Tengda Electronics Limited

  • simeongao
  • 518102 - hongkong
  • +85 2 21 10 18 65
France 518000 Construction goods
photo not available

Friday, November 27, 2015

Quantity : RMB - Price : 1 000,00 €

Zhong Xin Hua Group was founded in1999,which has always insisted on the objective of creating a world class brand and devoting to create a hi-tech PCB enterprise in the past ten years .Now ,ZXH has set up four production bases in Shenzhen ,Foshan,Shangrao and ji an to produce high...

Shenzhen Zhongxinhua Electronics Co.,Ltd

  • 518000 - Shenzhen
  • 86 0755 6122886