Dental Lab Equipment

Dental lab productsThe dental laboratory is a place to complete all the tasks that the patient does not participate in the oral medicine, such as making dentures, model making, polishing, etc. The laboratory with good conditions can carry out porcelain teeth, casting brackets, etc. The other is called The dental laboratory is a place specializing in the production (making) of dentures, and the location is generally not in the hospital. The tools commonly used in dental laboratories are Gypsum settling basin,Micromotor,Dental Vibrator,dental implant machine Dental Lab Workbench,etc.

Gypsum Settling Basin

Nowadays, orthodontics has attracted more and more attention.During the manufacturing process of the dental appliance, the impression is taken from the patient's mouth and then placed in.

Dental Lab Micromotor

It is an important part of china dental lab equipment, mainly used for grinding, polishing and cleaning in the process of denture restoration.

UM-LZ304 Resin Teeth Tray Polymerizer (Curing Bath)

At present, domestic denture factories mainly use gas or electric heating to heat the wax washing container to 100℃, and put the mold box into it for 10 minutes.

Pen Type Sand Blasting Machine

This unit is used for polish the surface of porcelain crowns, it is a necessary equipment in dental lab.

JT-08 Manual Centrifugal Casting Machine

Manual centrifugal casting machine is a common technical equipment in prosthodontics department. It no longer needs crucible when casting, but can directly put the alloy material into the cavity of the casting mold after melting.

JT-09 Dental Visualizer

The Dental Visualizer is mainly used for model design in the dental lab of dental department. It is simple to operate, convenient to use and strong applicability.

JT-10 Dental Visualizer

Mainly used for observing models in dental laboratory model design.

JT-11 Squeezer

This is a simple press and a dental double press with denture flasks, used for making denture models.

JT-12 Denture Flasks

The denture flasks is a very common appliance in the process of complete denture processing. It is composed of an upper box and a lower box.

JT-14 Dental Vibrator

This machine is used for duplicating or pouring plaster and agar .It can remove bubbles in molds ,make the fillings homogeneous and dense.

JT-15 Wax Pot

This is a three wax melt machine, can melt three different wax blocks at the same time, easy to operate, shorten the working time, improve efficiency.

JT-16 Laser Pin

Laser nail planting machineThis machine is dental precision equipment, using laser positioning, to ensure the accuracy of nail hole.

JT-17 Arch Trimmer

Arch Trimmer is used to polish the lingual side of the denture model. The processing process of the Arch Trimmer mainly includes two processes: lingual grinding and dust cleaning.

JT-18 Vaccum Former

Dental vacuum Forming Machine is specially designed for dental applications. Our efficient portable unit delivers powerful suction and the highest level of performance.

JT-19 Model Trimmer

Model Trimmer are widely used in restorative dentistry. It is a necessary tool for trimming plaster models, This machine is made of rust-proof all-cast aluminum.

JT-21 Eelectric Wax Knife

This dental lab electric waxer is for dental, jewelry trade, industry, industry of die carving, wax carving and so on.

JT-22 Squeezer

This is a single compressor that is used to make dental models, Made of stainless steel, durable.

JT-25 Rotable Gas Light

Dental gas burner, its flame can be used to heat and sterilize dental equipment, microbiology and other equipment, can also be used to remove burrs, polish molded plastics and clean rubber parts.

JT-24 High Technician Cutting Machine

It is one of the special equipment for technicians. It is mainly used for cutting castings. A good metal cutting machine should have the characteristics of stable performance, low noise, small volume, small vibration, dustproof and easy operation.

JT-26 Dust Collector

This unit is for dust extraction in dental labs. It can be used with sandblasters, lathes, grinders, and workstations etc.

JT-27 Digital 4-Well Pot

This is a 4 well wax melting machine, can melt four different wax blocks at the same time, and with digital display, high-end atmosphere, easy to operate, shorten the working time, improve efficiency.

JT-28 Digital 1-Well Pot

The wax melt machine is used in the oral industry to melt all kinds of wax. This product melts wax quickly and can be kept in the liquid state.

JT-36 Tiny Wax Knife

This product is a professional dental laboratory equipment, electric carving and paraffin wax model molding equipment, easy to adjust temperature, carries on the precision of paraffin operation,

JT-45 Alone Duct Gas Light

Dental Technician Tilting single tube gas lamp propane lamp Dental Technician Gas Bunsen lamp The Bunsen burner burns gaseous fuel safely. The flame does not flow back into the gas supply pipe.

JT-47 Squeezer

Dental Equipment Technician Equipment Boiler Dental Box Squeezer Denture Processing Double Dental Squeezer.

JT-49 Desktop Suction Base

The Dust Collector is a vacuum device, it is used with sandblasters, polishing machines and laboratory tables for dust collecting. It has the advantages of: lowest noise, small size and very strong vacuum power.

JT-50 2 IN 1 Waxing Unit

This is an imaginative constructure and ingenious two-in-one Multifunction Waxing Unit,which combines the function of the wax with the function of electricity wax knife together perfectly.

The significance of dental laboratory

The dental laboratory is the workplace of the technician. Like the dental clinic, it is one of the indispensable organizations for the restoration process. The working status of the formula directly affects the quality of the dental restoration.

Infection control in dental laboratories

Workers in the laboratory may be exposed to various pathogenic microorganisms, which may cause infectious diseases. Therefore, it is necessary to avoid this situation

1. The staff should pay attention to their own protection, wear protective clothing, masks, protective goggles, hats, gloves, etc.

2. All impressions, restorations, relationship recorders, models, etc. taken out of the patient's mouth must be disinfected before being sent to the laboratory. All items that have been in contact with the patient must be washed away from the saliva and blood debris, and then disinfected

3. Regular studio disinfection

4. Dispose of waste materials in the laboratory reasonably according to the regulations of the relevant departments

Advantages of UMG dental laboratory equipment

1. Professional manufacturer of dental technician equipment

2. Ex-factory quality assurance and low price

3. Professional one-to-one after-sales service

We have types of dental lab equipment for sale, if you have needs, please contact us.

Now the dental instrument price is affordable, if you want to buy dental cabinet, please leave us a message.