CUCW-N142 Unitized Curtain Wall
Model No. CUCW-N142 is a self-designed, tested, and certificated unitized curtain walling system by CAS team. It is a cost efficient and performance unitised curtain wall system, which combines minimal aesthetics with structural stability. Its structural silicone glazing construction offers maximum transparency at the external surface of the facade. Modular units, including glazing panes, are prefabricated in workshop conditions and this results in a fast and economic installation with minimum manpower and tooling requirements. This construction mode, renders CUCW-N142 an ideal unitised system for high rise buildings,where meeting demanding deadlines is a prerequisite.
Overview of CUCW-N142 Unitized Curtain Wall
|
System |
Unitized Curtain Wall(Non-Thermal Break) |
|
Model No. |
CUCW-N142 |
|
Material |
Aluminum Alloy/Glass/Aluminum Sheet/Aluminum Composite Panel/Galvanized Sheet |
|
Glass Type |
Tempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak |
|
Cooperated Glass Brand |
Vitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/King/CNG/Ta iwanGlass |
|
Surface Treatment |
Powder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain |
|
Profile Brand |
6063-T5/6063-T6/6061-T6(Brackets) |
|
Thermal Profile |
Non-Thermal Break |
|
Standards |
In Compliance With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO |
|
Application |
Residential Apartment, Villa/Commercial Hotel, Mall, Office, Public Organization |
|
System Customziation |
Available |
Data of CUCW-N142 Unitized Curtain Wall
Testing Data of CUCW-N142 Unitized Curtain Wall
|
Test |
Pressure |
Results |
|
Preloading(Clause 8.2.2 of AS/NZS4284: 2008) |
+1.46kpa |
No separation, plastic deformations, or deleteriousness was observed. |
|
-1.90kpa |
||
|
Preliminary Water Test under Static Pressure (Clause 8.2.3 of AS/NZS 4284: 2008) |
+438kPa |
There were no leaks. |
|
Preliminary Water Test under Cyclic Pressure (Clause 8.2.3 of AS/NZS 4284: 2008) |
219-438-219 (Pa) |
There were no leaks. |
|
292-584-292 (Pa) |
||
|
438-876-438 (Pa) |
||
|
Structural Test at Serviceability Limit State Wind Pressure (Walls)(Clause 8.3 of AS/NZS 4284: 2008) |
+1.46kpa |
During the structural test at SLS wind pressure, the deflections of all related members were within the allowable deflection limits. |
|
-1.90kpa |
||
|
Air Infiltration Test (Clause 8.4 of AS/NZS 4284: 2008) |
+/-150Pa |
The rate of air leakage of the specimen was within the allowable values. |
|
Water Test under Static Water Test under Static 4284: 2008) |
+438Pa |
There were no leaks. |
|
Water Test under Cyclic Pressure (Clause 8.6 of AS/NZS 4284: 2008) |
219-438-219 (Pa) |
There were no leaks. |
|
292-584-292 (Pa) |
||
|
438-876-438 (Pa) |
||
|
Structural ProofTest at Ultimate Limit State Wind Pressure (Wells) (Clause 8.8 of AS/NZS 4284: 2008) |
+2.26kpa |
No collapse of the test specimen was observed under the specified pressure. |
|
-2.94kpa |
||
|
Seal Degradation Test(Clause 8.10 of AS/NZS 4284: 2008) |
219-438-219 (Pa) |
No water leakage was observed. |
|
292-584-292 (Pa) |
||
|
438-876-438 (Pa) |
Thermal Data of CUCW-N142 Unitized Curtain Wall
|
NFRC Procedures |
NFRC100SB, NFRC200-2010, and NFRC500-2010 |
|
Software Tools |
THERM 7.4.3.0 and WINDOW 7.4.6.0 |
|
Configuration |
6 CLR-TDE33D 8mm HS #2 + 12AR + CLR 10mm HS IGU |
|
Panel Dimension |
1505mm Wide 2945mm High |
|
Frame |
Painted Aluminum |
|
Panel U-value |
2.765W/m2k |
|
Visible Light Transmission |
0.246 |
|
SHGC |
0.179 |
Frame Data of CUCW-N142 Unitized Curtain Wall
|
Parts Location |
Frame Area/m2 |
Edge Area/m2 |
U-Value(Frame) |
U-Value(Edge) |
|
W/m2k |
W/m2k |
|||
|
Header |
0.058 |
0.086 |
4.1858 |
1.1968 |
|
Left Jamb |
0.127 |
0.166 |
14.8377 |
1.6873 |
|
Right Jamb |
0.127 |
0.166 |
23.7685 |
1.9897 |
|
Sill |
0.328 |
0.086 |
5.7542 |
1.5668 |
Glass Data of CUCW-N142 Unitized Curtain Wall Manufacture
|
Glass Data: CLR-TDE33D 8mm HS #2 + 12AR + CLR 10mm HS IGU |
|||||||
|
Visible Light |
SHGC |
SC |
NFRC U-value |
STC |
|||
|
W/m3k(Argon) |
|||||||
|
T% |
R-out% |
R-in% |
Winter |
Summer |
|||
|
29 |
19 |
15 |
0.19 |
0.22 |
1.55 |
1.54 |
36 |
Benefit of CUCW-N142 Unitized Custom Curtain Wall
Guaranteed waterproofness & airtightness
Great quality control from factory
Lower on-site installation cost
Shorter project schedule
Enhancement of natural light
Increased static robustness, even in extreme natural phenomena
Minimum after sales service & maintaining
Increased comfort level
If you want to know more details of unitised system facade, please visit our website.
Contact : facade Cas, 0757 87655056
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of CUCW-N142 Unitized Curtain Wall Search in a category : Everything else / Bulk Search in a category : cucw, curtain, unitized, wall, n142 |
Saturday, February 20, 2016
Price : 50 USD PER KG
- WELCOME TO KRATOM CRAZY - Welcome to Kratom Crazy. We offer premium kratom at competitive prices. Our kratom powder is extremely high-quality and is backed by a full 30-day satisfaction guarantee. We are confident that you will find the alkaloid percentage of our kratom strains...
Khun Jack Partnership Ltd
- 5000 - Chaing Mai
- +66 9 68 75 20 43
Wednesday, September 14, 2016
Quantity : 5000 - Price : 100,00 €
Bellows Seal Stop Valves (Angle Type) DIN Angle Type Bellows Sealed Stop Valve DIN Bellows Seal Globe Valve DIN Faltenbalgventil Eckform DIN Válvulas de fuelle(Paso angular.) DIN ventil uzavírací s vlnovcem rohový DIN Standard seteventil med belg (Vinkel modell) DIN Standardında...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Gland Packing Globe Valves ( Straight- Through Type) DIN Standard Gland Packing Globe Valve DIN Globe valve DIN Stop valve DIN Absperrventil Durchgangsform DIN Válvulas de globo DIN ventil uzavírací s klasickou ucpávkou přímý DIN Standard seteventiler med pakkboks (rett løp...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935





