Raw materials

CSA Expansive Additive

Quantity : 2000T/Mont

CSA expansive additive description:

The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with ordinary cement and hydrated, cement mortar or concrete expands during the early stages of hydration. It is developed to reduce and compensate the hydraulic shrinkage of cement based construction products. Its performance is similar to Denka CSA #20, which is now widely used in the formulation of different mortars in Europe countries.

As a fire brick supplier, we offer two types of these CSA expansive additives, the main specifications are according to JC476-2001

CSA expansive additive technical data:

Parameters

CSA Expansive additive I

CSA Expansive additive II

MgO %

≦ 5.0

≦ 5.0

Water content %

≦ 3.0

≦ 3.0

Total Alkali %

≦ 0.75

≦ 0.75

Chloride ion %

≦ 0.05

≦ 0.05

Specific Surface Area

≧200m2/kg

≧200m2/kg

Fineness

1.18mm residue

≦ 12

≦ 12

Setting time

Initial setting time

≧ 0: 45

≧ 0: 45

Final setting time

≦ 10: 00

≦ 10: 00

Limited Expansive Rate (%)

7 days in water

≧0.025

≧0.05

21 days in air

≧-0.020

≧-0.010

Compressive strength
MPa

7days

≧25

≧25

28days

≧45

≧45

Bending strength
Mpa

7days

≧4.5

≧4.5

28days

≧6.5

≧6.5

CSA expansive additive performance:

  1. As making shrinkage compensated concrete, if the ratio of reinforcement is 0.2%-1.0%, the limited expansive rate will be in the range of 0.02-0.04%, and a prestress of 0.2-0.7Mpa exists in the concrete.

  1. Comparing with the concrete without Expansive Additive, in the condition of defined mixing amount, the free strength of the concrete with Expansive Additive is roughly equal to that of concrete without Expansive Additive. The limited strength is 10~15% higher than free strength.

  1. The impermeability grade of mortar and concrete can reach over S30. The elastic ratio closes to that of common concrete.

  1. Anti freezing: D150.

(5) Sulphate resistance of concrete is increased. No pollution to water.

CSA expansive additive application:

  1. For structural self-waterproofing construction. Effectively preventing cracking or leakage of concrete.

  1. To extend the space length of post casting zone of cast-in-place overlength structure.

  1. To control the crack producing result of temperature difference in large sized structural concrete.

  1. For rigid roofing.

(5) Making non-shrinkage cements.

CSA expansive additive packing:

By 50kgs bags or jumbo bags.

CSA expansive additive Storage:

Store in dry place, guard against damp. Warranty period: 1 year.

For the special cement products, it includes calcium aluminate cements (CA cement)and calcium sulfoaluminate cements (CSA cement/CSA binder). The CSA cement is more and more imported by GRC manufacturers and dry mix mortars manufactures because of its higher performance compare to the Portland cement such as fast setting time, rapid hardening and high strength in 3 days.

Location : JINRONG B/D NO. 116 XINHUA WEST ROAD, 063000, TANGSHAN, HEBEI, CHINA, 63000 tangshan,
Contact : Zhao Anna, 03155392228

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
CSA Expansive Additive

Search in a category : Raw materials
Search in a category :
expansive, additive
China 361000 Construction goods
Aac blocks

Wednesday, May 07, 2014

Quantity : 100000 - Price : 55,00 €

- Specifications - light weight aac block High quality competitive price outstanding service light weight aac block 1.SIZE: 60*20*8cm; 60*20*10cm ; 60*20*12cm ;60*20*15cm ; 60*20*18cm;60*20*20cm ; 60*24*8cm 60*24*10cm ;60*24*12cm; 60*24*15cm; 60*24*18cm;60*24*20cm 2.Technical...

China 451200 Equipment goods
photo not available

Tuesday, August 04, 2015

Price : USD80000-100000/Set

Product Description 1) Reasonable structure 2) High pressure extrude 3) Trowel with wear-resistance metal spay 4) Optional install 5) Stability Specifications: 1.high quality carbon and alloy steel weld , remove welded stress by quench's heat handling 2.use floating trowel...

China Gongyi Yuanhang (Group) Machinery Equipment Co.,Ltd

  • 451200 - Gongyi
  • +86 371 85669181
  • +15 5 03 71 83 90
China 451200 Equipment goods
Tunnel Kiln Ferrry Pusher with Hydraulic Pressure

Thursday, August 06, 2015

Price : US $ 10,000 - 12,000

Tunnel Kiln Ferrry Pusher with Hydraulic Pressure Hydraulic Ferry Pusher for Brick Making Line Product Features: 1) Hydraulic push 2) Push kiln car 3) Low invest, save labors 4) Stable work 5) Reasonable price Specifications: 1. Auxiliary brick making machine line &...

China Gongyi Yuanhang (Group) Machinery Equipment Co.,Ltd

  • 451200 - Gongyi
  • +86 371 85669181
  • +15 5 03 71 83 90