RESISTANCE - 14376 ads

Friday, December 29, 2023

Aluminum Non-standard Parts Non-standard precision parts hardware processing is the raw materials (stainless steel, copper, aluminum, iron ... ... ) We use lathe, milling machine, drilling machine, polishing machine, etc. to make various high-precision parts according to customer's...

Friday, December 29, 2023

Fiber optic cable china is a communication cable consisting of two or more fiber optic cores made of glass or plastic in a protective coating covered with an outer PVC plastic sleeve. Signal transmission along internal optical fibers typically uses infrared. How Strong Is OFC Optical Fiber Cable...

Friday, December 29, 2023

405nm is widely using in disinfection, bacterial disease cure,or microbial infection prevention etc. It does no harm to human. But it's blue not friendly for eye view. Feton LED chip model COB SW1919-40W-40FR90 emits this disinfection blue light as white. Lighting while disinfection...

Thursday, December 28, 2023

The system is not only as simple as wiping the water off the windshield, but also wipes the rainwater on the glass surface into a uniform water film layer, allowing the light to pass through smoothly without refraction to ensure the driver's vision is clear and safety driving. At present...

Thursday, December 28, 2023

Because of legal requirements, almost everywhere cars must be equipped with windshield wiper cutter. The windshield wiper cutter also has the characteristics of heat resistance, cold resistance, acid and alkali resistance, corrosion resistance, can fit the windshield, reducing the...

Thursday, December 28, 2023

The Pencil Type Ignition Coil combines the high-voltage ignition wire and the ignition coil into one, which reduces energy loss, and improves combustion and fuel efficiency. Each cylinder is assigned a pencil ignition coil, which is directly installed on the top of the spark plug...

Thursday, December 28, 2023

The oil-filled ignition coil is the first generation coil of the vehicle. It is an open magnetic circuit ignition coil from MAMPS ignition coil factory , which is generally a filling structure. It is made of oil, and the oil-filled inside is both an insulator and a coolant. It must...

Thursday, December 28, 2023

Nickel alloy spark plugs are the most common and relatively cheap car spark plug. Nickel spark plugs's core material is nickel, which is a magnetic, silver-white transition metal, and has a melting point of 1453°C. Nickel spark plugs have a short life and are not as resistant to high...

Thursday, December 28, 2023

MAPMS supplies car rubber boots for COP and pencil ignition coils, which is made of high-quality silicone, and with withstand high pressure over 40KV and high temperature up to 300 degrees. Bulk buy from ignition rubber boots MAMPS ignition coil factory. Ignition Rubber Boots Key...

Thursday, December 28, 2023

Low-temp flanges are widely used in the manufacture of flanges and fittings, as well as in applications where low-temperature service is required and corrosion resistance is not critical. LOW-TEMP FLANGES PROVIDED BY YUHONG As one of the professional industrial flanges manufacturers in China...

Thursday, December 28, 2023

A low-temperature alloy is a general purpose carbon steel, usually in the normalized, normalized, and tempered or quenched and tempered condition. It is typically characterized by moderate strength and impact toughness and is widely used in the manufacture of flanges and fittings...

Thursday, December 28, 2023

Inconel flange is suitable for harsh environments at high temperatures and pressures with good mechanical properties. As a professional Inconel flanges manufacturer in China, Yuhong Group provides quality Inconel flanges including: Inconel 600 flanges, Inconel 601 flanges, Inconel 625 flanges...

Thursday, December 28, 2023

Good resistance makes INCONEL suitable for Inconel pipe fitting in harsh environments at high temperatures and pressures. When the Inconel alloy is heated, a thick and stable oxide layer is passivated on the surface of the alloy to protect the interior of the alloy from corrosion...

Thursday, December 28, 2023

Inconel alloy 600 has corrosion resistance to many kinds of corrosive media. Chromium content made this material with better corrosion resistance than Nickel 99.2 (alloy 200) and Nickel 99.2 (alloy 201, low carbon) in the oxidizing environment. Meantime, high Nickel content makes...

Thursday, December 28, 2023

Yuhong incoloy 800h flange&incoloy 825 flanges use Incoloy alloy 800&825, which is a nickel-iron-chromium base superalloy, to ensure great carbonization and oxidation resistance even in high-temperature environments. INCOLOY 800&825 FLANGES PROVIDED BY YUHONG Incoloy class...

Thursday, December 28, 2023

Incoloy is a nickel-iron-chromium base superalloy that resists carbonization and oxidation in high-temperature environments. Incoloy metal alloys are easy to manufacture, using the same machines and processes as stainless steel. Incoloy fitting is primarily chromium and nickel-based...

Thursday, December 28, 2023

PEEK Seal Material in Mechanical PEEK is a kind of mateiral with both rigidity and toughness, excellent mechanical properties, wear resistance, self-lubrication, high temperature resistance, creep resistance and dynamic fatigue resistance, can be widely used for wear-resistant lubricating...

Thursday, December 28, 2023

Compression Molding PEEK PEEK has excellent corrosion resistance, radiation resistance, high-temperature resistance, low-temperature resistance, hydrolysis resistance and good electrical properties, can be used under high temperature, high pressure and high radiation and other harsh...

Thursday, December 28, 2023

Polyetheretherketone PEEK for Medical Applications PEEK medical grade has good biocompatibility, non-toxicity, low density, and excellent mechanical properties. Its elastic modulus is very close to human bones. The peek medical material can be circularly disinfected by ethyl , steam thermal...

Thursday, December 28, 2023

Peek in Bearing Material Due to its excellent mechanical strength, dynamic fatigue resistance, high-temperature resistance, creep resistance, self-lubrication and thermal expansion coefficient comparable to metals, PEEK material is replacing more metals and other engineering plastics...

Thursday, December 28, 2023

Natural PEEK Plastic Applications PEEK polyetheretherketone raw material has excellent comprehensive properties and can replace traditional materials such as metals and ceramics in many special fields. PEEK has applications in mechanical engineering, aerospace, automotive industry...

Thursday, December 28, 2023

Peek Tubing Material PEEK has great machinability, excellent dimensional stability, high-temperature resistance, creep resistance and hydrolysis resistance, can be used in a variety of machining ways, easy to control the tolerance. Applications: Sheets/ Rods/ Tubes/ 3D Filaments...

Thursday, December 28, 2023

PEEK is a C-level insulating material, keeps excellent insulating properties under high temperature, high pressure, high humidity and other environments, has wave permeability, dimensional stability and self-lubrication, keeps lower dielectric dissipation factor under various frequencies...

Thursday, December 28, 2023

TITANSUHE's g80 chain rating is a kind of round steel chain that specially designed for lifting and lashing purpose. For lifting application, we have fine tolerance g80 lifting chain to rigging hoist and medium tolerance chain to rigging chain sling. No matter for which purpose...

Thursday, December 28, 2023

Structured with a safety bolt, this shackle offer a double safety. The bolt, nut and safety pin prevents accidental unscrewing during lifting operation. Galvanized surface offers a long-term durability of corrosion resistance. Particularly important for use offshore and it is can...

Thursday, December 28, 2023

Aluminum Die Casting Mold When working at high or low temperatures, they also maintain good mechanical properties and have good corrosion resistance. properties and antioxidant properties. Die castings are widely used in construction, hardware, equipment, machine tools, ships, aerospace...

Thursday, December 28, 2023

6061 Aluminium Tube aluminium round tube is a kind of non-ferrous metal tube, which is made of pure aluminum or aluminum alloy by extrusion and is hollow along its longitudinal length. It can have one or more closed through holes with uniform wall thickness and cross section. Application...

Thursday, December 28, 2023

China 6061 Aluminum Sheet The combination of magnesium and silicon in 6061 aluminum allows it to be heat treated to higher strength levels. It has good formability when in the fully soft, annealed condition and the strength can be significantly increased following a heat treatment...

Thursday, December 28, 2023

6061 Aluminium Round Bar Aluminum Round bar ( Rod ) may be cold finished or extruded and Aluminum Round Bar (Rod) is availble in various alloys offering a range of weldability, corrosion resistance and machinability. High strength Aluminum Round Rod can be used in aerospace applications...

Thursday, December 28, 2023

China 5754 Aluminum Sheet The 5754 sheet magnesium alloy content is between 2.6-3.6, which is a typical aluminum alloy plate in the Al-Mg series alloy. Application of China 5754 Aluminum Sheet 5754 aluminum sheet is the main material used in the automobile manufacturing industry (car doors...)