SCOPE - 1830 ads

Thursday, April 23, 2015

GDQ-J(b)-A pneumatic high vacuum damper valve(Angle Valve) is sealed by sylpho. Motivated by compressed air, it pushes the cylinder to up and down move with the valve rod by changing the direction of electromagnetism to transform the gas circuit direction, which drives the valve...

Thursday, April 23, 2015

GDQ-J(b) electronic and pneumatic high vacuum damper valve(Angle Valve) is sealed by sylphon and signaled by electrical signal as the valve switch and depended on the compressed air as the motive force to open or close the valve. The valve will be relied on the spring to close the...

Thursday, April 23, 2015

GD-J high vacuum damper valve(Angle Valve)is used to open or close the air current in the Vacuum system. The screw drive is adopted as the transmitted components to lift the valve, which are lighter and reliable in movement. GD-J is angle type and GD-S is three-way type with prepumping...

Thursday, April 23, 2015

GDC-J electromagnetic high vacuum damper valve is used to open or close the valve by electromagnetic and spring-return force, applying itself to open or cut off the air current within the Vacuum system. It allows to bear the atmospheric pressure over the valve sealed surface while...

Thursday, April 23, 2015

GD-J(b) manual high vacuum damper valve(Angle Valve) is one of the important components in the Vacuum system. The transmission component is in screw structure, depended on the hand power to revolve the wheel and open or close the valve.Applicable medium can be air and noncorrosive gases...

Thursday, April 23, 2015

DYC-Q series low vacuum electro-magnetic pressure difference valve is a new vacuum valve which has been installed in the gas inlet of the mechanical pump. The working principle is the valve and pump should be connected in the same power . When the pump stops working or power supply...

Thursday, April 23, 2015

GI-C series high-vacuum butterfly valve can control the airflow in the Vacuum system from 0°to 90°. he applicable active media of this valve are air, non-corrosive gas. GI-C series high-vacuum butterfly valve can ​control the airflow in the Vacuum system from 0°to 90°. he applicable...

Thursday, April 23, 2015

DDC-JQ series electro-magnetic vacuum gas valve is a special valve installed in rotary vane vacuum pump. The valve and pump should be connected in the same power. The pump start / stop directly controls the valve open / close. When the pump stops working or there is a sudden interruption...

Thursday, April 23, 2015

DDC-JQ-B series electro-magnetic vacuum gas valve is a special valve installed in rotary vane vacuum pump. DDC-JQ-B series electro-magnetic vacuum gas valve is a special valve installed in rotary vane vacuum pump. The valve and pump should be connected in the same power. The pump...

Thursday, April 23, 2015

GUD series electric vacuum ball valve is applicable for the medium flow of connecting or cutting off the pipelines in the Vacuum system. GUD series electric vacuum ball valve is applicable for the medium flow of connecting or cutting off the pipelines in the Vacuum system. The straightway...

Thursday, April 23, 2015

GDQ-J is angle type and GDQ-S is three-way type with prepumping. Applicable medium can be air and noncorrosive gases. GDQ pneumatic high vacuum damper valve(Angle Valve), motivated by compressed air, pushes the cylinder to up and down move with the valve rod by changing the direction...

Thursday, April 23, 2015

Compound molecular pump FF series FF series compound molecular pump is one of mechanical vacuum pumps which gaining superhigh vacuum by high speed rotator carrying gas molecules. It is constituted by turbo molecular pump and disc tractive pump. It simultaneously got speedy pumping...

Saturday, April 18, 2015

1. The machine is stable operation,easy to operate. 2. Small investment,quick effect. 3. Based on the investigation from home and abroad, we, Hengmei Better, have done a good job in technique innovation and material improvement, which makes the animal feed pellet machine getting...

Friday, April 10, 2015

FST800-224 Intrinsic-safety industrial pressure transmitter is a high precision, high stability product with kinds of optional parameters and LCD displayer, It is with HART protocol optional. Users can manage or calibrate parameters through computer or keys on panel. It is very easy to operate...

Friday, April 10, 2015

FST800-220 industrial pressure transmitter is sealed with the standard 2088 shell and is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to...

Friday, April 10, 2015

FST800-217 universal industrial pressure temperature sensor is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability...

Friday, April 10, 2015

FST800-216 high-temperature pressure transmitter is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in the...

Friday, April 10, 2015

FST800-215 explosion-isolated pressure transmitter is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in...

Friday, April 10, 2015

FST800-214 intrinsic-safety pressure transmitter is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in the...

Friday, April 10, 2015

FST800-213 HP-Type pressure Transmitter(high pressure)transmitter is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm...

Friday, April 10, 2015

FST800-211 universal industrial pressure sensor is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in the...

Friday, April 10, 2015

FST800-202 universal industrial HP-Type pressure sensor is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability...

Friday, April 10, 2015

FST800-201 universal industrial pressure sensor is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in the...

Friday, March 27, 2015

Quantity : 1000000000

For customers, they are most concerned about the price when choosing a set of equipment.To Raymond Mill, for example, the price is the first factor to influence the customers' choice. Raymond mill, With the economic development and technology progress, the increasing application...

Monday, March 23, 2015

FST800-201 universal industrial pressure sensor is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in the...

Monday, March 23, 2015

FST800-202 universal industrial HP-Type pressure sensor is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability...

Monday, March 23, 2015

FST800-211 universal industrial pressure sensor is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in...

Sunday, March 22, 2015

German Standard: Product Name Executive Standard Specificaiton Range (mm) Steel Grade Cold drawn seamless precision tube DIN2391 Φ3~80 x 0.5~8 ST35,ST37.4,ST44, ST45,ST52 Tolerance Table of Steel Tube: NAME Scope (mm) DIN series(mm) Out Diameter 3-30 ±0...

Monday, March 09, 2015

Refractory Sliding Plate for Hot Sale 1. Scope of Application: The sliding gate plate is used for steel making. 2. Physicochemical indexes: Item Al2O3 % C % Zr2O % A.P. % B.D. g/cm³ C.C.S M pa C.M.O.R M pa Refractoriness °C Body ≥70 ≤8 ≥2.7 ...

Monday, March 09, 2015

Ladle Sliding Gate Plate for Hot Sale 1. Scope of Application: The sliding gate plate is used for steel making. 2. Physicochemical indexes: Item Al2O3 % C % Zr2O % A.P. % B.D. g/cm³ C.C.S M pa C.M.O.R M pa Refractoriness °C Body ≥70 ≤8 ≥2.7 ...