PIGTAILS - 168 ads

Friday, November 11, 2022

Quantity : 5000pcs/we - Price : 100-1000

FBG Temperature Sensor CT-01 is made of high-voltage resistant insulating materials, and the sensing part is made of high-temperature thermal conductive ceramics, which has the characteristics of fast heat conduction; the product can be mainly used for temperature monitoring of power...

Thursday, October 27, 2022

Price : 1-100USD

Optical fiber distribution box, ODB for short. The distribution box is generally used for the wiring connection of optical cables and optical communication equipment, and the optical signal is led out by the optical fiber jumper through the adapter in the distribution box to realize...

Thursday, October 27, 2022

Price : 1-100USD

Fiber optic enclosure box, ODB for short. The distribution box is generally used for the wiring connection of optical cables and optical communication equipment, and the optical signal is led out by the optical fiber jumper through the adapter in the distribution box to realize the...

Thursday, October 27, 2022

Price : 1-100USD

A fiber coupled collimator is a fiber optic passive device which is a precise alignment of a pigtail and a lens. It can transform diverging light into parallel beam of light or couple the collimating light into a single fiber. It is widely applied in single mode fiber collimator...

Thursday, October 20, 2022

Optical termination box (OTB), is a compact fiber management box used for FTTH application. Fiber optic terminal box includes faceplate and drop cable protection box which can be used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system...

Friday, September 09, 2022

Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment. As a quality fiber optic patch cord factory, T...

Friday, September 02, 2022

Quantity : 5000pcs/we - Price : 100-1000Usd

Fiber displacement sensor DST-01 is used for long-term measurement of structural beams and large buildings or other concrete, steel structures, building settlements, displacements and landslides. The sensor is installed by pulling rope, which can accurately and quickly measure the...

Friday, September 02, 2022

Quantity : 5000pcs/we - Price : 100-1000Usd

FBG accelerometer AL-01 transmits the acceleration change to the FBG after the FBG is properly packaged inside, and calculates the acceleration by measuring the wavelength shift of the fiber grating combined with the fast fiber grating interrogation technology. The AL-01 adopts the...

Friday, August 12, 2022

Quantity : 50000-8000 - Price : 8-15USD

Optical termination box (OTB), is a compact fiber management box used for FTTH application. Fiber optic cable terminal box includes faceplate and drop cable protection box which can be used as a termination point for the feeder cable to connect with drop cable in FTTx communication...

Wednesday, June 29, 2022

Description of MIL-DTL-32139 Twist Pin Plug Contacts Super mil micro connector, Nano D-sub Twist pin technology with 0.635 mm (.025") contact spacing and nano miniature shells. The ideal solution for applications including aeronautics, space, military, medical and off-shore which...

Wednesday, June 29, 2022

Description of Micro Wireless Backshell Connector This type of device is designed to provide screening, sealing, and reparability.d connector backshells connect cable shields to Micro-D connectors, providing strain relief and mechanical protection. Engineered to help resist corrosion...

Wednesday, June 29, 2022

Description of Micro Wire Backshell Electrical Connector Different backshell types are available for Split EMI/RFI/filter or accommodate larger wire bundles or screw locks allowing the connectors to be fully mated before the hardware is fastened, or for wire or cable strain relief...

Wednesday, June 29, 2022

Description of Micro Solder Cup Contacts METAL SHELL of Micro Solder Cup Connectors Metal shell recommended for environmental and EMI applications. Ideal for prototyping or where pigtail type connectors cannot be used. PLASTIC SHELL of Micro Soldering Aviation Connectors Ideal for...

Wednesday, June 01, 2022

Surface mounted FBG temperature compensation strain sensor MST-01 is mainly used for optical strain measurement on the surface of various structures such as bridge steel box girder, shock absorber damper, metal anchorage and other metal structural parts. The sensor has built-in temperature...

Wednesday, June 01, 2022

Surface mounted FBG strain sensor MS-02 is mainly used to monitor the stress and deformation of various structural surfaces. The sensor is packaged with high-performance stainless steel material, and is installed on the surface of the monitored object by gluing or spot welding without...

Wednesday, June 01, 2022

Surface mounted fbg strain gauge MS-01 can meet the strain measurement needs of various occasions, and can be installed in different monitoring positions such as concrete surfaces or steel surfaces. Mainly used to measure the strain of steel structures and concrete surfaces. The external...

Wednesday, June 01, 2022

Embedded FBG temperature compensation fiber optic strain sensor EST-01 is mainly used for internal fiber optic strain measurement of concrete, reinforced concrete or plastic materials such as foundations, pile foundations, bridges, tunnels, linings, etc, so as to facilitate long-term...

Wednesday, June 01, 2022

Embedded FBG strain sensor ES-01 is specially used for the internal strain measurement of concrete, reinforced concrete or plastic materials, so as to observe the change of internal stress of the structure for a long time, conduct state analysis, and achieve the purpose of warning...

Wednesday, May 18, 2022

Fiber pigtail optical is a cable that only one end is terminated with connectors. The other end can be melted with optical fiber for a permanent connection. Copperled is one of fiber optic pigtail manufacturers, fiber optic pigtail suppliers, which would like to classify them from 2 aspects...

Tuesday, April 19, 2022

The drop cable pigtail is a fiber optic cable terminated with a factory installed connector at one end, leaving the other end terminated. Therefore, the connector side can be connected to the equipment and the other side can be fused with fiber optic cables. Fiber optic patch cords...

Thursday, February 24, 2022

Price : 10-30USD

Optical fiber distribution frame GPX-K rack mount cabinet is made of top quality steel alloy and treated with galvanizing, oxidation and electrostatic plastic spraying. The frame of small fiber optic cable patch panel cabinet has solid structure and pleasing appearance. Detailed information...

Thursday, February 24, 2022

Price : 10-30USD

Fiber optic stripper is used to peel 250um coating of 125um fiber optic, 1.98mm open pore at the top uses to peel protective covering of fiber optic pigtail. After manufacturers preset all of sizes, you do not need to adjust. All of cutting ends have precise mechanical tolerance to...

Friday, December 31, 2021

Keystone Jacks are female connectors used in data communications, particularly local area networks (LANs). The jacks are usually mounted in wall plates or patch panels. As a professional keystone supplier, Copperled can provide from Cat.3 to Cat.8 network Keystone Jack with RoHs...

Friday, December 31, 2021

Fiber optic pigtail is a cable that only one end is terminated with connectors. The other end can be melted with optical fiber for a permanent connection. Copperled is a fiber optic pigtail manufacturer, which would like to classify them from 2 aspects, one aspect by connectors, including E2000...

Sunday, November 28, 2021

Discovering a range of PM fiber assemblies, including 2-dimensional fiber array, linear fiber array, PM fiber devices, high-temperature optical components, and optical switch for coherent optical communication, sensing, biophotonics, and quantum communication. Multicore Fiber Fanout...

Wednesday, November 10, 2021

Quantity : 25,000 pie - Price : 5 - 150USD

Used for temporary endoscopic catheter of the biliary duct through the nasal passage by use of an indwelling catheter. Features of Single-use Nasal Biliary Drainage Catheter The drainage catheter provides the perfect combination of flexibility and stiffness. The drainage catheter...

Thursday, August 19, 2021

Quantity : 50,000-80, - Price : 8-15 USD

Fiber Optic Pigtail is a fiber optic cable capped at either end with connectors that allow fiber optic pigtail cable to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. The fiber pigtail assembly's thick layer of protection is...

Thursday, August 19, 2021

Quantity : 50,000-80, - Price : 8-15 USD

FTTH fiber patch cord or pigtail, refers to the drop cable ends with a connector plug, used to achieve optical active connection, also be made into a single head pigtails, and Flexible Splice, Quick connect and other products combined application, Connector types are SC-PC(APC) and FC-PC(APC)...

Saturday, July 24, 2021

Shenzhen Copperled is one of professional fiber optic pigtail manufacturers . We provide Patch Cords, Modular Plugs, data cabling system, cable management solutions, sc fiber pigtail, fiber optic pigtail splicing and so on. Want to know more? Please contact us. Pigtail fibre optic...

Saturday, June 19, 2021

FBG Temperature Sensor measures the temperature by utilizing the inherent feature of heat sensitivity of FBG. All the capsulation is specially designed to make the measurement free from the influence of pressure, strain, etc. Features of FBG Temperature Sensor High precision High...