GALVANOMETER - 98 ads

Friday, September 02, 2022

VCM F1 adopts the traditional voice coil motor design scheme, linear motor structure is simple, high stability. Using high precision grating ruler as position feedback, position resolution accuracy is 25 bits. Digital encoder technology greatly improves positioning accuracy, in addition...

Friday, September 02, 2022

The single-axis galvo motor system contains a high-precision sensor and a motor part based on moving magnet technology. The motor rotor is optimized for excellent dynamic properties and response characteristics. In addition, the motor features high rigidity and low friction. Moreover...

Friday, September 02, 2022

Compared with the photoelectric analog galvanometer, the installation of the grating requires a larger space, so the encoder part at the bottom of the grating digital galvanometer is higher than that of the photoelectric analog galvanometer. The grating digital galvanometer is more...

Friday, September 02, 2022

Hansscanner digital driver board can drive the full range of Han's Scanner photoelectric galvanometer motor and grating galvanometer motor, one driver board can drive two galvanometer motors at the same time. Support a variety of digital communication protocols; supports state output...

Friday, September 02, 2022

Han's galvo scanning system analog galvo driver board is designed for the full series of Han's Scanner photoelectric galvanometer motor, using the traditional PID closed-loop control mode, stable and reliable performance; with a variety of different configurations, support analog...

Thursday, August 18, 2022

The F-theta scanning lenses are commonly used in laser scanning systems that employ two-axis galvanometers to scan a specified area but cannot tolerate the angle at the image plane. By introducing a specified amount of barrel distortion in a scanning lens, thetelecentric f theta lens...

Saturday, July 09, 2022

5-axis Laser Micromachining System The ordinary precession drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining...

Saturday, July 09, 2022

The ordinary laser drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining system can also process the inverted cone hole...

Saturday, July 09, 2022

The four-axis linkage system is mainly composed of XY galvanometers, XY motion platform, platform driver, GMC control card and general marking software. It has the function of unlimited field of vision, synchronize the linear servo shaft and laser scanning galvanometer. When the high...

Saturday, July 09, 2022

The 3d dynamic focusing system mainly consists of XY galvo, dynamic focusing module, control card and upper computer software. By changing the position of the dynamic focusing mirror, its focus is still on the surface of the workpiece, so as to achieve the effect of the same diameter...

Saturday, July 09, 2022

The large-format 3D laser scanner head is free of the processing range limits of 2D field lenses, and can be flexibly selected 100x100mm-2000x2000mm. Package type three axis galvanometer, eliminate customer Z axis optical path debugging, easy installation and adjustment. According...

Saturday, July 09, 2022

Excellent driver board and galvanometer matching to achieve superior speed performance, reduce the first stroke of a character and corner burning phenomenon, strict mirror quality, ensure the requirements of mirror flatness and damage threshold. The galvo scan head produced by Han's...

Saturday, July 09, 2022

Han's Scanner focuses on scanning galvanometer system solutions. Our products include Ultragalvo photoelectric scanning galvanometer, Extragalvo grating scanning galvanometer, 3D scanning galvanometer, etc., focusing on galvanometer and motion control system solutions, existing four-axis...

Friday, April 08, 2022

GMC control card supports XY2-100, SPI and other galvanometer communication protocols, Ethernet communication, easy to expand the multi-control card synchronization control. High precision tri-axial correction algorithm ensures large area machining accuracy. Skywriting guarantees...

Friday, April 08, 2022

Common Fθ lens is a series of general lens used in laser fields. The common F-theta lens has developed into the 3th generation product after experiencing continuous improvement of Optical Component Center. The materials of the 3th generation product all belong to world-class domestic...

Friday, April 08, 2022

GMC is a galvanometer motion control card independently developed by Shenzhen Han's Scanner S&T Co., LTD. GMC galvo control card embedded software architecture, powerful performance, rich integration functions. Flexible laser control interface, support a variety of common laser control...

Friday, April 08, 2022

The 2.5D&3D system has the function of conventional 2D galvanometer, and a zoom module is added on the basis of the conventional galvanometer, which solves the problem that the traditional laser scanning galvanometer can only realize plane scanning and small range scanning, and...

Friday, April 08, 2022

High power galvo laser welding system is independently developed by Han's Scanner. The system after fully validated, with carefully designed double wind cooling water circulation system and excellent whole sealing, strict selection and testing of optical element, the assembly process...

Friday, April 08, 2022

The traditional Z-axis focusing module adopts voice coil motor or galvanometer structure, which has high load quality, slow response time and low dynamic performance. VCM Z-axis focusing module breaks through the traditional perspective optical path design scheme and greatly improves...

Friday, April 08, 2022

VCM G2 adopts full digital galvanometer driver, digital driver board of basic FPGA, stable performance, not easy to be disturbed, flexible to use, easy to debug. Modular design, easy to assemble. According to customer requirements, we can choose lenses with different aperture, high...

Thursday, August 19, 2021

The F-theta scanning lenses are commonly used in laser scanning systems that employ two-axis galvanometers to scan a specified area but cannot tolerate the angle at the image plane. By introducing a specified amount of barrel distortion in a scanning lens, the f theta scan lens becomes...

Friday, May 29, 2020

Quantity : 1pcs - Price : 40-200usd

The f theta scan lens are commonly used in laser scanning systems that employ two-axis galvanometers to scan a specified area but cannot tolerate the angle at the image plane. By introducing a specified amount of barrel distortion in a scanning lens, the F-Theta scanning lens becomes...

Sunday, March 31, 2019

The scanning mirror is light weight rectangular mirrors that used for high speed two-axis laser scanning system. The dimensions for each mirror have been calculated accordingly with the laser beam size. The mirror has high reflectivity of 99.5% or above. The scanning mirror usually...

Wednesday, December 13, 2017

Quantity : 1 set - Price : 4100usd

CNC laser marking machine / fiber laser marking machine price JPF20W for jewelry metal auto parts watches camera Parameter of fiber laser marking machine: NO Model JPF-20W 1 Laser power Fiber 20W 2 Working area 110*110mm 3 Laser Wavelength 1064nm 4 Response time 0...

Saturday, July 29, 2017

Quantity : 1pcs - Price : 2000~4000USD

Fiber laser marking machine is our company using the newest generation of laser marking system in the world's most advanced laser technology. Using fiber laser output laser, and then by high-speed scanning galvanometer system to achieve marking function. Fiber laser marking machine...

Friday, August 12, 2016

- Products application - The main products of FEELTEK includes 3 axis systems in C serial and F serial,wide field laser marking system , 3D surface &relief engraving system, laser pattern marking on moving walk piece based on visual position system, laser manufacturer by adding...

Sunday, July 05, 2015

MF10-E economic type fiber laser marking machine MF10-E dazu-yueming laser Polytron Technologies Inc (hereinafter referred to as the Han's Yueming) a new generation of economic type optical fiber laser launched marking machine. The marking machine based on the domestic market, configuration...

Sunday, July 05, 2015

DDB100 Treble Axes Dynamic Focusing Marking Machine Features 1. Fully enclosed optic system doesn't need adjustment and is maintenance-free. ymhqy2015 2. Original imported RF laser enjoys high power and good beam quality, stable power output and long lifetime. 3. Three-axis laser...

Sunday, July 05, 2015

DDB150 Treble Axes Dynamic Focusing Marking Machine Technical indicators: Laser power 60w/100w/150w Wavelength 1064nm Work area 400mm*400mm 500mm*500mm 600mm*600mm Supply voltage AC220V±10% Speed 7000mm/s Cooling method water Weight depend on configuration...

Sunday, July 05, 2015

MUV5-B-A UV Laser Marker MUV5-B-A UV laser marker adopts superior performance imported ultraviolet laser generator and digital high-speed scanning galvanometer, reliable quality; high quality laser beam, extremely small focused spot, which can realize ultra-fine laser marking; it's...