Analog Galvo Driver
Han's galvo scanning system analog galvo driver board is designed for the full series of Han's Scanner photoelectric galvanometer motor, using the traditional PID closed-loop control mode, stable and reliable performance; with a variety of different configurations, support analog and digital signal input, a variety of different power amplifier devices can drive mirrors with different loads from 3mm-50mm to achieve optimal dynamic performance, to meet the speed and accuracy requirements of various high-end applications.
Key Features Of Analog Galvo Driver
3-in-1 analog driver board
Integrate DA card and analog driver board, compact size
TDA8950 D class work output, low heat
First generation galvo driver
More than 10 years in the market, stable performance
A driver board drives a galvanometer
LM3886 AB dual-power amplifier, maximum 68W+68W power output, strong driving capability
Second generation analog driver board
TDA8950 type D power amplifier output, low heat
A driver board drives a galvanometer, driving capacity is strong
TDA8950 power amplifier, maximum 150W+150W power output, strong driving ability
Improved speed performance by more than 50% compared to the first generation analog driver board.
Specifications Of Analog Galvo Driver
Analog Galvo Driver Electric Parameter
|
Power Supply Requirements |
+/-15 to +/-28 VDC Configurations Available |
|
Maximum Drive Current Limit |
10 AMPS Peak |
|
5 AMPS Rms (Power Supply And Load Dependent) |
|
|
Operating Temperature Range |
0～50℃ |
Analog Galvo Driver Interface Definition
Connector Definition
|
Description |
J2 (10pin) Of Driver ST16xx |
|
GND |
1 |
|
GND |
2 |
|
GND |
3 |
|
GND |
4 |
|
POS1 |
5 |
|
MOTOR+ |
6 |
|
MOTOR- |
7 |
|
GND |
8 |
|
LED+ |
9 |
|
POS2 |
10 |
|
Description |
J1 (2pin) Of Driver ST16xx |
|
- |
1 |
|
+ |
2 |
|
Description |
J3 (4pin) Of Driver ST16xx |
|
-15V |
3 |
|
GND |
2 |
|
+15V |
4 |
|
NC |
1 |
|
Description |
J4 (10pin) Of Driver ST16xx |
|
NC |
1 |
|
POS_FB |
2 |
|
GND |
3 |
|
CMD_ERR |
4 |
|
V_CRT |
5 |
|
V_LED |
6 |
|
NC |
7 |
|
NC |
8 |
1. Electronic Parameters
|
Power Supply Requirements |
+/-15 to +/-28 VDC Configurations Available |
|
Maximum Drive Current Limit |
10 AMPS Peak |
|
5 AMPS Rms (Power Supply And Load Dependent) |
|
|
Operating Temperature Range |
0～50℃ |
Connector Definition
|
Description |
J2 (10pin) Of Driver Board ST16XX |
Remark |
|
GND |
1 |
Power Ground |
|
GND |
2 |
Power Ground |
|
GND |
3 |
Power Ground |
|
GND |
4 |
Power Ground |
|
POS1 |
5 |
Photocell Position Feedback Signal 1 |
|
MOTOR+ |
6 |
Motor Signal + |
|
MOTOR- |
7 |
Motor Signal - |
|
GND |
8 |
Power Ground |
|
LED+ |
9 |
LED Positive Terminal |
|
POS2 |
10 |
Photocell Position Feedback Signal 2 |
J1 Analog signal control port, communication through serial port
|
Description |
J1 (2pin) Of Driver Board ST16XX |
Remark |
|
- |
1 |
Analog Negative Signal Input (Pulse Signal) |
|
+ |
2 |
Analog Positive Signal Input (Pulse Signal) |
|
Description |
J3 (4pin) Of Driver ST16xx |
Remark |
|
-15V |
3 |
Negative Of Power Supply (Current 3A) |
|
GND |
2 |
Power Ground |
|
+15V |
4 |
Power Supply Positive Electrode (Current 3A) |
|
NC |
1 |
Suspend In Midair |
|
Description |
J4 (10pin) Of Driver Board ST16XX |
Remark |
|
NC |
1 |
Suspend In Midair |
|
POS_FB |
2 |
Motor Position Feedback Signal |
|
GND |
3 |
Power Ground |
|
CMD_ERR |
4 |
Command Error |
|
V_CRT |
5 |
Motor Current Sampling Signal |
|
V_LED |
6 |
Motor LED Voltage |
|
NC |
7 |
Suspend In Midair |
|
NC |
8 |
Suspend In Midair |
Hans scanner independently develops and produces a series of laser scanning heads (7mm, 10mm, 14mm, 20mm, 30mm, 50mm), voice coil motor and galvanometer system based on motion control technology, including 3D large area dynamic focusing system, high power galvanometer welding system, 5-axes drilling galvanometer, 4-axes platform linkage galvanometer, polygon scanning galvanometer, medical aesthetic fractional galvanometer, and weld tracking detection system. Serialized solutions have been successfully applied in mobile phone 3C industry, food packaging, tobacco industry,medical technology and other fields.
Contact : canner hanss, 0755 23041055
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Analog Galvo Driver Search in a category : B2B Services Search in a category : galvo, analog, driver |
532500 Equipment goodsReport abuse
Wednesday, June 04, 2014
.Capacity: 5kg .Graduation: 1g .Weight Mode: g/Kg/Ib/oz .High precision strain gauge technology .Dimension of the scale: 217x152x16.5mm .Dimensions of LCD Display viewing area: 49x22mm .Power: 1x3V CR2032 lithium battery (included) .Tare function .N.w(kg): 0.45KGS .G.w(kg): 0.5KGS Qty/20”...
Jerray Electric Appliance Co.,Limited
- 532500 - Kinglong square
- +85 2 23 69 69 00
529000 Equipment goodsReport abuse
Saturday, July 19, 2014
Our Multi-Color LED Rope Light consist of red, green, blue and yellow LED lights, joining together to form a colorful and breathtaking rope light. Our manufacturer utilizes sophisticated electro-optical designs to control the blend and diffusion of the light. This technology allows...
Real Green lighting Company
- Bonny Chan
- 529000 - Jiangmen City
- +15 6 02 20 39 93
11415 Equipment goodsReport abuse
Thursday, December 12, 2024
Quantity : 1 - Price : 180 000 EURO
VTL DKZ 4000, YOM - 1962. The machine is in excellent condition. Fully complete. Price - 180 000 Euro FCA Russia. Technical Data of Niles DKZ 4000: Faceplate diameter: 3500mm; Max. workpiece diameter(without side head): 4000mm; Max. workpiece diameter(with side head): 3750mm; Max...
AS LETORO GRUPP
- svtolkachova
- 11415 - Tallinn
- +375 296 645468
