PART - 28828 ads

Wednesday, October 11, 2023

Price : 4-10000USD

Under the effect of the WOB and the twist of the drill string, the teeth of the tci drill bit are crushed and eaten into the rock, and at the same time there is a corresponding sliding to shear the rock. When it rolls at the bottom of the well, the teeth on it will impact and press...

Wednesday, October 11, 2023

Price : 4-10000USD

The drill body of the Steel PDC Bit is made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite piece on the tungsten carbide material tooth post, and then the cutting teeth are inlaid on the drill body, and the diameter-preserving...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

Glass Filled PTFE Gaskets PTFE filled products by PTFE resin filler, after mixing, pressing and sintering after secondary processing. This product not only maintains the original characteristics of pure PTFE plastic, but also improves the hardness, creep resistance, abrasion resistance...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

PTFE O Ring PTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong corrosion strong chemical fluids and a variety of solvents, it can also seal a variety of gases, to adapt to dry friction occasions...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection and other aspects. Because PTFE molded rod has good high temperature resistance and corrosion resistance, it can improve the reliability...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

The process is to make corrugated PTFE tube at a certain speed through a temperature of 270℃ ~ 280℃ continuous forward rotation mold. It has all the excellent performance of PTFE but also has the characteristics of flexural, mainly used for strong corrosion resistance and high temperature...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presintered disperse resin by plunger. PTFE is commonly known as the king of plastics. It has many excellent features. PTFE molded parts have corrosive medium fluid piping...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

Self Adhesive PTFE Sheet PTFE surface itself is not adhesive, such as want to bond and other substances must need one side and two sides after Nana chemical treatment, and rubber, metal, and other substances bond, in special use, make up for the non-adhesive performance of polytetrafluoroethyle...

Tuesday, October 10, 2023

The main part of the wooden frame dry pet disposal table is made of wood, and the table surface is made of marble. It is necessary for hospitals to use conveniently and cleanly. The Wood Frame Veterinary Wet Disposal Table is a specialized table designed for the proper disposal of...

Tuesday, October 10, 2023

Do you want to move some components? Robotphoenix offers high-qualitied material handling robots, which are equipped with vision system and are capable of high-speed transfer in well-optimized robotic material handling systems. A material handling robot can participate in processes...

Tuesday, October 10, 2023

Hongjiali is a professional cash payment kiosk factory andcash payment kiosk supplier. Cash payment kiosk is a type of self-service touch screen cash accepting kiosk that is able to receive a bill payment in exchange for a service or good. Inaddition to accepting cash payments, cash...

Tuesday, October 10, 2023

CUSTOM ATM MACHINE FOR SALE MANUFACTURER HJL is one of the top custom automated teller machine manufacturers , we havetypes of automated teller machine for sale. Buy atm machines from China factory at competitive wholesale prices. Custom atm machine has a very long history which it's...

Monday, October 09, 2023

This blue plain backpack is nice for promotional seasons, affordable and accessible to a wide range of people with different budgets. It has a very simple constructions with one main compartment and one flat front pocket. Inside of the main compartment, it equipped with one laptop compartment...

Monday, October 09, 2023

Environmental protection bagasse with special design GREENWEIMO produce with advanced technology and can customize the tableware to meet the application of different scenarios. The designer's inspiration makes the bowl no longer round, but may have more shapes, such as square. This...

Monday, October 09, 2023

GREENWEIMO compostable cutlery bulk like forks and spoons are made of sugarcane bagasse. Their use function is almost the same as that of stainless steel. Biodegradable knives can be used to cut apples and steak. Biodegradable forks bulk and spoons are also very convenient to use...

Monday, October 09, 2023

Features of DGWHB Electric Scooter Motor Almost no noise, it provides almost instant torque even without any noise. Low maintenance, the electric motor does not need to spend time or money on maintenance. Compact, the 350w scooter motor is installed in the electric scooter, which...

Monday, October 09, 2023

Ebike Mid Motor Mid motor is mounted on the frame where the pedal crank is. Mid motor are far more complex than hub motors, which also cost too much.  Ebike Rear Motor All the weight is on the motor, which provides maximum traction in different conditions. Noise levels are lower on the rear hub...

Monday, October 09, 2023

All the weight is on the motor, which provides maximum traction in different conditions. Noise levels are lower on the rear hub, because of the extra weight on the wheel vibrations from other parts. Many riders prefer rear motors which makes the bicycle have good looking. Rear motor...

Monday, October 09, 2023

DEED horizontal machining center with pallet changer mainly used for the processing of box, shell, and special-shaped parts in automobiles, motorcycles, especially auto engine shell, reducer shell, mold, and general machinery industries. Our horizontal machining center for sale is...

Monday, October 09, 2023

The X/Y/Z servo axis adopts the servo motor direct connected precision planetary reducer to drive the large-diameter, high-precision double nut preloaded ball screw. The planer type horizontal boring and milling machine tool guide rail adopts the roller linear rolling guide rail pair...

Monday, October 09, 2023

The CNC horizontal turning lathe center bed adopts "mineral casting" material and technology of Germany, which guarantees DEED CNC horizontal turning center with better performance on accuracy maintenance and stability for a longer time. DEED model HP800-WC cnc turning machine for...

Monday, October 09, 2023

HBC Series is our CNC horizontal boring and milling machine. According to the different sizes, we have HBC1116 CNC boring machine and HBC1316 CNC horizontal boring machine. We introduce German mineral casting material for our horizontal boring and milling center base and column. CNC...

Monday, October 09, 2023

Vt series CNC tapping machine center is a vertical drilling center independently designed and developed by our company. The CNC drilling and tapping machine center has the structural characteristics of high speed, high precision, high rigidity, and high reliability. CNC drill tap...

Monday, October 09, 2023

5 axis vertical machining center is a high-end 5-axis linkage machine tool that developed after taking in the German advanced technology. VMC 5 axis machine features high efficiency, high accuracy, high flexibility. Five axis VMC machine can continuously finish drilling, boring, reaming...

Monday, October 09, 2023

600*600mm large cross-section ram of 5 Axis CNC gantry type machining center to ensure that even when the ram is overhung, the gantry CNC 5 axis gantry type machining center maintains strong cutting rigidity. X/Y axes are each equipped with 4 roller-type linear guides, equipped with...

Monday, October 09, 2023

What Is the Difference between Insert Molding and Overmolding Plastic injection molding is one of the most widely used processes for manufacturing high-quality and extremely precise parts. The process is known for its multiple advantages. Consequently, a wide range of industries have...

Monday, October 09, 2023

Types Of Plastic Injection Mold Polishing Introduction to theplastic injection mold polishing These days, industrial products are developing in the direction of product high quality as well as product diversification, in this way mold quality is going to have an influence on product...

Monday, October 09, 2023

Two shot moulding, also calleddouble shot injection molding, double shot moulding , multi shot injection molding or 2k injection moulding is one category of injection molding using two different thermoplastic materials to produce injection molded parts in two colors or two components...

Monday, October 09, 2023

Over molding of keyplast is a special plastic molding process. Overmolding custom injection molding is similar to the two-color molding or two-shot molding process. Over moulding can make the surface of the product full of softness and increase product functionality and added value...

Monday, October 09, 2023

Keyplast has efficient team with many years' experience of injection moulding, while medical industry is one of our mainly focused industries. With our deep insight into the medical injection moulding industry, MacroMedics approaches to Keyplast for injection moulding service in the...