Construction goods

Ceramic Membrane

Ceramic membranes are available for microfiltration, ultrafiltration and nanofiltration as single-channel or multiple-channel elements with channel diameters between 2 and 16mm.

Their main characteristics of ceramic membrane technology

  • Consistent pore size;
  • Very narrow mean pore-size distribution;
  • Long and reliable lifetime;
  • High permeate flux;
  • Greater void area per unit area of filtration surface;
  • High stability to organic media;
  • High-pressure resistance, high-temperature resistance;
  • Rigid with no creep or deformation;
  • Stable over a wide pH range;
  • Membranes bonded to substrate by strong ceramic bonds;
  • Corrosion & abrasion resistant;
  • Insensitive to bacterial action;
  • Can be repeatedly sterilized by steam or chemicals;
  • Ability to backwashed;
  • The possibility of regeneration after fouling;
  • Can process highly viscous fluids;

The principle of ceramic membrane The principle of the filtration is based on two opposing effects: on the one hand, the particles are transported by the filtration flux to the China membrane where they cause an increase in concentration; on the other hand, concentration differences are again reduced by the turbulence of the cross-flow and by Brownian motion of the particles.

During filtration by means of ceramic membranes made by JIUWU ceramic membrane manufacturers the medium to be filtered flows through the channels of the membrane support. All particles whose size exceeds the pore radius of the membrane are retained. The particles /molecules build up in the concentrate. The filtrate permeates through the pores and depending on the procedure is subjected to subsequent process stages. This filtering method is also called “cross-flow filtration” or “dynamic filtration”. Cross-flow management can achieve stable fluxes. Still, the cleaning of cross-flow installations needs to be applied from time to time. Cleaning is performed by means of backward flushing or chemical cleaning.

Location : No. 9 Yuansi Road, Pukou, Nanjing, Jiangsu, China , 211808 nanjing,
Contact : Ding Claire, 025 58109595

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Ceramic Membrane

Search in a category : Construction goods
Search in a category :
membrane, ceramic
photo not available

Monday, September 13, 2010

STM s.r.l. Eurolock series include all kind of high quality Made in Italy hinges. The "TM Made in Italy" brand made us famous worldwide and these are the hinges we successfully produce since many years. These slide-on hinges can be provided with all the angles and cranking in order...

STM s.r.l.

Lithuania Raw materials
photo not available

Monday, March 30, 2009

Quantity : 1800 kg - Price : 75 EUR (Negotiable)

We are searching for the buyers/suppliers to sell oak extract delivered from Russia, produced from the Caucasian oak tree, aged not less than 80-120 years, grown up in high from 700-1200 m in mountains, in ecologically clean areas of North Caucasus. There is the certificate of conformity...

photo not available

Tuesday, July 10, 2007

Quantity : 2000 Tons

we sell diferents grains of high cuality : Quinoa, Cañahua ,Amaranth, Maca and his derivates like pops, flakes, fluor.Location : Urbanizacion"Los Pinos" Zona Norte, none Oruro, Contact : Jean-marie Galliath, +59 1 25 28 51 88

SONAPTO S.R.L.

  • sonapto
  • none - Oruro
  • +59 1 25 28 51 88
  • +59 1 70 42 43 19