STRONG - 46270 ads

Friday, May 31, 2019

A sample vials cap (or gasket), made of paper, rubber, corkwood, metal, glass fiber or plastic polymer, is placed between the two planes to strengthen the seal and prevent fluid leakage. Machined surfaces cannot be perfect so use caps to fill in irregularities. Asbestos may be present...

Thursday, May 30, 2019

NHG60 Single Angle Intelligent Gloss Meter NHG60 gloss meter supplier features with 60° angle, manufactured according to ISO2813 and GB/T 9754. It is also compatible with the standards of ASTM D523, ASTM D2457. NHG60 conforms to JJG696 first class gloss meter working requirement,...

Thursday, May 30, 2019

- Spectrophotometer Color Tester XZB-C280 - - Spectral Colorimeter XZB-C280 - Spectral colorimeter is the colorimeter which adopts the theory of spectrophotometer. It is widely used for plastic, printing, paint, ink, textile, dyeing and other industries for color management. It...

Thursday, May 30, 2019

- Spectrophotometer Colorimeter XZB-C580 - - Spectrophotometer XZB-C580 - - - - 1. Brief Introduction - - 1).Our device adopts internationally agreed observe condition D/8 - (Diffused lighting, 8 degrees observe angle) and SCI(specular reflection included)/SCE(specular reflection excluded)...

Thursday, May 30, 2019

- Benchtop Spectrophotometer Colorimeter XZB-CS800​ - - Tabletop Spectrophotometer XZB-CS800 - XZB-CS800 is a highly performance spectrophotometer with top-port test caliber. The instrument adopts the geometric conditions of D/8 lighting and observation of CIE recommendations,...

Thursday, May 30, 2019

Quantity : 1 - Price : 1,00 €

Solid-phase extraction (SPE) is a useful method of sample preparation. By sorting onto a disposable solid-phase cartridge, it can concentrate and purify analytes from solution. But sometimes, the results are unsatisfied with the poor and non-repeatable sample recovery. To avoid it...

Thursday, May 30, 2019

Overview The HPL panel (High-pressure laminate) 4 mm thick is a solid compound consisting of more than 40 layers of paper impregnated with melamine and phenolic resins. The sheet of HPL, measuring 1300x3050 mm, has a transparent finishing layer on both external sides that protects...

Thursday, May 30, 2019

Overview Honeycomb core introduction: Aluminum hexagonal honeycomb, with low density, 1/5 of the same thickness of the same board, 1/6 of the glass and 1/7 of the aluminum, can greatly reduce the construction load and cost. Because the middle interlayer contains a lot of air, so it...

Thursday, May 30, 2019

The clean room windows produced by us consists of two categories: single glass window and double glass window. The single glass window owns the features of high transparency, low price, simple structure and easy installation. The double glass window is characterized by insulation...

Thursday, May 30, 2019

Overview Cleanroom ceiling grid system is not a single product but a combination of a system, a combination of several components into a ceiling system. The ceiling grid supports FFU (Fan, Filter Unit) ceiling panel, fire sprinkler hose sprinklers, lamps and etc. Some factories have...

Thursday, May 30, 2019

Overview Our(clean room doors and windows factory) steel door products are made of steel frame and PCGI door panels with very good flatness and fire resistance. Most electronics industry factories use this type of door, they can also be used in indoor compartment doors of other factories...

Wednesday, May 29, 2019

Quantity : 1 - Price : 1,00 €

The installation method of the extraction thimble is divided into vertical lifting, oblique mounting at a specific angle, flange mounting, and the like. The automatic cleaning method commonly used in the extraction thimble is high-pressure gas pulse back-blowing and mechanical vibration...

Wednesday, May 29, 2019

1. When installing the intake tube and the drain tube, insert the bottle-top dispenser tubes straight into the valves, tighten the nut properly to protect the tubes. 2. Make sure bottle-top dispenser that the intake and drain valves and all valves are properly installed and tightened...

Wednesday, May 29, 2019

Name Neck Massager Battery 3.7V 2000mAh Temperature 5--40℃ Power 6W NW 900g Function 1. USB charge, Your portable massage master 2. Patent design, 180-degree free opening 3. U-shaped elastic design Nicer fit for better massage 4. Cordless with smart outstanding 5. Infrared...

Wednesday, May 29, 2019

OceanChlor Electro Chlorination Package is designed based on seawater electro chlorination system for marine application that uses seawater for cooling has the potential for the formation of bio fouling from the various organisms lurching in the oceans. The purpose of hypochlorite...

Wednesday, May 29, 2019

OceanChlor – Hazardous area Electrochlorination is designed based on OceanChlor series hypo chlorination system for hazardous area marine application that uses seawater for cooling has the potential for the formation of bio fouling from the various organisms lurching in the oceans...

Wednesday, May 29, 2019

CTE & PPE Titanium Chlorination Electrolyzer Design & Fabrication Titanium chlorination electrolyzer nodes were made by insert substrate coated with mixed precious metal oxide catalysts and platinizing, a very large variety of anodes of applications in almost every possible...

Wednesday, May 29, 2019

Why We need Electrochlorination Electro chlorination sodium hypochlorite is a type of industry-standard oxidizing agent, which can be applied in various sorts of applications, marine bio fouling control, potable water disinfection and etc. The Electrochlorination system designed by...

Wednesday, May 29, 2019

The CTE chloropac system is typically used for small to medium production capacities, while PPE system is typically used for larger production capacities of sodium hypochlorite. The Advantages for Applying Concentric Tubular Electrodes (CTE) Electrolyzer as Following: 1. Self-Cleaning...

Tuesday, May 28, 2019

- - PP woven bags are widely used in the packaging industry because of their low price and good tear resistance. However, it is not moisture-proof, and it has the disadvantage of being easy to leak powdery substances. Kraft paper has the characteristics of non-toxic, easy to print...

Tuesday, May 28, 2019

- Rice Bags - Rice bags are divided into vacuum packages and non-vacuum packages. Most part of non vacuum rice bags are made of polypropylene material, either of nature pp woven fabric or with BOPP film Laminated. Mornpackaging offers both pp woven bags and BOPP bags for rice packing...

Tuesday, May 28, 2019

- Product description - - Forged Rings Features - Forming type : forging Rating: ANSI150LBS~2500LBS, DIN PN6~PN160 JIS 5K~30K, HG PN0.25~PN25 PN2.0~PN42.0 Size : 15mm—5000mm - Forged Rings Standard - ASME/ANSI: ASME B16.5, ASME B16.48, ASME B16.47 , API590 GB: GB/T9112~GB/9124-2000...

Tuesday, May 28, 2019

- Product description - Slip On Flanges Features Forming: forged - Slip On Flanges Materials - Stainless Steel: OCr18Ni9, 0Cr18Ni9Ti, 1Cr18Ni9Ti, 0Cr18Ni12Mo2Ti, 00Cr19Ni10, 00Cr17Ni14Mo2, ASTM A182-F304, F304L, F304H, F316, F316L, F321, F321H, F347H Super Stainless Steel: ASTM A182-904L...

Tuesday, May 28, 2019

- Product description - - Loose Flanges Features - Forming: forged - Loose Flanges Materials - Stainless Steel： OCr18Ni9, 0Cr18Ni9Ti, 1Cr18Ni9Ti, 0Cr18Ni12Mo2Ti, 00Cr19Ni10, 00Cr17Ni14Mo2, ASTM A182-F304, F304L, F304H, F316, F316L, F321, F321H, F347H Super Stainless Steel: ASTM A182-904L...

Tuesday, May 28, 2019

- Product description - - Reducing Flanges Features - Forming: forged - Reducing Flanges Materials - Stainless Steel： OCr18Ni9, 0Cr18Ni9Ti, 1Cr18Ni9Ti, 0Cr18Ni12Mo2Ti, 00Cr19Ni10, 00Cr17Ni14Mo2, ASTM A182-F304, F304L, F304H, F316, F316L, F321, F321H, F347H Super Stainless Steel...

Monday, May 27, 2019

SMD color consistency is good. The dispensing process adopts centrifugal technology to enhance the uniformity of the light spot and good heat dissipation. - Product Advantages of RGB 3030 RGB LED - - All colors included customized wavelength. - Red light: 620-630NM (R620), Green light...

Sunday, May 26, 2019

- < strong>ASTM A515 GR 70/ ASME SA515 - - ASTM A515/A515M Standard Specification For Pressure Vessel Plates, Carbon Steel, For Intermediate-And Higher-Temperature Service - ASTM A515/A515M specification covers carbon-silicon steel plates primarily for intermediate- and higher...

Sunday, May 26, 2019

- ASTM A514 / ASME SA514 - ASTM A514/A514M Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding ASTM A514/A514M standard specification covers high-yield, quenched, and tempered alloy steel plates for use in welded parts and...

Sunday, May 26, 2019

Product name : Basket cello bags Item : 06105 Basket cello bags of square bottom (non shrink) Large polypropylene (cello) bags with a square bottom. Makes you DIY basket packaging more perfect! OEM all kinds of sizes. 7 X 15" , 16 X 19" , 10 X 20" , 12 X 20" , 18"x20" , 18 X24"...

Friday, May 24, 2019

Quantity : 199 - Price : 1 340,00 €

Parameters: 1) Semiconductor solid cold light source, combined with unique optical system, provide super light power intensity output and high-quality light spot,can achieve the best treatment effect 2) High-efficiency cooling system, perfect the functional balance,extend the working...