FILLED - 1122 ads

Thursday, August 24, 2023

Industrial High Precision Pressure Sensor Transducers Pressure Type: Gauge / Absolute Pressure Range: 0~7MPa / 0~4MPa Pressure Accuracy: 0.25%FSO / 0.1% FSO Output: 4~20ma/ 0~5V/ 0~10V RS485 High Accuracy Pressure Sensor LFT2010 High accuracy differential pressure transducer applies...

Thursday, August 24, 2023

Diaphragm Pressure Transmitter Pressure Type: Guage/ Absolute Diffusion silicon core + 316L thin diaphragm Pressure Accuracy：0.25%FSO / 0.5% FSO Electrical Connection: Parkard / Big Hessman / M12 General Type Flat Film Pressure Sensor LFT2700 Clamp Type Sanitary Flat Film Pressure...

Thursday, August 24, 2023

Wax type thermostat is the most widely used in combustion engines, and SDZ possesses and masters matured skills of wax thermostat's development and production. The wax pellet thermostat in the copper expands when it heats up and contracts when it cools. Characteristics of Wax Type...

Thursday, August 24, 2023

Quantity : 1000kg - Price : 400-800CNY

PEEK-CA series reinforced plastics filled with carbon fiber, high elastic modulus, mechanical strength, creep resistance, wear resistance and dynamic fatigue resistance. Types of Grade CA Carbon Fibre PEEK ZYPEEK Supplier CA Series-770CA30 PEEK Carbon Fiber Reinforcement CA Series-550CA30...

Thursday, August 24, 2023

Quantity : 1000kg - Price : 400-800CNY

CA Series-770CA30 carbon fiber filled PEEK reinforcement is widely used in automobile and aviation fields. It is widely used in automobile fuel pump and gearbox. It can help equipment reduce weight, reduce noise and increase the service life of wear-resistant parts, reduce or even...

Thursday, August 24, 2023

Quantity : Carton - Price : 400-800CNY

PEEK polymer raw material is a kind of semicrystalline aromatic polvmer and its main chain of macromole is consist of arvl. ketone, and ether. PEEK plastic raw material has the properties of heat resistance, chemical stability as thermosetting plastics, and good processability as thermoplastics...

Wednesday, August 23, 2023

SLA printing is focused on the surface of a light cured material, which is solidified from point to line and line to surface. SLA printing of SLA 3d printing companies Proto Mold enables a wide selection of materials, extremely high feature resolution and high quality surface treatment...

Wednesday, August 23, 2023

Slewing Bearing Without Gear, SWBTEC slewing bearings without gear usually include ball contact type and crossed roller type. Dimension is from 80mm-2500mm, and the material is 50Mn&42CrMo4. A slewing bearing without gear is widely used on many machines too, like rotators, package...

Tuesday, August 22, 2023

Price : US$1.00

Introduction of car ignition coil Winding and potting are the key processes in the production of ignition coils. MAPMS has multiple automatic winding machines realize automatic winding of primary coil and secondary coil. Vacuum at 100pa for 2 minutes to ensure that the air in the...

Saturday, August 19, 2023

Bean bag chairs are soft and comfortable seating options filled with small polystyrene or PVC balls. They come in various sizes and designs, such as round or square shapes, to suit different ages and preferences. Bean bag wholesale can provide casual and relaxed seating indoors or outdoors...

Tuesday, August 08, 2023

Price : 2.8-3.2USD

Plastic molds are tools that are matched with plastic mold making machines in the plastic processing industry to give plastic products a complete configuration and precise dimensions. Due to the wide variety of plastics and processing methods, and the complex and simple structures...

Tuesday, August 08, 2023

Price : 2.8-3.2USD

What is plastic injection molding? Plastic Injection molding is a molding method that combines injection and molding. The advantages of plastic small scale injection molding method are fast production speed, high efficiency, operation can be automated, variety of colors, shapes can...

Tuesday, August 08, 2023

Price : 2.8-3.2USD

What materials are used in injection moulding? Materials used in injection moulding generally include abs molding, nylon injection molding, polycarbonate injection molding, PP injection molding, PVC injection molding, HDPE injection molding, and so on. Feel free to check out the injection...

Tuesday, August 08, 2023

Price : 2.8-3.2USD

Plastic Injection Molding Plastic Injection Molding Plastic injection moulding is a method of making plastic products. The molten plastic is injected into the mold by pressure, and then cooled and molded to obtain various plastic parts. There are mechanical injection molding machines...

Thursday, August 03, 2023

As one of the professional oil filled transformer manufacturers, our oil immersed power transformer is specially developed and designed based on the advanced technology abroad for rough mountainous topography and transportation difficulties to meet the requirement of China oil type...

Wednesday, August 02, 2023

X1-H4 pipeline periscope is mainly used for rapid detection and diagnosis of the internal conditions of industrial vessels or pipelines. Put the camera probe with its own searchlight light source into the pipe mouth or the inside of the industrial container through the operating lever...

Tuesday, August 01, 2023

Beverage wine protective packaging, you can choose to use shock-proof bubble film, in order to save all aspects of the cost.Shockproof bubble film before inflation is completely flat, just a number of A4 paper thickness, can be filled at the moment, this will save a lot of storage...

Tuesday, August 01, 2023

Birkom shock absorber wholesale is designed by an international team of Koman automotive shock absorber suppliers production and management strictly follow the TS16949 international standard with shock absorber OEM service. China shock absorber factory direct supply, our shock absorber...

Saturday, July 29, 2023

Brief introduction of rubber magnets(magnetic rubber): Rubber magnets sometimes called magnetic rubber. Magnetic rubber itself has no magnetism , the magnetism comes from filled magnetic powder. So the magnetic powder is obligate material for produce magnetic rubber. Magnetic additive...

Friday, July 28, 2023

The aluminum fins are embedded in a spiral groove about 0.25~0.5mm deep on the surface of the steel pipe, while the metal extruded from the spiral groove is rolled back to the fin root. The biggest advantage of this kind of g fin tube is that it has good thermal performance, the...

Thursday, July 27, 2023

Elevator guide rails are elevator components composed of steel elevator rails and connecting plates, which are divided into car guide rails and counterweight guide rails. Panda Elevator is one of professional elevator guide rail manufacturers, elevator guide rail suppliers. The elevator...

Thursday, July 27, 2023

Price : 1000-6000USD

Overseas factory licence application The following premises are generally considered to be factories all over the globe: Construction Any premises where building operations or any work of engineering construction are carried out. Manufacturing Any premises: Using an assembly-line...

Wednesday, July 26, 2023

The runner filling balance must be considered when designing the multi-cavity mold in order to ensure the best effect of filling balance, the multi cavity plastic mold will be multiple of 4 to design the mold generally, such as 4. 8. 16. 32. 64. 128 points, etc. ; Most of the multi-cavity...

Wednesday, July 26, 2023

Gas Assist Injection Molding Design Guide Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas assist molding; The product wall thickness of water-assisted...

Wednesday, July 26, 2023

Quantity : Per Order - Price : $0.1-$200

In the field of valves, cold expansion ball valve is a top-mounted ball valve with a thermal expansion and contraction compensation structure, including a valve body, a valve ball, a valve seat and a valve cover. This new OEM ball valve is characterized in that: the valve seat is...

Wednesday, July 26, 2023

Price : 1000-6000USD

The flat pack container house (Porta Cabin) is a modular building that can be moved and reused at will, which is all made of steel. The flat pack container building is an integral structure with a frame inside. The wall is made of color steel composite board and filled with EPS, rock wool...

Saturday, July 22, 2023

A baby food blender is designed to help the mother with making baby food faster and easier. It is very helpful for people who are always on the move because of tight schedules. You do not need to worry about your baby getting fewer nutrients from food from stores if you do the baby...

Saturday, July 22, 2023

This series of products adopt a positive bending design and built-in high-brightness LED chips, which can emit light of various colors and have excellent visual effects. With a variety of bendable neon light optional models, it is not only suitable for indoor use, but also outdoor...

Saturday, July 22, 2023

NX series nano aerosol generator is an ultra-fine atomization device specially used for ultrasonic atomization disinfection. Using high-frequency ultrasonic transducer and unique flow channels, it can produce very small atomized droplets with mean diameter of 0.5 microns. Because...

Saturday, July 22, 2023

Siansonic unique non-invasive ultrasonic air bubble detectors and ultrasonic air bubble sensors are widely used in the detection of air bubbles in liquid delivery for medical industry such as infusion pumps, dialysis machines and in vitro diagnostic instruments. Ultrasonic bubble...