LASER - 4832 ads

Saturday, October 29, 2022

- Grind supplies the whole range of and PCDN blanks for cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available can be 55mm. Our PCD blanks and PCDN blanks provide high wearing resistance ability and high finishing surface. Application of PCD Blanks Our...

Friday, October 28, 2022

With mechanical seal factory, Sealcon is able to design and manufacture a wide range of OEM mechanical seals. Our aim is to improve product quality and offer customized solutions to clients' needs, always seeking the best cost performance, with good reliability and high resistance...

Friday, October 28, 2022

Thermal security camera system is widely used in areas where security and monitoring are required for timely detection of abnomal situations in order to prevent further damage. Below are two typical type of cameras for thermal surveillance and the importance of thermal imager for...

Friday, October 28, 2022

Gas leakage camera is an instrumentation tool for infrared pipeline leak detection. Below are two of our featured gas leak camera. Optical Gas Imaging Cameras TI320+ ULIRVISION TI320+ is with cooled detector (QWIP, NETD<25mK) to detect gas leaks and pinpoint the gas leaks location accurately...

Friday, October 28, 2022

Cooled core and uncooled core are different in many aspects, including the descriptions below. TC320MW/TC640MW TC320MW|TC640MW are mid-wave cooled thermal imaging core with high-quality detectors which can be easily integrated into infrared systems that require extremely long distance...

Friday, October 28, 2022

Sepcification of Athermalized Lens Focal Length (mm) F Number Adapter Detector Field of View Rear Working Distance (mm) Interface Physical Dimension Working Temperature Coating Waterproof Rating Coating Athermalized Lens 9 1.0 640*480-17μm 72.8°*53.4° 4 M25*0.5...

Thursday, October 27, 2022

Packson is not totally the same as other medical plastic injection molding companies. Because we are an ISO-certified medical injection molding provider. Packson had got the certification of ISO 13485: 2018 and ISO 9001: 2008. We've been working with healthcare and medical molding...

Thursday, October 27, 2022

Price : 1-100USD

A fiber coupled collimator is a fiber optic passive device which is a precise alignment of a pigtail and a lens. It can transform diverging light into parallel beam of light or couple the collimating light into a single fiber. It is widely applied in single mode fiber collimator...

Thursday, October 27, 2022

Product characteristics 1. Silicone rubber materials: Epoxy encapsulation, Multi-Hardness 2. Cost-effective 3. Surface: texture, metallic colors 4. Silicone key height：15mm or more 5. Can be molded with conductive pills, assembled with polyester or metal dome arrays for electrical...

Tuesday, October 25, 2022

Price : 0.99-9.99$

Quick Details CNC Machining or Not: CNC Machining Type: Broaching, DRILLING, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Turning, Wire EDM, Rapid Prototyping Material Capabilities: Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals...

Tuesday, October 25, 2022

Price : 0.99-9.99$

Quick Details CNC Machining or Not: CNC Machining Type: Broaching, DRILLING, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Turning, Wire EDM, Rapid Prototyping Material Capabilities: Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals...

Tuesday, October 25, 2022

Price : 0.99-9.99$

Quick Details CNC Machining or Not: CNC Machining Type: Broaching, DRILLING, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Turning, Wire EDM, Rapid Prototyping Material Capabilities: Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals...

Tuesday, October 25, 2022

Quick Details CNC Machining or Not: CNC Machining Type: Broaching, DRILLING, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Turning, Wire EDM, Rapid Prototyping Material Capabilities: Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals...

Tuesday, October 25, 2022

Price : 0.99-9.99$

Quick Details CNC Machining or Not: CNC Machining Type: Broaching, DRILLING, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Turning, Wire EDM, Rapid Prototyping Material Capabilities: Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals...

Saturday, October 22, 2022

Price : 10-30USD

Nowadays, li ion battery types have become various. PLS Battery, as one of li ion battery suppliers, offers different types of lithium batteries with NCM or LiCoO2 materials, including lithium ion 18650, 26650 lithium ion battery, 32650 lithium ion battery, 18500 li ion battery, 14500...

Thursday, October 20, 2022

G12 large size silicon chip can improve the production efficiency from silicon chip to battery chip to module. At the same time, the production and operation costs can be reduced, especially for medium and large-scale distributed systems and ground power stations, which can effectively...

Thursday, October 20, 2022

Price : From 4$

GrenTech 100G QSFP28 PSM4 is a type of Four-Channel, Pluggable, Parallel, Fiber-Optic 100g optical transceivers for 100GEthernet Applications. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate...

Thursday, October 20, 2022

Price : From 4$

GrenTech 100G QSFP28 LR4 fiber is equipped with a built-in LAN-WDM laser and PIN array with cooler, which can complete 4-channel photoelectric signal conversion through MUX DEMUX. As a normal kind of 100G optical transceivers, the SFP LR4 optic transceiver can transmit up to 10km...

Thursday, October 20, 2022

It's a 1550nm 16 port fiber optic amplifier(EDFA) with 23dbm output power. All installation accessory such as AC or DC power supply, SNMP or switch can be included based on customer requirements. The body of the EDFA 16 port is made of cold-rolled steel to protect the inside electric...

Saturday, October 15, 2022

The table placemats and coaster is made of food grade Silicone, BPA Free, PVC Free, non-slip, flexible and durable, withstand temperature -40℃- 230℃, suitable for microwave, ovens, refrigerators, and dishwasher. And for this kind of silicone table placemats and coaster, logo can be...

Friday, October 14, 2022

Price : 10usd-100usd

DIAMOND STAINLESS STEEL WATCH WATERPROOF LEATHER STRAP This stainless steel diamond watch has a watch dial decorated by diamond. And there is another decoration, directional laser in the watch bezel. FEATURE OF DIAMOND STAINLESS STEEL WATCH WATERPROOF LEATHER STRAP This watch applied...

Wednesday, October 12, 2022

It is suitable for the positioning and welding of the welding seam at the outer corner formed by the double rib arc plate and the rib plate of the heavy truck brake shoe assembly. The equipment adopts a fully enclosed overall design, which has a beautiful appearance and is easy to maintain...

Wednesday, October 12, 2022

Double ended polishing machine using Inovance PLC (programmable logic controller) control system;The polishing wheel is made of hemp wheel material, and the upper, lower, front and rear are controlled by servo drive; uses two methods of duplex position vertical and horizontal for...

Wednesday, October 12, 2022

The equipment is a CNC milling machine developed and produced for the milling processing of the forklift brake base plate boss. The equipment can realize automatic rotation, avoid the milling cutter, and quickly stop and start the spindle. And can save 10 groups of programs to call at will...

Wednesday, October 12, 2022

The brake shoe welding machine is independently developed and produced by Xihe. At present, the medium frequency roll welding machine is used for single rib brake shoes, and the gas shielded welding machine is used for plug welding, fillet welding and reshaping of double rib brake...

Wednesday, October 12, 2022

The equipment is a grinding equipment for bonding or riveting the outer arc of the brake. The equipment is positioned by a 4-station divider, so that the rotation error of the station is less than 0.03mm. The equipment is equipped with a rough grinding station, a fine grinding station...

Wednesday, October 12, 2022

The automobile brake pad steel back spot laser welding machine adopts the intermediate frequency controller, which has high control precision, stable output current and saves power compared with the power frequency. The laser spot welder has the function of single/continuous spot welding...

Wednesday, October 12, 2022

Independent research and development and manufacture of forklift brake assembly line. The equipment adopts the leading two-stage bed plane conveying structure design, which improves the utilization rate of the flow channel to 100% (the upper and lower conveying methods of traditional...)

Wednesday, October 12, 2022

Types of Custom Patches for Clothes Sell lanyards with a choice of clips and accessories, including plastic, metal and retractable varieties. The lanyard is usually hung around the neck and comes in various styles, materials, and designs. They are usually purchased alongside our activity passes...

Monday, October 10, 2022

The coating thickness of benchtop ultrasonic spray coating system is controllable: typically from tens of nanometers to tens of microns. The ultrasonic spray coater could equipped with various ultrasonic nozzle options for different droplet sizes and spray widths. The Uniformity of...