ORIFICE - 163 ads

Thursday, August 06, 2020

Price : US $1 - 3,000 / Set

Air Valve Each of ZECO's single industrial air release valve and double orifice air discharge valve is a high-quality combination water air relief valve, suitable for various sewage and wastewater systems and operating conditions. ZECO's air release valve uses an irregular round stainless...

Saturday, May 16, 2020

Quantity : 100set - Price : 19500USD

Brief introduction: NSQ submersible centrifugal pumps feature a unique double-impeller structure, including a stirring impeller installed on the base, secondary to the main impeller. The stirring impeller will drive the precipitated sludge into a turbulent flow and then pump the fluid...

Thursday, February 20, 2020

WHAT IS NANOSOX? Made of special hi-tech inherent permanent fire resistant fabric materials, Nanosox fabric air dispersion system is a terminal air dispersion system that transfers and distributes air in the space, replacing traditional ductwork, air dampers, diffusers and insulation...

Wednesday, November 06, 2019

Quantity : 500square - Price : 25usd

With the rapid development of society, people's life is getting better and better. Many kinds of technology panels have been invented, and the wood grain aluminum composite panel is one of them. The wood grain aluminium composite panel is a kind of aluminum panel with wood grain on the surface...

Friday, September 27, 2019

As a Prominent Supplier and astm a182 f316L flanges Manufacturer in Mumbai we are responsible for high quality 316L Stainless Steel Flanges, 316l Stainless Steel Threaded Flanges, and ASTM A182 F316 Flange In India at reasonable cost. We provide a wide range of SA 182 f316l flange...

Thursday, July 04, 2019

Price : US $1 - 3,000 / Set

Basic information The double orifice air release valve is a pipeline will be matched equipment, apply to the temperature does not exceed 100 water, hot water pipe on the pipe from the air. Features 1. Body is provided with a shock-proof inner tube to protect the float 2. Lower...

Wednesday, June 05, 2019

The conventional membrane filter device comprises vacuum manifolds filtration system, joint flask, and the vacuum source. Conspicuously, the essential part is the filtration system, which consists of three glass filter holders with respective values and two handles placed on both sides...

Wednesday, May 22, 2019

Basic information This double orifice air release valve is a pipeline will be matched equipment, apply to the temperature does not exceed 100 water, hot water pipe on the pipe from the air. Features 1. Body is provided with a shock-proof inner tube to protect the float; 2. Lower water...

Friday, March 08, 2019

ASME B16.36 orifice flange are used together with orifice meters and in this way it becomes possible to measure the flow rates of gas, oil and other liquids that have been transported in a pipeline. The conventional assembly of orifice flanges includes nuts, orifice plate, bolts...

Tuesday, May 08, 2018

Quantity : 1 - Price : 5315.20 €

volumétriques" ont deux avantages principaux: • Elles permettent de travailler des liquides chargés en paille, branches et débris végétaux car il n'y a pas de turbines, • Elles permettent de travailler à sec car il n'y a pas de presse-étoupe et pas de montée en température. Pompe...

Sunday, April 29, 2018

Quantity : 1000 - Price : 78 USD

1.Combined assembly structure, the first half of the deep 450 cabinet turns on the whole, the rear part of the deep 150 back rack can hang wall, especially convenient installation and maintenance operation, easy to install and transport. 2.The front door adopts 5mm toughened glass...

Friday, April 20, 2018

Quantity : 50 - Price : 37 usd

1.The front door is of single or swing door, with an angle of 130 degrees. 2.The edge of the box is designed with u-shaped groove, waterproof and dustproof.The inner edge of the front door is PU foaming sealing strip （PU foam sealing gasket）, the protection grade can reach IP66. 3...

Saturday, November 04, 2017

Standards Application ISO 5660 Reaction to fire tests-Heat release, smoke production and mass loss rate. ASTM E 1354 Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter BS 476 Pt.15 Fire tests on building materials and...

Wednesday, October 18, 2017

Brief Introduction. This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes: DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring...

Friday, September 01, 2017

A cone calorimeter is a fire test tool that is based on the amount of heat released during the combustion process directly related to the oxygen consumption in the combustion process. The amount of heat generated is directly proportional to the severity of the fire, such as the rate...

Thursday, August 03, 2017

Product description: Surface runoff is the flow of water that occurs when excess water from rain, meltwater, or other sources flows over the earth's surface. This might occur because soil is saturated to full capacity, or because rain arrives more quickly than soil can absorb it....

Wednesday, August 02, 2017

QT-1000/50 Double tipping bucket flowmeter ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- Product description: Surface runoff is the flow of water that occurs when excess water from rain, meltwater, or other sources flows over the earth's surface...

Wednesday, August 02, 2017

Quantity : 50000 squa - Price : USD3/aquare meter

Product Description Superior Quality Multilayer Sintered Metal Wire Mesh Mesh material AISI 304/316/304L/316L, Thickness 3mm,4mm,5mm,6mm,etc Filtration precision 1-500μm Standard size 500X1000X1.7mm Porosity(%) 28/29/30/31/32/35/39 Certifications GB/T6003, ISO 3310, BS410...

Wednesday, August 02, 2017

Quantity : 50000 squa - Price : USD3/aquare meter

Product Description Superior Quality Multilayer Sintered Metal Wire Mesh Mesh material AISI 304/316/304L/316L, Thickness 3mm,4mm,5mm,6mm,etc Filtration precision 1-500μm Standard size 500X1000X1.7mm Porosity(%) 28/29/30/31/32/35/39 Certifications GB/T6003, ISO 3310, BS410...

Friday, January 13, 2017

Quantity : 10000 pcs - Price : 0.125USD

///QUICK DETAILS/// Raw Materials: 99.7% purity aluminum Usage: Cosmetics Model Number: 30115 Size: 30 mm DIA x 115 mm L Capacity/Volume: 50 ml Production Capacity: 3,000,000 pieces per month Minimum Order Quantity: 10,000 pieces per variant Lead Time: 25 days Packaging...

Saturday, January 07, 2017

Quantity : 10000 - Price : 50,00 €

high quantity orifice flanges black malleable iron threaded floor flanges 1.Product name：high quantity orifice flanges black malleable iron threaded floor flanges 2.Material：（1）Carbon steel：ASTM A105. ASTM A350 LF1. LF2, CL1/CL2, A234, S235JRG2, P245GH,P250GH, P280GHM 16MN, 20MN...

Wednesday, December 07, 2016

Price : $5

Comparing to other common water jet orifice : higher hardness, higher density, higher wear resistance, higher stability.Consistent and long service life. 1.Application in metallic material cutting To cut the metallic materials that used for architectural decoration, such as stainless steel...

Friday, November 25, 2016

Quantity : 10000000 p - Price : 1 000,00 €

Abrasion resistant ceramic lined pipe from a single spool piece to complete piping systems. We specialize in ceramic restriction orifice plates and flow conditioning assemblies to tame the most demanding flow applications. Ceramic-lined pipe and fittings are designed to outlast...

Tuesday, August 30, 2016

Price : 10,00 €

EHVC SERIES,Website: http://www.ehhydraulics.com, EHVCSS SERIES 2-WAY HIGH PRESSURE CNG BALL VALVE (CARBON STEEL, STAINLESS STEEL 316) COMPRESSION TYRE　INTERCHANGE：DK V86/VC86 SERIESSPECIFICATIONS：·Body: carbon steel or stainless steel 316·Ball: stainless steel ·Stem: carbon steel...

Tuesday, May 03, 2016

Quantity : MOQ 100 pc - Price : usd130

1.ANSI FLANGES Standard: ANSI B16.5ANSI B16.47MSS SP44ANSI B16.36 ANSI B16.48 Types: Welding Neck Flanges, Slip on Flanges, Threaded Flanges, Socket Welding Flanges, Blind Flanges, Orifice Flanges, Lap Joint Flanges, Ring Joint Flanges, Long Welding Neck Flanges, Figure 8 Blanks...

Wednesday, March 16, 2016

Quantity : 1500 sets - Price : USD2300/Set by air c

ANCN factory produce high quality , intelligent multivariable DP flow meter with throttle device of orifice. Please contact us for more details. Location : Rm1112,C2 building of Haijing Plaza, Fengcheng 2nd road, 710016 Xi'an, Contact : John Wang, +86 29 86522755

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Wednesday, February 24, 2016

Before the curing Appearance White paste Relative density 1.60～1.70(g/cm3) Surface drying time ≤15(min) After the curing Tensile strength ≥1.5（MPa） Elongation At Break ≥150(%) Shear strength ≥2.0(MPa) Hardness 35～45(Shore A) Temperature Range -60～200(℃) Volume resistivity 2...