FIBERS - 7703 ads

Friday, July 14, 2023

This baby dry diaper overnight is made of imported fluff pulp and polymer, soft, and has high absorption capacity, that is, a 3 month old dry diaper overnight . The ADL diversion layer can accelerate the absorption speed, baby diaper dry after 6 hours, and super long absorption...

Friday, July 14, 2023

Like MTP®/MPO cable, MTP®/MPO Shuffle cable is also used for connecting MTP® modules together as a permanent link, and it also be used with plug-and-play modules or MTP®/MPO connector panels to achieve multi-level connection of the extension of the pre-terminated trunk cable by MTP®/MPO panel...

Friday, July 14, 2023

MTP/MPO cable assembly use MPO or MTP® multi-fiber connectors. MTP®/MPO Fiber Patch Cord greatly saves space and is very convenient to use. Based on single ferrule MT technology, the MPO Fiber Patch Cord assemblies provide up to 72 fiber connections in a single point, reducing the...

Friday, July 14, 2023

PA6 FR is a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA 6 GF30 flame retardant free of halogens has achieved full coverage from electronic&electrical fields to the industrial, commodity consumer market...

Friday, July 14, 2023

PA6 GF30 FR is a PA6 with 30% glass-fibers and halogens flame retardant. PA 6 GF30 Halogenated FR Features Glass fiber reinforced 30% PA66 PA6 Density(g/cm3) 1.12-1.14 1.38 Water absorption(%) 1.3-1.9 1 Surface hardness M100 M100 Shrinkage(%) 0.5 0.4 Continuous heat...

Friday, July 14, 2023

PA6 GF 20 has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20 products for many years. We can provide you with the best chemical material. If you need high-quality PA6 GF20...

Friday, July 14, 2023

T & S MTP® / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed by engineers at T&S, our MTP®/MPO loopback adapter can transmit the optical network signal from the transmitter to the receiver, thereby...

Friday, July 14, 2023

PA6 15GF with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Friday, July 14, 2023

What Is PA6 ? As an engineered plastics company, Anmei focuses on the production of modified engineering plastics, among which high-performance nylon 6 engineering plastics are one of our main products. We have nylon 6 modified plastics of heat-resistant, reinforced, toughened, flame-retardant...

Friday, July 14, 2023

MPO/MTP® Hydra cable assemblies is deployed inside plug and play cassette modules. It is used for multi-fiber to single-fiber splitting out interconnects. This solution is a 12-colored 0.9mm cable utilizing an MPO/MTP® connector on one end and generic connectors (such as LC, SC, FC, etc...)

Friday, July 14, 2023

MTP/MPO harness cables are a kind of MTP®/MPO fanout harness cable or breakout fiber optic harness assembly with one MTP®/MPO connector on one end and multiple single-fiber connectors (LC, SC, FC, etc.) on the other end, designed for data distribution and routing to patch panels...

Friday, July 14, 2023

PA66GF50 is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added to be used in injection molding products. Typical Application of PA66 GF50 (A2011J) PA 6.6 GF50 HB grade is applied...

Friday, July 14, 2023

T&S grade B patch cord connector is the patch cord with the random mating performance of Grade B as IEC-61753-1 defined, more than 97% of maximum 0.25dB random mated with each other and the average is less than 0.12dB. Simplex, duplex grade patch cable b is well fabricated and...

Friday, July 14, 2023

Fiber Stub is a ceramic (zirconia) capillary assembled with optical fiber. It is the most important component when connecting receptacle Modules such as TOSA and ROSA assemblies. Fiber stubs are fitted into the receptacle modules to achieve a stable connection with the fiber stub...

Friday, July 14, 2023

Quantity : 200000pcs/ - Price : usd5-usd25

As a horse rider, It is important to choose good quality equestrian rider wear clothing and riding wear such as breeches, leggings, base layers, jackets, T-shirts, halters, etc. As one of the best horse clothing manufacturers, SGL Sports Clothing Co., Ltd has about 6 years of experience...

Friday, July 14, 2023

MEISU's Mechanical Optical Switch is driven by a relay to control the prism to turn, thus switch the path. With several channels such as 1x2 optical switch, 1x4 optical switch,2x2 optical switch, this optical switch is normally used for OLP (Optical Fiber Line Protection) system....

Friday, July 14, 2023

One dimensional linear fiber array is made by placing M / MM / PM fibers on a V-grooved substrate at specified spacing ( pitch ). As for these V groove fiber optic array, or the so-called optical V groove array, they are normally fixed into the grooves with epoxy and pressed by a glass cover...

Friday, July 14, 2023

In some optical application, lens, reflector and other micro-optics components are normally needed to be assembled on optical fibers' end face. We can also process the fiber tip into a kind of lens. At present, MEISU has the first-class optical fiber lens processing technology, and...

Friday, July 14, 2023

High temperature resistant connector uses special fiber with high temperature survivable coating and special epoxy, which makes it resistant for 260°C and reflowable as well. HT(260℃）Connector INQUIRE NOW HT(260℃）Connector Feature Fiber Type: SM, MM, PM, Transmitting energy fiber Connector Type...))

Friday, July 14, 2023

High power fiber collimator & Focuser normally consists of a HT fiber such as gold-coated fiber, HT epoxy and optical lens. As for the characteristics of MEISU's high-temperature fiber collimator and focuser, it is 1000℃ resistable and extremely suitable for high-temperature fiber...

Friday, July 14, 2023

MEISU's High Power Optical Switch is driven by a relay to control the prism to turn, thus switch the path. This kind of high power switch is realized by specializing the fiber and the prism to make it stand higher optical power. How It WorksDifferent from regular optical switches...

Friday, July 14, 2023

N95, N99 cloth, N100 cloth is mainly used for folding masks and cup-shaped masks in medical and surgical industries. The Overview of N95, N99, N100 Medical Grade PP Meltblown Fabric N95, N99, N100 polypropylene meltblown cloth which is made from meltblown fabric or meltblown nonwoven...

Friday, July 14, 2023

KF80 KF94 KF99 Melt blown non woven fabric are mainly used for manufacturing industrial dust-proof face masks, fish shaped face masks, foldable face masks, etc.. The Overview of KF80, KF99, KF94 Melt Brown Filter KF80, KF94, KF99 pp Melt blown non woven fabric are mainly used for...

Wednesday, July 12, 2023

Price : 2.4-2.9$/kg

What Is Stabiliser 466? Description Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, that can easily be soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products....

Wednesday, July 12, 2023

Price : 2.4-2.9$/kg

Sodium carboxymethyl cellulose gum (Na-CMC or cellulose gum) is the most widely used and most frequently used type of anionic cellulose ether. It is a white fibrous or granulated powder. Odorless, tasteless, non-toxic, hygroscopic, easily soluble in both hot and cold water, obtained...

Tuesday, July 11, 2023

Silk jacquard fabric is a luxurious fabric that is characterized by intricate designs woven into the fabric. Here are some advantages of silk jacquard fabric: Soft and comfortable: Silk jacquard fabric is soft to the touch and feels comfortable against the skin. Durable: Silk is...

Tuesday, July 11, 2023

The reverse pulse jet dust collector is a polyester filter cartridge type with an automatic pulse-jet cleaning system. It absorbs the dusty, through filtering, the dusty will be collected into the powder box, and the clean air blow out. The feature of this reverse pulse dust collector...

Saturday, July 08, 2023

DTF (Direct to transfer film) is a new technology. DTF printer, DTF ink, DTF powder, and heat press are necessary for the DTF printing process. It is maximum to save the time and cost for users compared with DTG, laser toner, or screen printing. Classified by the finished effect,...

Saturday, July 08, 2023

Midea Heat Pump Dryer Review Midea heat pump dryer is a new-platform dryer, carrying multiple newly-developed functions to make your life easier. Midea Crown C07 dryer can match with C07 chinese washer and dryer to achieve a more completed washing effect. The heat pump and I-clean...

Saturday, July 08, 2023

Cowave Automated portable SATCOM Terminal adopts innovative mechanical structure design, is easy to assemble and store, and can be quickly deployed in various environments. After startup, the equipment will automatically align with the satellite and enter the network, and establish...