LARGE - 19017 ads

Thursday, February 08, 2018

co2 clothing laser cutting machine price for Plastic Specifications: • Laser-type : Sealed CO2 laser tube, water-cooling, 10.6um • Laser power: 80W(other wattages available) • Machine Power: 220VAC • Engraving area: 1200*900mm, 1300*900mm, 1400*900mm, 1400*1000mm, 1600*1000mm(other...)

Wednesday, February 07, 2018

Price : 3 000,00 €

2D HIFU Machine principle: Adopting high intensity focused ultrasound, 2D Hifu can reach as deep as SMAS layer (3~4.5mm) and focus the heat energy produced by high-frequency vibration on one point. Then the interior heat is solidified from the exterior and contributes to the tightening...

Wednesday, February 07, 2018

W fender is one of the most effective dock fenders for sale products at present. This particular design guarantees greater contact area and smaller surface pressure. At the same time, compared with other large fenders, the installation is very simple, and all of them are very popular...

Tuesday, February 06, 2018

Quantity : 10 sets pe - Price : factory price

The plastic-aluminium separation system allows a continuous industrial-scale process for separating aluminum and polyethylene/plastic in ACP, or other composite wastes. Dry treatment with high efficiency crusher, mill and electrostatic separator system. Application of Aluminum–Polyethylene...

Tuesday, February 06, 2018

Quantity : 10 sets pe - Price : factory price

E-waste precious metal refining recycling system provides an eco-friendly solution for refining and recycling valuable precious metals like gold, silver, palladium and platinum from electronic waste. Features of E-waste Precious Metal Recycling Plant - After proper treatment, waste...

Tuesday, February 06, 2018

Quantity : 10 sets pe - Price : factory price

Plastic crusher, also called plastic crushing mill, is an indispensable plastic crushing and recycling equipment for plastic injection industry. Application Fields: This waste plastic crusher machine is mainly used in plastics and aluminum plastic crushing business and recycling fields...

Tuesday, February 06, 2018

Quantity : 10 sets pe - Price : factory price

Dual shaft shredders can be employed as either a primary or secondary shredder and can be seen working anywhere from the waste management company to biofuel producers; Depending on requirement, these discs (blades) are available in a wide range of quantities, qualities and shapes...

Tuesday, February 06, 2018

Quantity : 10 sets pe - Price : factory price

Advantages of activated carbon adsorption device: - The adsorption efficiency is up to 90%, it has the large capacity and wide application. - Activated carbon has the characteristics of low price, wide range of sources, and so on. - The operation is simple, safe and reliable. -...

Tuesday, February 06, 2018

Quantity : 10 sets pe - Price : factory price

Features of Pulse-Jet Fabric Filter ◇ Wide application and high practicability. Pulse-jet bag filter dust collector can control dust of different particle diameters and properties. It is widely used in many kinds of industries, such as machinery, chemical industry, metallurgy, construction...

Sunday, February 04, 2018

Quantity : 1 kg - Price : $15-40

Product Description Stevia Stevia is a small shrub like perennial plant which belongs to the sunflower (Asteraceae) family. It is also known as Eupatorium rebaudianum, sweetleaf, honeyleaf and sugarleaf, and sweet herb of Paraguay. The leaves of Stevia are a source of natural zero-calorie...

Sunday, February 04, 2018

Price : $20-100

Product Description PRODUCT NAME Organic Stevia Extract A Physical Property 1 Color and Appearance Off white fine powder 2 Flavour/odour Characteristic flavour and no odd smell 3 Mesh size 100% through 80 mesh B General Analysis 1 Item of analysis Stevioside 95%...

Sunday, February 04, 2018

Quantity : 1 kg - Price : $100-150

Product Description The spice we refer to as Turmeric is actually the dried and ground rhizome of a plant in the same family as ginger. Turmeric, sometimes called Indian saffron or the golden spice, is a tall plant that grows in Asia and Central America. Curcumin is the active ingredient...

Saturday, February 03, 2018

We have a large quantity of Costa Rican green bananas, which can be distributed anywhere in the world with very competitive prices. Do not hesitate to contact us. Location : Djerba Midoun, 4116 Djerba, Contact : Ahmed Ben Hariz, +21 6 99 52 64 52

Saturday, February 03, 2018

Quantity : 300000ton/ - Price : USD300/ton

Usage: Tube for conveying gas, water, and oil in both and natural gas industries etc. Casing: Casing is a large-diameter pipe that serves as the structural retainer for the walls of oil and gas wells, or well bore.It is inserted into a well bore and cemented in place to protect both...

Saturday, February 03, 2018

Pot bearing is designed for bearing the combinations of vertical loads, horizontal loads, longitudinal and transverse movements and rotations. According to the bearing performance, it can be divided into fixed pot bearing, free sliding pot bearing and guide sliding pot bearing (edge...)

Saturday, February 03, 2018

Elastomeric bearing pad is divided into two types - non-reinforced elastomeric bearing pad and elastomeric bearing with steel plates. They are manufactured from neoprene, natural rubber or others and widely used in the bridges. Elastomeric bearing pad is designed to minimize the effect...

Friday, February 02, 2018

Introduction to Pellet Packing Machine Pellet packing is usually the last step in pellet production line. Pellet packing done by manpower will decrease labor intensity and working efficiency in large scale production. Here you can opt pellet packing machine also named weighing and...

Friday, February 02, 2018

For acquiring better smell and taste, oil spraying machine can be used to spraying oil to the surface of fish feed pellets coming out of the dryer. Azeus oil spraying machine, refitted from a horizontal ribbon mixer, can spray atomized oil with high speed on the up and down surface of pellets...

Friday, February 02, 2018

Pellet cooling process is often taken for granted in pellet production line. Hot pellets from pellet making machine are still soft and easily broken, which can result in a high percentage of fines. By cooling pellets can be harden due to evaporation of water and temperature being...

Friday, February 02, 2018

Waterdrop feed hammer mill, the ideal grinding equipment in fish feed production, gets its name due to the waterdrop structure of grinding chamber. This hammer mill is widely applied in grinding various grains such as corn, broomcorn, wheat, barley, bean and ground cakes and etc....

Friday, February 02, 2018

Single Shaft Fish Feed Mixer Feature 1. High homogeneity: this kind of single shaft design reinforces convection, shearing, and mixing effects. 2. Moderate mixing and high uniformity, no segregation. 3. Human friendly: simple and reasonable structure, convenient maintenance, reliable...

Friday, February 02, 2018

Wet type fish feed extruder, processing variety materials into quality aquatic feed pellets for fish, catfish, shrimps, crab etc., is mainly employed in medium or large size feed processing factory and aquaculture farm. Features of Wet Type Fish Feed Pelletizer 1.Boiler continuously...

Friday, February 02, 2018

Large Scrap Copper Wire / Radiator Recycling Plant How to efficiently process those distorted radiator? Is it possible that one machine can process both copper wire and copper radiator? In order to make it, we launch this model: 1200 copper recycling plant. When using this machine...

Friday, February 02, 2018

Main equipment in PCB recycling plant: One dismantling machine→one shredder→hammer mill→one grinder→one air separator→one pulse-jet bag filter dust collector→one high voltage electrostatic separator. The PCB crushing and separating machinery is used to process the separation of metal...

Thursday, February 01, 2018

Introduction of Theme Water Park Rides Artificial Wave Pool Mahines Wave pool ( called pneumatic wave generation, air press wave generation) is an artificial wave generator and a part of a aqua park. The main machine is a set of wave machine equipments with special wave machine system...

Tuesday, January 30, 2018

Quantity : 1500 - Price : 4,00 €

Large batch of boxes of 150 coffee pods with deadlines from 03/2018 to 12/2018 Price: - € 3 / box for expiration up to 04/2018 - € 4 / box for deadlines from 05/2018 to 12/2018 Location : Loc. Buretto 17/A, 12041 bene vagienna, Contact : CAFFESTOCK MARCO, +39 3398410859

Tuesday, January 30, 2018

Specification: Table board size: 2400*535±50mm Height: 700-1030±50mm Top slip scope: 300±50mm Forward/backward tilt: 32°/30° Lateral tilt: 30° Back rest: +75°/-25° Leg rest: -95° Head board: +90°/-90° Power: AC220V 50Hz Input power: 500VA MT6800 surgical table is an all-electric operating...

Saturday, January 27, 2018

Quantity : 10000 - Price : 0,20 €

Specification Material: Aluminum head,heavy-duty steel. Cable size: Diameter 1.8mm,Length 30cm(Standard). Diameter & length as per custom ordered. Lock Body Size: 14mm(Length)*26mm(Width)*12mm(Thickness) Color: Blue/green/yellow/others Imprinting: Laser-Etch Custom ordered: Bar code...

Friday, January 26, 2018

Finger joints are designed to handle movements of 80 mm to 1,200 mm are composed by steel finger plates, CR sheet, anchor bolts and other components. The rubber sheet is placed on the retractable steel, and anchor bolts help to fix the whole structure. The orientation of the fingers...

Friday, January 26, 2018

Single gap joints for movements of up to 80 mm are expansion joints made of a single set of structural steel, rubber sealing strips and dowel rods. They have mainly 5 types, including GQF-C, GQF-F, GQF-E, GQF-Z and GQF-RG. Being fully anchored within the depth of the road surfacing...