THERMAL - 4581 ads

Friday, September 08, 2023

TTA27 (dicyclopentadiene epoxide) is a typical cycloaliphatic epoxy resin. Its molecular structure is characterized by a close bicyclic structure between two epoxy groups and a stable methylene bridge across the six-membered ring. Therefore, the cured product of TTA27 has the characteristics...

Friday, September 08, 2023

LHY 160 Hydraulic Butt Welding Machine LHYfusion 160 welder is suitable for PE & PP and fittings from 50mm to 160mm OD using low force welding methods. Excellent design and construction provide a premium machine on the worksite and in the factory. This fusion welders includes...

Thursday, September 07, 2023

Name: Hydroxy Terminated Polydimethylsiloxane (Methyl Silicone Oil) Melt Point (℃): -59 Spontaneous combustion point (℃): 450 Saturated vapor pressure (KPa): No Data Explosive: No Data Solubility: Soluble in benzene, toluene, ethylene, ethyl ether, partially soluble in ethanol, butanol...

Thursday, September 07, 2023

Product Name: Hexamethylcyclotrisiloxane Molecular Formula: [(CH3 ) 2 SiO]3 Molecular Weight: 222.47 CAS No.: 541-05-9 UN No.: 1325 Physical and Chemical Properties: Melting Point: 64℃ Boiling Point: 134℃ Relative Density (water=1): 1.12 Appearance: White crystalline lens. Technical...

Thursday, September 07, 2023

TSP diamond is made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resistance, strong impact toughness, good thermally stability, and dense structure, and is widely used in the manufacture of petroleum, geological...

Thursday, September 07, 2023

E-Grind is a professional PCD wire drawing dies supplier and manufacturer, we provide two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is PCD Wire Drawing Dies Used for...

Thursday, September 07, 2023

E-Grind produces high-quality Polycrystalline diamond composite(PDC) and polycrystalline diamond compact cutters. Polycrystalline diamond composite(PDC China) sheet is made of diamond particles and cemented carbide matrix sintered at 60,000 atmospheres, high temperature and high pressure...

Thursday, September 07, 2023

As one of the most professional abrasive powder suppliers in China, E-Grind offers a full range of superabrasives: Synthetic diamond, Cubid Boron Nitrid and related Solid products like CVD, TSP, PDC, PCD&PCBN, Diamond Wire-Draing Die blanks, for Drilling, Sawing, Cutting, Grinding...

Thursday, September 07, 2023

Using borosilicate glass and having a low coefficient of thermal expansion, 4 oz glass bottles with lids wholesale caps can resist chemical erosion, high-temperature differential impact. It has international standard taps.The main specifications are 4oz, 5oz, 8 oz glass bottles bulk ...

Thursday, September 07, 2023

Quantity : 5000 - Price : 0-100

Definition of aluminum die casting parts Aluminum alloy die casting is a kind of pressure casting part, which uses the die casting mechanical die casting machine to install the casting mould, and pours the heated liquid aluminum alloy into the feed port of the die casting machine...

Wednesday, September 06, 2023

Copper tape, also called copper foil shielding tape, is made of copper with a purity higher than 99.95% as the base material and coated with acrylic adhesive. The copper sticky tape is divided into single conductive and double conductive: single conductive coated with non-conductive glue...

Wednesday, September 06, 2023

lack polyester tape also called as a black shading tape, Black polyester tape is made of polyester film as the base material and coated with high temperature resistant silicone gel. Black polyester tape is insulated and high temperature resistant, with a transparent release film optional...

Wednesday, September 06, 2023

Aluminum foil tape is also called as foil duct tape or aluminum foil duct tape, Aluminum foil tape is made of high-quality pressure-sensitive acrylic adhesive and pure aluminum foil as the base material. The aluminum foil adhesive tape takes release paper as the substrate. It is divided...

Wednesday, September 06, 2023

Steel Fiber For Industrial Floors Steel fiber reinforced concrete industrial building ground There are many kinds of industrial building floors, but the application of steel fiber reinforced concrete to build industrial building floors is a new variety developed in recent years. It...

Wednesday, September 06, 2023

Price : USD 150- 600

JIUWU company produces the ceramic ultrafiltration membranes with the pore size 20nm, 50nm and so on with reasonable ultrafiltration membrane price. JIUWU company offers a large choice of ceramic uf membranes with different geometries and cut-offs to meet your process requirements in viscosity...

Wednesday, September 06, 2023

Pigeon Medical Respiratory Humidifier PN-2000FB offers an integrated solution to provide humidified and warmed gas to those patients in need of mechanical ventilation or other respiratory supports. With built in servo control feedback system and alarm system, it incorporates to monitor...

Wednesday, September 06, 2023

PDC cutters used for PDC bit, PDC hole opener, PDC reamer Overview of PDC cutter PDC drill bit cutters are made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high temperature. It has high hardness, high wear resistance and thermal conductivity...

Tuesday, September 05, 2023

Glow In The dark vinyl htv Also called luminous heat transfer film. This is an photoluminescent effect which enables light storing with a long afterglow. the glow will begin to diminish with time after the light source intended.Specifications Of dtf glow in the dark Transfer Vinyl...

Tuesday, September 05, 2023

The accelerated ageing chamber is a testing equipment used to simulate and evaluate the aging process of a product under controlled conditions in a shorter time frame than natural aging. Accelerated aging oven chambers works by subjecting the product to specific environmental conditions...

Tuesday, September 05, 2023

Yuanyao is one of the most professional environmental stability test chamber manufacturers in China and we have a wide range of environmental test chambers(for environmental simulation) for sale. We have years of experience in environment test equipment manufacturing. Whether you...

Tuesday, September 05, 2023

Anode Carbon Block Overview It participates in electrochemical reactions and directs current into the electrolytic cell. Each prebaked carbon anode block is preassembled by 1 ~ 3 anode carbon blocks, anode guide rod and steel claw (see anode carbon block assembly). The single anode...

Tuesday, September 05, 2023

According to the classification of electric furnace steelmaking power level and the difference of raw materials used for producing Graphite electrodes as well as the physical and chemical indexes of finished product, graphite electrodes are divided into three types: regular power...

Saturday, September 02, 2023

As high-performance Cr-Mo-V hot work die steel, HS DVN / HS DVN-Nb steel has high high-temperature strength and thermal fatigue resistance, is widely used in casting dies, hot extrusion dies, hot punching dies, hot forging dies, etc. Chemical properties of HS DVN/ HS DVN-Nb Steel...

Saturday, September 02, 2023

HS 2344 using 1.2344 steel is pressure-resistant hot-working die steel. The performance and use of HS material 2344 are basically the same as that of H13 steel, and it is one of the widely used hot work die steels. HS 2344 steel material can withstand huge mechanical stress, as well...

Saturday, September 02, 2023

As large-size (thickness range 400-750mm) and high-polished plastic mold steel, HS 2343ESR-S, as a 1.2343 steel equivalent material, has higher purity and good structure uniformity through unique smelting and heat treatment process. The hot work steel has good polishing performance...

Friday, September 01, 2023

SMC Auto Parts Description Auto parts made from sheet molding compound (SMC) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption is greatly reduced. SMC Automobile Parts Manufacturer Waiwaitree...

Thursday, August 31, 2023

Graphite Blocks Isostatically pressed graphite is a new graphite product developed in the 1960s, which has a series of excellent properties. For example, the isostatic graphite heat resistance is good, in an inert atmosphere, with the increase of the temperature of its mechanical...

Thursday, August 31, 2023

Quantity : 500,000 un - Price : 500-20000USD

Balance of performance and value, and intelligent features that are affordable and easy to use. Product Categories within Eco Series All Eco Series are NDAA Compliant Security Cameras Bullet IP Eco Series Camera Eco series bullet IP camera contains 5MP, 4MP, 3MP cameras, cost-effective balance...

Thursday, August 31, 2023

Quantity : 500,000 un - Price : 500-20000USD

Thermal bullet camera combines world-class imaging and camera technology with innovative IP network technology. They help quickly identify people who may have a high body temperature in a non-contact way. Why Choose a Bullet Thermal Camera? Sunell Thermal Bullet Network Cameras...

Wednesday, August 30, 2023

Magnetic Performance: Br: 10.4 kGs, Hcb: 9.8 kOe, Hcj: 10.6 kOe, (BH)max: 26 MGOe Magnetic Strength: 31 LBS each Pole Orientation: Magnetized through 1/2", magnetic poles are on the 2x1/2" surfaces Maximum Operating Temperature: 608 degree F or 320 degree C MEANK produces high-quality...