GALVO - 71 ads

Saturday, March 18, 2023

UltraScan products cover a comprehensive range of models, suitable for customers with high cost performance requirements and substitute imported similar products. The coating film selection of galvanometer mirror scanner is rich, UV, green, fiber, CO2 and other coating options. Driver...

Saturday, March 18, 2023

Different from galvanometer control technology, polygon mirror laser scanner has rotary mirror which adopts advanced bearing and spindle design, rotating speed up to 50,000 RPM, scanning rate over 100 KHz, scanning speed up to 512 m/s (1600 lines/s) and makes ultra-fast and ultra-cutting-edge...

Thursday, January 12, 2023

5-axis Laser Micromachining System The ordinary precession drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining...

Thursday, January 12, 2023

The ordinary laser drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining system can also process the inverted cone hole...

Thursday, January 12, 2023

The four-axis linkage system is mainly composed of XY galvanometers, XY motion platform, platform driver, GMC control card and general marking software. It has the function of unlimited field of vision, synchronize the linear servo shaft and laser scanning galvanometer. When the high...

Thursday, January 12, 2023

The 3d dynamic focusing system mainly consists of XY galvo, dynamic focusing module, control card and upper computer software. By changing the position of the dynamic focusing mirror, its focus is still on the surface of the workpiece, so as to achieve the effect of the same diameter...

Thursday, January 12, 2023

The large-format 3D laser scanner head is free of the processing range limits of 2D field lenses, and can be flexibly selected 100x100mm-2000x2000mm. Package type three axis galvanometer, eliminate customer Z axis optical path debugging, easy installation and adjustment. According...

Thursday, January 12, 2023

Excellent driver board and galvanometer matching to achieve superior speed performance, reduce the first stroke of a character and corner burning phenomenon, strict mirror quality, ensure the requirements of mirror flatness and damage threshold. The galvo scan head produced by Han's...

Thursday, January 12, 2023

Han's Scanner focuses on scanning galvanometer system solutions. Our products include Ultragalvo photoelectric scanning galvanometer, Extragalvo grating scanning galvanometer, 3D scanning galvanometer, etc., focusing on galvanometer and motion control system solutions, existing four-axis...

Friday, November 11, 2022

GMC control card supports XY2-100, SPI and other galvanometer communication protocols, Ethernet communication, easy to expand the multi-control card synchronization control. High precision tri-axial correction algorithm ensures large area machining accuracy. Skywriting guarantees...

Friday, November 11, 2022

GMC is a galvanometer motion laser control card independently developed by Shenzhen Hans Scanner S&T Co., LTD. GMC galvo control card embedded software architecture, powerful performance, rich integration functions. Flexible laser control interface, support a variety of common laser control...

Friday, November 11, 2022

The 2.5D&3D system has the function of conventional 2D galvanometer, and a zoom module is added on the basis of the conventional galvanometer, which solves the problem that the traditional laser scanning galvanometer can only realize plane scanning and small range scanning,...

Friday, November 11, 2022

High power galvo laser welding is independently developed by Hans Scanner. The system after fully validated, with carefully designed double wind cooling water circulation system and excellent whole sealing, strict selection and testing of optical element, the assembly process, can...

Friday, November 11, 2022

The traditional Z-axis focusing module adopts voice coil motor or galvanometer structure, which has high load quality, slow response time and low dynamic performance. VCM Z-axis focusing module breaks through the traditional perspective optical path design scheme and greatly improves...

Friday, November 11, 2022

VCM G2 adopts full digital laser galvanometer driver, digital driver board of basic FPGA, stable performance, not easy to be disturbed, flexible to use, easy to debug. Modular design, easy to assemble. According to customer requirements, we can choose lenses with different aperture...

Friday, September 02, 2022

VCM F1 adopts the traditional voice coil motor design scheme, linear motor structure is simple, high stability. Using high precision grating ruler as position feedback, position resolution accuracy is 25 bits. Digital encoder technology greatly improves positioning accuracy, in addition...

Friday, September 02, 2022

The single-axis galvo motor system contains a high-precision sensor and a motor part based on moving magnet technology. The motor rotor is optimized for excellent dynamic properties and response characteristics. In addition, the motor features high rigidity and low friction. Moreover...

Friday, September 02, 2022

Compared with the photoelectric analog galvanometer, the installation of the grating requires a larger space, so the encoder part at the bottom of the grating digital galvanometer is higher than that of the photoelectric analog galvanometer. The grating digital galvanometer is more...

Friday, September 02, 2022

Hansscanner digital driver board can drive the full range of Han's Scanner photoelectric galvanometer motor and grating galvanometer motor, one driver board can drive two galvanometer motors at the same time. Support a variety of digital communication protocols; supports state output...

Friday, September 02, 2022

Han's galvo scanning system analog galvo driver board is designed for the full series of Han's Scanner photoelectric galvanometer motor, using the traditional PID closed-loop control mode, stable and reliable performance; with a variety of different configurations, support analog...

Saturday, July 09, 2022

5-axis Laser Micromachining System The ordinary precession drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining...

Saturday, July 09, 2022

The ordinary laser drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining system can also process the inverted cone hole...

Saturday, July 09, 2022

The four-axis linkage system is mainly composed of XY galvanometers, XY motion platform, platform driver, GMC control card and general marking software. It has the function of unlimited field of vision, synchronize the linear servo shaft and laser scanning galvanometer. When the high...

Saturday, July 09, 2022

The 3d dynamic focusing system mainly consists of XY galvo, dynamic focusing module, control card and upper computer software. By changing the position of the dynamic focusing mirror, its focus is still on the surface of the workpiece, so as to achieve the effect of the same diameter...

Saturday, July 09, 2022

The large-format 3D laser scanner head is free of the processing range limits of 2D field lenses, and can be flexibly selected 100x100mm-2000x2000mm. Package type three axis galvanometer, eliminate customer Z axis optical path debugging, easy installation and adjustment. According...

Saturday, July 09, 2022

Excellent driver board and galvanometer matching to achieve superior speed performance, reduce the first stroke of a character and corner burning phenomenon, strict mirror quality, ensure the requirements of mirror flatness and damage threshold. The galvo scan head produced by Han's...

Saturday, July 09, 2022

Han's Scanner focuses on scanning galvanometer system solutions. Our products include Ultragalvo photoelectric scanning galvanometer, Extragalvo grating scanning galvanometer, 3D scanning galvanometer, etc., focusing on galvanometer and motion control system solutions, existing four-axis...

Friday, April 08, 2022

GMC control card supports XY2-100, SPI and other galvanometer communication protocols, Ethernet communication, easy to expand the multi-control card synchronization control. High precision tri-axial correction algorithm ensures large area machining accuracy. Skywriting guarantees...

Friday, April 08, 2022

Common Fθ lens is a series of general lens used in laser fields. The common F-theta lens has developed into the 3th generation product after experiencing continuous improvement of Optical Component Center. The materials of the 3th generation product all belong to world-class domestic...

Friday, April 08, 2022

GMC is a galvanometer motion control card independently developed by Shenzhen Han's Scanner S&T Co., LTD. GMC galvo control card embedded software architecture, powerful performance, rich integration functions. Flexible laser control interface, support a variety of common laser control...