SHRINKAGE - 878 ads

Wednesday, July 28, 2021

Quantity : 1 - Price : 1,00 €

It is used in the fields of insulation and mechanical protection in the environment of chemical corrosion resistance and high temperature resistance, such as the insulation, protection or identification of transformers and sensors in the industries of electronics, communication, automobile...

Saturday, July 24, 2021

Product Features: Silicone Heat Shrinkable Tube is made of silicone with heat shrinkage property after modification of silicone rubber. It not only has excellent performance of general silicone rubber tube, such as high temperature resistance, high pressure resistance, soft and elastic property...

Saturday, July 24, 2021

The double wall semi-rigid heat shrinkable end is composed of semi-rigid polyolefin and hot melt adhesive. The outer layer is radiation crosslinked polyolefin and the inner layer is hot melt adhesive. One end of the product has been pre contracted and sealed, which has double effects...

Saturday, July 24, 2021

The double wall heat shrinkable tube with adhesive can shrink at lower temperature, external insulation, flame retardant, and can buffer mechanical strain and sealing property. It is mainly used in the case where the protective material does not need to be able to withstand higher...

Saturday, July 24, 2021

Fluororubber heat shrinkable tube is made of fluororubber and polymer elastomer by radiation modification. It can be used at high temperature for a long time. It is resistant to diesel oil, aviation fuel and high temperature fluid. It can be used for the protection of military vehicles...

Saturday, July 24, 2021

Yellow green heat shrinkable tube is widely used for identification of ground wire in wire harness or cable, identification of special cable, generatrix or pipe, etc., as warning and identification - Heat shrinkable ratio: 2: 1, 3: 1 - Initial shrinkage temperature: ≥70℃ - Complete...

Saturday, July 24, 2021

Tengzhou Star smith Metal Products Co., Ltd. (SDS）is one of the top three steel fiber manufacturer specializing in steel fiber production in China and has participated in the construction of national projects several times. Established in 2011, we can provide an annual production...)

Saturday, July 24, 2021

Tengzhou Star smith Metal Products Co., Ltd. (SDS）is one of the top three steel fiber manufacturer specializing in steel fiber production in China and has participated in the construction of national projects several times. Established in 2011, we can provide an annual production...)

Wednesday, July 21, 2021

We are a professional manufacturer of heat shrink tubing and have been doing business in this field for more than 10 years, with a good reputation and many regular customers all over the world. We can also accept any kind of customized heat shrink tubing type, as well as customized...

Wednesday, July 21, 2021

We are a professional manufacturer of heat shrink tubing and have been doing business in this field for more than 10 years, with a good reputation and many regular customers all over the world. We can also accept any kind of customized heat shrink tubing type, as well as customized...

Wednesday, July 21, 2021

We are a professional manufacturer of heat shrink tubing and have been doing business in this field for more than 10 years, with a good reputation and many regular customers all over the world. We can also accept any kind of customized heat shrink tubing type, as well as customized...

Wednesday, July 21, 2021

We are a professional manufacturer of heat shrink tubing and have been doing business in this field for more than 10 years, with a good reputation and many regular customers all over the world. We can also accept any kind of customized heat shrink tubing type, as well as customized...

Thursday, June 17, 2021

Established in the year of 1996, HanKing Mould Enginering Ltd. starts the business in mold making and injection molding in Longgang, Shenzhen, China, after years of development, we have become Chinese injection molding manufacturers which including plastic injection molding, injection moulding...

Wednesday, June 09, 2021

ZF Electronics, as one of the top circuit board supplier in China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal core PCB, heavy copper PCB, rigid PCB and rigid-flex PCB. It provide pcb board, single layer pcb, multi layer board, rigid flex pcb, aluminum pcb,etc...

Thursday, June 03, 2021

Quantity : 10000ton/y - Price : $2.2/kg~$6/kg

We provide different types of magnetic materials, for example, hard and soft magnets, bonded magnetic compounds, ferromagnetic compounds to meet the diverse application requirements for our customers, including hard magnetic bonded compounds and soft magnetic bonded compounds. If...

Tuesday, May 25, 2021

Quantity : 2000 tons - Price : USD 0.8-1.3/kg

Micro steel fiber are made of copper coated steel wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high strength, high tenacity, very good durability, and volume stability. It is a good and a new kind of construction materials. Micro steel...

Tuesday, May 25, 2021

Quantity : 2000 tons - Price : USD 0.8-1.3/kg

The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete and shotcrete in its hardened state. Tengzhou SDS steel fibre make concrete have extremely high flexural strength and shear strength, and have good toughness, crack resistance...

Tuesday, April 27, 2021

Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, can easily soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products. The main raw material of CMC is refined cotton...

Wednesday, April 14, 2021

A wire that has a gauge of around 40AWg up to 28AWG and with a 30 volts voltage rating, is called a thin wire. It is a very small hoop up wire and is often seen used in highly sophisticated machinery, like mobile phones. XLPE or XLPVC is usually the material used for its insulation...

Wednesday, March 03, 2021

Packaging & Bag *Material: clear PVC 0.15mm (PVC cold crack resistant minus 15 degree).Packaging & Bag *Material: clear PVC 0.15mm (PVC cold crack resistant minus 15 degree). Packaging & Bag *Material: clear PVC 0.15mm (PVC cold crack resistant minus 15 degree). *Structure...

Saturday, January 23, 2021

High temperature fiberglass filter bag The glass fiber continuous filter cloth is composed of continuous glass fiber yarns for both warp and weft yarns. The specially processed and manufactured glass fiber fabric is an ideal high-temperature resistant filter material. The filter...

Wednesday, January 20, 2021

Quantity : 1 TON - Price : $800

Item Units Range Denier dpf 0.9-6 Length mm 6-64 Tenacity CN g/d 2.5-5 Elongation at Break % 48-65 Fiber Specific Resistance Ω.cm 1×108 - 6×108 Boiling Water Shrinkage % 0.4-4 Crimp CPI 7-14 Moisture % 0.3-1.7 Location : 2and Floor,Letsya Towers,Ali Hassan Mwinyi Rd...

Tuesday, January 12, 2021

Quantity : 1set - Price : 5000USD-30000USD

What is insert molding? Insert molding refers to a molding process in which an integrated product is made by inserting a pre-prepared metal material insert into a mould and then injecting the plastic resin, and the molten material is bonded to the insert, cooled and solidified. Insert...

Saturday, January 09, 2021

Quantity : 100000pcs/ - Price : 0.8-3.7usd/pcs

Nowadays, clothes have become people's favorite. It's the trend of the times. Many people buy clothes depending on the clothes packaging box. No matter how beautiful the clothes are, how much they like them. As long as the packaging box doesn't like it so much, the clothes will...

Thursday, November 19, 2020

Price : 100USD

HQC bamboo fence cladding is synonymous with nobility and fashion.In modern cities, villas, residential areas, hotels, and parks, etc. HQC Bamboo Deep Strand Woven Bamboo Wall Cladding can be seen everywhere. HQC bamboo interior wall cladding texture is natural like wood, but is not wood...

Thursday, August 27, 2020

Price : 2.4-2.9$/kg

Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, can easily soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products. The main raw material of CMC is refined cotton...

Thursday, August 27, 2020

Quantity : 1000PCS - Price : 0.1- 6

Description of Consumer Parts Plastic Mold: Plastic Valve 3 Plate Mould Tolerance: +-0.01mm Surface: SPI A2 & VDI 3400 Part material: PPO food grade Shrinkage: 0.6% Cavity steel: ASSAB 8407 HanKing Mold Tolerances Plates and Mold Base Components: ± 0.013 mm (± 0.0005 in) Cavity components...

Thursday, August 27, 2020

Quantity : 1000PCS - Price : 0.1- 6

Brief Introduction of Hanking ABS molds Mould Name: Plastic Injection ABS Molds Part Material: ABS Product Size: 172*123 mm Product Description: clear window Mould Cavity: 1 Cavity Mould Size: 300*380*250 mm Mould Cavity Steel: ASSAB 8407 Mould Injection System: hot runner Mould Ejection System...

Thursday, August 20, 2020

Price : 1 000,00 €

Polyvinyl Chloride (PVC or Vinyl) is a high strength thermoplastic material widely used in applications, such as , medical devices, wire and cable insulation... the list is endless. It is the world's third-most widely produced synthetic plastic polymer. Polyvinyl Chloride can be injection...

Thursday, August 20, 2020

Price : 1 000,00 €

Polypropylene, abbreviated as PP, is a colorless, odorless, non-toxic, translucent solid substance. Polypropylene (PP) is a thermoplastic synthetic resin with excellent properties. It is a colorless, translucent, thermoplastic and lightweight general-purpose plastic. With chemical resistance...