SHRINKAGE - 878 ads

Tuesday, June 21, 2022

The rotary mold is composed of two-cavity and core sides, the two core sides are the same, only the cavity sides is different which the second color cavity is bigger than the first color, at the beginning of injection molding, the barrel of the two-color injection molding machine...

Saturday, June 18, 2022

Quantity : 1000 - Price : talk in detail

The rapid cooling and rapid heating high-gloss mold temperature machine use the rapid switching between normal temperature water and high-temperature steam to achieve rapid temperature changes in different stages of a molding cycle so that the temperature of the mold can meet the...

Tuesday, June 14, 2022

With more than 20 years of experience in the injection molding industry and equipped with ISO Class 8 Clean Room, Packson plastic injection moulding factory offers Medical Contract Plastic &Rubber Injection Molding, Custom Injection Molding, Insert Molding and Over Molding by...

Saturday, June 11, 2022

Price : 10-30USD

The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: 1. Improved Low-temperature Resistance: In the application of cable insulant, the modification TPO of ATP can not only meet the requirement of electric performance from the insulant...

Saturday, June 11, 2022

Price : 10-30USD

ATP's HPPO series, New upgrade product of XLPE material sheath for most of the kinds of electronic wires (3385, 3386, 10368, etc.), flat wires, and high-temperature equipment wires that need to pass the UL VW-1 test. 1. UL 94 V0 grade material, fully supports various specifications...

Saturday, June 11, 2022

Price : 10-30USD

The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: 1. Improved Low-temperature Resistance: In the application of cable insulant, the modification TPO of ATP can not only meet the requirement of electric performance from the insulant...

Wednesday, June 08, 2022

SMC, BMC thermosetting plastic products are produced by SMC and plastic smc molding process. Types of BMC/SMC Molded Products BMC SMC Motor SMC/BMC plastic edging motor change the traditional material of iron and aluminum to reduces the process but seals more. High-Voltage Electrical...

Wednesday, June 08, 2022

The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and reduce noise to the lowest level within its ability. The traditional materials for satellite antenna are iron or aluminium. But the better properties of SMC material...

Saturday, May 28, 2022

High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc. Properties...

Saturday, May 21, 2022

Quantity : 2000 tons/ - Price : USD0.8-1.3/kg

Micro steel fibers are made of copper coated steel wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high strength, high tenacity, very good durability, and volume stability. It is a good and a new kind of construction materials. Micro steel...

Saturday, May 21, 2022

Quantity : 2000 tons/ - Price : USD 0.8-1.3/kg

There are many types of steel fibres used in concrete used in concrete. The shotcrete steel fibre for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete...

Wednesday, May 18, 2022

Quantity : 15000 piec - Price : $5-100

It' s extracted from the linseed by SFE-CO2 Extraction. Linum usitatissimum oil is a triglyceride like other fats. Flaxseed oil bulk is distinctive in the fatty acid composition of triglycerides, which contains an unusually large amount of α-linolenic acid, which has a unique response...

Tuesday, May 17, 2022

Quantity : 100000 - Price : 40.00-200.00 USD

Soldier Clothes This combat suit also could be divided into long sleeve combat shirt and combat pants. Not only this combat dress can be used in battle field, officer also could wear it as army soldier uniform. This uniform is modeled after the U.S. military's standard issue battle...

Wednesday, May 11, 2022

Quantity : 5000 - Price : USD0.1-15

Industrial heat shrink using high-quality polymers, scientific formula, mechanical co-mixing polymer alloy, product molding after the electronic accelerator irradiation crosslinking, continuous expansion. Products with environmental protection, soft, flame retardant, fast shrinkage...

Wednesday, May 11, 2022

Quantity : 5000 - Price : USD0.1-15

heat shrink tubing 3 to 1 using high-quality polymers, scientific formula, mechanical co-mixing polymer alloy, product molding after the electronic accelerator irradiation crosslinking, continuous expansion. heat Shrink tubing 3 to 1 products with environmental protection, soft, flame retardant...

Wednesday, May 11, 2022

Quantity : 5000 - Price : USD0.1-15

Heat Shrinkable Tubings As one of shrink wrap tubing manufacturers, our company provide a wide range of material, colors and sizes of Heat shrink tubing(heatshrinks) which have good electrical insulation, mechanical protection, environmental sealing. Heat shrink product is a solid...

Wednesday, May 11, 2022

Price : 100USD

Electronics Product Part With the fast growth in the electronic industry, the demand for injection molding electronics is much higher. The injection molding electronics can be intricate or simple. Intricate injection molding electronics can be economical because they combine many...

Wednesday, May 11, 2022

Price : 100USD

Die casting mould is a method of casting liquid die forging. It is a process completed in a special die casting moulding machine. The major advantage of mould die casting is that thousands of castings can be produced quickly by die casting mould supplier, die casting mould factory...

Saturday, April 30, 2022

Quantity : 5000 sets - Price : USD5,000.00-USD3,000

Ⅰ. Basic situation of the industry economy In the face of fierce market competition, the building materials machinery industry has seen positive achievements in green, service-oriented and international development by strengthening technological innovation and enhancing competitiveness...

Friday, April 29, 2022

Brief Introduction of Hanking ABS molds Mould Name: Plastic Injection ABS Molds Part Material: ABS Product Size: 172*123 mm Product Description: clear window Mould Cavity: 1 Cavity Mould Size: 300*380*250 mm Mould Cavity Steel: ASSAB 8407 Mould Injection System: hot runner Mould Ejection System...

Wednesday, April 20, 2022

Description: Plastic Valve 3 Plate Mould Tolerance: +-0.01mm Surface: SPI A2 & VDI 3400 Part material: PPO food grade Shrinkage: 0.6% Cavity steel: ASSAB 8407 HanKing Mold Tolerances Plates and Mold Base Components: ± 0.013 mm (± 0.0005 in) Cavity components: ± 0.005 mm (± 0.0002...)

Tuesday, April 19, 2022

2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mold...

Tuesday, April 12, 2022

Quantity : 1200sets/y - Price : USD10000-200000

Double heads CNC EDM has two separated spindles and controllers, travel of table is much bigger than regular big EDM machines, each head can do machining on its own. DMNC's large EDM machine is much heavier. A1470 Double Heads CNC EDM Sinker A1880 Double Heads CNC RAM EDM Machine...

Tuesday, April 12, 2022

Quantity : 1200sets/y - Price : USD10000-200000

CNC EDM combines with robot, CMM, electrode and workpiece store station, and CNC high speed milling center to realize fully automatic production. DMNC provides a complete solution, and that's the CNC wire EDM automatic spark erosion machine. ADV400 CNC EDM Machine With Automatic Working...

Tuesday, March 29, 2022

The stainless steel has much better physical properties then iron and normal steel, but it possesses worse casting properties. Because the stainless steel has higher melting temperature point, by the liquid form it has worse flowability and bigger shrinkage ratio, and more easier...

Tuesday, March 29, 2022

The squeeze die casting, also names extrusion casting or liquid die forging, is kind of newly developed metal forming technic which combines the casting process and die forging like method. The basic principle is to fill the liquid metal into the pre-lubricated mold cavity, then gives...

Tuesday, March 29, 2022

The silica sol also shares the name of water glass in general, it is used by the meatal casting process as mold adhesive which is mixed with sand and several other materials. The silica sol is applied to both sand casting and investment casting technics. It is one of the most common...

Tuesday, March 29, 2022

The name grey iron is because of the gray color of the fracture it forms, which is due to the presence of graphite. Grey iron die casting is the most common and widely used casting material. Grey iron is so popular in engineering applications because of its relatively low cost and...

Saturday, March 26, 2022

High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc. Properties...

Friday, March 25, 2022

What Is CMC Food Additive Sodium carboxymethyl cellulose food grade (CMC/cellulose gum) is a kind of cellulose ether, can easily soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products. The main raw material of CMC is refined...