CHEMICAL - 8987 ads

Thursday, June 16, 2022

Quantity : 400 sets/y - Price : $30000~300000/set

What is Masterbatch？ Masterbatch is an indispensable part of the plastic industry. It can not only give colorful plastic products, improve the value of commodities, improve some properties of plastics, but also give special optical properties of materials. In the preparation of masterbatch...

Thursday, June 16, 2022

Barbed T Connector are designed for quick and easy assembly in low-pressure applications, barbed tube/hose connectors are used to combine or divide fluid flow through flexible fluid tubing. High-quality food grade raw material polypropylene and a variety of sizes from 1/16 to 11/32...

Thursday, June 16, 2022

General introduction of SGB10 Cast Resin Transformer: Cast Resin Transformer, is well applied in power plant substation with low voltage device, high voltage device, transformer, and other components integrated, greatly recognized by its functional and energy saving properties...

Wednesday, June 15, 2022

Organic membrane module is a complete unit composed of the membranes, housing, feed inlet, concentrate outlet, and permeate outlet. Organic membrane modules may contain different membrane configurations, including spiral and hollow fiber membrane. OVER VIEW OF ORGANIC MEMBRANE MODULE...

Wednesday, June 15, 2022

In order to meet the scientific requirements of scientific research institutes and enterprises in the early research and development of feed liquid amplification, and we specially design and develop small & pilot machine, which can easily avoid many uncertain factors in the transformation...

Wednesday, June 15, 2022

Ceramic Nanofiltration membrane is relatively recent membrane filtration system, with the purpose of softening and removal of disinfection by-product precursors such as natural organic matter and synthetic organic matter. More ultrafiltration membrane system details here! CHARACTERISTICS...

Wednesday, June 15, 2022

The flat plate membrane is a new type of high temperature plate porous ceramic membrane, which is prepared by high temperature sintering process using inorganic materials such as alumina. Compared with the organic film, ceramic flat sheet membrane has the advantages of good chemical stability...

Wednesday, June 15, 2022

Porous Ceramic Membrane Ceramic membranes (Porous Ceramic Membrane & tubular ceramic membrane) are available for microfiltration, ultrafiltration and nanofiltration as single-channel or multiple-channel elements with channel diameters between 2 and 16mm. The principle of porous...

Wednesday, June 15, 2022

Price : 10-30USD

Provide complete solutions from product design/mold manufacturing/injection mass production. Provide professional medical consumables and medical device molding product mold development and injection molding production services for companies engaged in biotechnology technology development...

Tuesday, June 14, 2022

Product description Blind flange is also called blind board, and its proper name is flange cover. It is a flange without holes in the middle for sealing the pipe plug. There are many types of sealing surface, such as rise face, ring joint face, large or smalltongue face and groove face...

Tuesday, June 14, 2022

FORGED FLANGES We are forged flanges manufacturer, supplier and exporter for a wide range of quality industrial forged steel pressure flanges including welding neck flange, slip-on flanges, socket weld flanges, blind flanges and other shapes for connection applications in the oil...

Tuesday, June 14, 2022

Product description Steel tubing caps, also known as end cap, plug, cap, pipe cap, stuffy head, welded in the end of the pipe or installed on the outside thread of the end of the pipe to cover the pipe plugging fittings. It is used to close the pipeline and has the same function as pipe plugging...

Tuesday, June 14, 2022

Product description We are a stub end manufacturer, supplier and exporte, stub end divided into Europe system, Japan system, America system and lap Joints. ASME/ANSI B61.9 for long type stub end, MSS SP 43 for short stub end. HG20621 for short stub end, GB9118 1TYPE for long stub end...

Tuesday, June 14, 2022

Product description We are manufacturers, reducing tee suppliers, and exporter of reducing tee, branches diameters are different with the other two main pipe diameters and are called three-way with different diameters. Our reducing tee are widely used in construction and maintenance...

Tuesday, June 14, 2022

Product description We are manufacturer, supplier, and exporter of equal tees, which are also understood as straight tees, these equal tees have a diameter that is same to the diameter of the main pipe, as a result, the name equal tee. We furnish ss butt weld equal tees that are set...

Tuesday, June 14, 2022

Quantity : 150000 ton - Price : USD 2500/T to USD 35

Definition of HBI Hot Briquetted Iron, known as HBI or hbi iron ore, is a premium form of Direct Reduced Iron (DRI).As a supplement for pig iron and scrap in electric furnace steel mills. It is a compacted form of direct reduced iron (DRI), which facilitates its handling, storage, and use...

Tuesday, June 14, 2022

Quantity : 150000 ton - Price : USD 2500/T to USD 35

Description of Direct Reduced Iron (DRI Steel) Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron ore (in the form of lumps, pellets, or fines) to iron by a reducing gas or elemental carbon produced from natural gas or coal. Many ores...

Tuesday, June 14, 2022

Quantity : 150000 ton - Price : USD 2500/T to USD 35

Description of Copper Cathode Copper is one of the basic chemical elements. In its nearly pure state, copper is a reddish-orange metal known for its high thermal and electrical conductivity. It is commonly used to produce a wide variety of products, including electrical wire, cooking...

Tuesday, June 14, 2022

As one of the professional oil immersed transformer manufacturers, our oil immersed power transformer is specially developed and designed based on the advanced technology abroad for rough mountainous topography and transportation difficulties to meet the requirement of China oil type...

Tuesday, June 14, 2022

Textile finishing is the process of finishing agent use on the fabric, which can change the surface properties and give special functions to the fabric. For example, water and oil repellent fabric finishing is to use a low surface tension finishing agent to process the fabric, in...

Tuesday, June 14, 2022

[Fixing Agent for Acid Dyes General Information] Fixing agent for acid dyes will be deposited on the surface of the fiber, plugging the pores of acidic dyes dissolved again, thus reducing the possibility of fading, and generally improving the color fastness 1 ~ 1.5. Based on this...

Tuesday, June 14, 2022

[Main composition] Ammonia ethyl ammonia propyl poly silicone emulsion [General properties] Appearance: colorless liquid Ionicity: nonionic/cation PH: 5 ~ 7 Solubility: soluble in water [Product features] 1. Low yellowing 2. After processing the fabric feel smooth, and have excellent...

Tuesday, June 14, 2022

Cotton dyeing is operated in a certain temperature, time, PH value and the required dye fixing agent for cotton. The common agents for cotton dyeing and printing include scouring agent, dye fixing agent, penetrating agent and so on. Choosing cotton fabric dyeing and finishing process...

Tuesday, June 14, 2022

Dyeing auxiliaries are fine chemical products in the textile printing and dyeing industry applications. Dyeing agent is an important type of textile printing and dyeing auxiliaries, generally according to the classification of dyes, to name different types of dyeing agents. Chemical...

Tuesday, June 14, 2022

This dharma acid dyes is a kind of special macromolecule organic mixed acid which is mainly for PH value control and neutralizes the alkali for dyeing fabric or the yarn, is the ideal substitute for acetic acid. [Main composition] Special organic mixed acid [General properties] Appearance...

Tuesday, June 14, 2022

The main component of textile detergent is a surfactant. The surfactant is a kind of organic compounds that contain both hydrophilic and lipophilic group in the molecular structure. Generally, surfactants are divided into two categories- ionic surfactants and non-ionic surfactants...

Tuesday, June 14, 2022

Cationic dye fixing agent mainly through the cation and dye molecules in the anion group formation of ionic bonding, thereby sealing the water-soluble groups, to improve the wet treatment fastness. This kind of fixing agent can be divided into surfactant fixing agent and non-surface...

Tuesday, June 14, 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Tuesday, June 14, 2022

We provide custom made plastic parts-Sliders, inserts, lifters, blocks, ejector pins, and other mold components for our worldwide clients in 3 days via DHL or TNT. We are able to manufacture custom made plastic parts(Mold slider, lifters, Mold inserts, Core and cavity, blocks, ejector...)

Tuesday, June 14, 2022

The dining chairs of northern Europe style has features of aesthetics, durability and are friendly to users. Bent plywood dining chairs are welcome at not only household use, but also commercial use. Each bent plywood dining chair has its own distinctive appearance. The shape design...