ADJUSTABLE - 5583 ads

Friday, September 08, 2017

Price : 500 000,00 €

Introduction: Cooling the cream sandwich to make it strong enough for cutting and packing,cooling the wafer to ensure a clean cut. The capacity of the wafer cooler depends on the performance of the equipment and the cooling time required for the product. The cooling time can be set...

Wednesday, September 06, 2017

Seam Fatigue Tester Testing Standards Toyota TSL5101G Section 3.7,GMW 3405,Nissan M-0154,Ford Motor Co. BN 106-02,TSL5100G Section 4.22 Applications: The Seam Fatigue Tester is a two station bench top machine, used for evaluating fabric or leather seating materials resistance to...

Wednesday, September 06, 2017

Cold Fold Tester ---Chrysler Standards: LP-463-KB-28-01 Method A Applications: This Cold Fold Tester is applied to the cold fold test based on Chrysler method and designed to measure the resistance to cold cracking of the soft trim materials. Product Information: The Cold Fold Tester...

Wednesday, September 06, 2017

Schopper Abrasion Tester Testing Standards: DIN 53863, part 2 , GME Standard 60345, GMW Standard 3283, VW/Audi Zentral-Norm PV 3908 Applications: The Schopper Abrasion Tester is designed for evaluating the abrasion resistance of automotive trim materials under tension using a rotary...

Wednesday, September 06, 2017

Footwear Flection Tester Standards: Satra TM92 & 77 Applications： The Footwear Flection Tester is designed to assess the flexing endurance of completed footwear in wet and dry conditions. Product information： The Footwear Flection Tester is supplied in both single or twin station...

Wednesday, September 06, 2017

Thermal resistance wet resistance tester Testing Standards: GB/T 11048, ISO 11092, ASTM F1868, ASTM D1518, JIS L1096 Application The Thermal resistance wet resistance tester simulates the heat and mass transfer processes which occur next to human skin. Measurement of thermal resistance...

Tuesday, September 05, 2017

Product Model: PTFE hose paste making extruder machine Flow Chart Paster Extrusion tube process: PTFE Fine Powder raw material→Sifting→Mix with solvent→Heating→Preforming→Extrusion→Sin tering→Finished Tube. Matched machine: Machine screening, Mixing machine, Preforming machine, Extruder machine...

Tuesday, September 05, 2017

Melt flow indexer(MFI) are used for military uniforms, canvas, canvas, labor insurance products. The fabric fusing tester is designed for use in the determination of the heat-resistant properties of chemical fiber and blended fabrics to determine the effect of fabric resistance...

Tuesday, September 05, 2017

Vertical & Horizontal Flame Test is a plastics flammability standard released by Underwriters Laboratories of the USA. The UL-94 standard classifies plastics according to how they burn in various orientations and thicknesses. Horizontal Flame Tests： UL-94-HB: slow burning on a...

Tuesday, September 05, 2017

Introduction The electric tracking index test is performed on a surface of a solid insulating material by applying a voltage to a platinum electrode of a predetermined size (2 mm x 5 mm) and dropping a predetermined volume of conductive liquid (0.1% NH 4 Cl) at a predetermined height...

Tuesday, September 05, 2017

The glow wire tester Brief Introduction About the glow wire tester operation instructions according to the GB5169 and GB4706 the design and manufacturing requirements with the standards so called glow wire test method, which apply to the fire danger test on electrical and electronic products...

Tuesday, September 05, 2017

Stone hammer blow testing instrument mainly simulates the actual driving condition of the vehicle, and the individual parts of the vehicle body are often impacted by heavy objects such as sliding material and pavement gravels. Thus, the products are damaged. The product damage degree...

Tuesday, September 05, 2017

Introduction： Multi Finger Scratch/Mar Tester uses tungsten carbide as a scratch to accurately detect surface damage caused by unconventional physical forms (such as scraping, grasping, planning etc). It can be used to detect the wear resistance of plastic parts in automobile interior...

Tuesday, September 05, 2017

Reciprocating abrasion tester Brief Introduction Reciprocating abrasion tester used by way of rotary grinding, using different kinds of friction wheel rotational friction on the sample to detect wear performance for leather and plastic materials, make scientific evaluation of the...

Tuesday, September 05, 2017

Taber abraser(Abrader) consists of a rotary platform to place test specimen, a pair of articulated arms with friction wheel, a motor used to drive the turntable rotation, a counter used to set the rotation number of turntable with the automatic stop function, and a suction device...

Friday, September 01, 2017

Automatic potato chips machine suitable for kinds of potatoes, sweet potatoes, cassavas, carrot, radish etc.This machine not only can cut vegetables into slices, strips and chips, but also can thic kness of potato strips & slices are adjustable(from 0.5-10mm). Automatic potato...

Friday, September 01, 2017

A cone calorimeter is a fire test tool that is based on the amount of heat released during the combustion process directly related to the oxygen consumption in the combustion process. The amount of heat generated is directly proportional to the severity of the fire, such as the rate...

Friday, September 01, 2017

Random Tumble Pilling Tester Standards: ASTM D3512, GB/T 4802.4, ISO 12945.3, JIS L1076-D Applications: Random Tumble Pilling Tester is used to determine the pilling and fuzzing characteristics of textile fabrics. The test specimens with dimensions of 105×105mm are put in the chambers...

Friday, September 01, 2017

Martindale Abrasion And Pilling Tester Testing Standards: ASTM D4970, ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2, ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690, ISO 12947.1/12947.2, M&S P17/P19/P19C, NEXT 18/18a/18b, ISO 5470-2, IWTO-40, JIS L1096 8.17.5 Method E, Woolmark...

Friday, September 01, 2017

Digital bursting strength tester Standards： GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108 Scope of application: Digital bursting strength tester is used for the detection of woven, knitted, non-woven fabrics...

Thursday, August 24, 2017

Technical parameters: Technical parameters MINGTAI LED720 MINGTAI LED520 Illuminance (lux) 160,000 120,000 Color Temperature (Kelvin) 4,300 4,300 Adjustable Color Temperature (Kelvin) (Optional) 3600-5600 3600-5600 Color Rendering Index (CRI) 96 96 Red Color Index (R9) 96 96 Light...

Wednesday, August 23, 2017

Laser Repair Welding Machine for Molds Laser repair welding machine heat affected zone is small, with microscope observation, high precision welding, won't lead to mold shape changes. Product Principle: Laser repair welding machine is by the laser instantaneous generate high-heat...

Wednesday, August 23, 2017

Laser Repair Welding Machine for Molds Laser repair welding machine heat affected zone is small, with microscope observation, high precision welding, won't lead to mold shape changes. Product Principle: Laser repair welding machine is by the laser instantaneous generate high-heat...

Sunday, August 20, 2017

Go-Karting Karting Kart for adults kids Specition Seat size: 35CM*35CM Minimum Length of front Frame: 60CM Max length of front frame: 80 Maximum Load: 150KG The distance of the two handel: 50CM Length of handle: 45CM Seat hight from ground: 18CM Length of the pedal: 15CM Front wheel size...

Thursday, August 17, 2017

Quantity : 1

Single Channel ECG Complete digital and portable design Built-in rechargeable Li-ion battery, AC/DC power supply Auto/Manual work mode select-able Lead-off detection and display Complete digital filtering, resisting baseline drift, AC and EMG interference Baseline automatically adjustable...

Wednesday, August 16, 2017

5 Inch Color TFT Touch screen with adjustable brightness Build-in rechargeable Lithium battery for long-term monitoring Adjustable audible and visual alarms, and sensor off alarm Powerful data storage capacity, power-off data protection Sync with PC-based Software via USB port,...

Wednesday, August 16, 2017

vital signs Monitor (SpO2.PR.NIBP) 2.4" TFT screen , and blue LED digits. Small in size, and easy to carry High resolution color LCD for trend tabular and SPO2 waveform Compact and portable, allowing for uninterrupted monitoring with built-in battery High bright LED display of NIBP...

Wednesday, August 16, 2017

Quantity : 1 set

Saiheng Gas Tunnel Oven Item No.: SH250/400/600/800/1000/1200 Application: Baking gas oven for biscuit. Cake, wafer, cake, cookies, bread. Model: SH250/400/600/800/1000/1200 Capacity: 100/250/500/750/1000/1250KG/HR Certificate: ISO,CE,BV,SGS 》TUNNEL GAS OVEN The oven includes drive drum...

Sunday, August 13, 2017

Quantity : 100 sets/m - Price : negotiable

China Router CNC 2030 Factory From www.eaglecnctec.com Jinan EagleTec CNC Machinery Co.,Ltd.，a professional China CNC Router Manufacturer. Router CNC 2030, also known as 6.5 by 10 feet router cnc machine, is used for machining full sheet material with Max. Size 2000×3000mm. It is...

Sunday, August 13, 2017

Quantity : 100 sets/m - Price : negotiable

Cheap Pneumatic ATC Auto Tool Changer CNC Router for Sale From www.eaglecnctec.com Jinan EagleTec CNC Machinery Co.,Ltd.，a professional China CNC Router Manufacturer. Pneumatic ATC CNC router is an simple type of automatic tool changer cnc router with cheap price. Three different...