BOLT - 2095 ads

Friday, May 31, 2024

DT Fastener provides quality DIN 6915 structural nuts for sale. DIN is the German standard. Its English full name is Deutsches Institut fur Normung. DIN is a registered private association with approximately 6000 industrial companies and organisations as its members. The DIN6915 is...

Friday, May 31, 2024

The DIN 6331/6923/977 flange nuts and the general m18 flange nut are basically the same in size and thread specification, but compared with the m30 flange nut, the gasket and the DIN 6331/din 6923 flange nuts/977 flange nuts are integrated, and there are anti-skid tooth patterns on the bottom...

Friday, May 31, 2024

DIN 557/562 square nut is a steel fastening device screwed on a steel bolt-on on all four sides. The square nut uses a special wrench to tighten and loosen it from the bolt before the hex nut. The DIN 557 square nut/562 square nut can be used for both small fastener applications and...

Friday, May 31, 2024

DIN 314 wing screw nut is easy to install and disassemble, and it can be screwed directly by hand, so some people also call it a hand-tightened nut. Commonly used materials for the production of DIN 314 wing screw nut are 304/316 stainless steel, carbon steel galvanized, nylon 66...

Thursday, May 30, 2024

Price : 1dollar-15dollar

Bucket Wear Products WALKSON provides professional wear solution and a whole set of wear-resistant products. The products including: Chokey wear bars, wear buttons Bimetallic wear plates/liners Ni-hard wear liners/billets Shredder hammer tips/Knife edges These precision cast components...

Thursday, May 30, 2024

Quantity : 2500 piece - Price : 100USD-500USD

Slewing Bearing Without Gear, SWBTEC slewing bearings without gear usually include ball contact type and crossed roller type. Dimension is from 80mm-2500mm, and the material is 50Mn&42CrMo4. A slewing bearing without gear is widely used on many machines too, like rotators, package...

Saturday, May 25, 2024

Introduction A brass eye nut is a fastening component made from brass, an alloy of copper and zinc. Brass hex nuts are used in conjunction with bolts or threaded rods to secure or fasten two or more objects together. Brass nuts, like other brass components, are chosen for their corrosion...

Saturday, May 25, 2024

Quantity : 1000-500K - Price : 0.01-100000usd

At JCL precision metal stamping parts factory, we understand the critical role that precision plays in the success of your products. That's why we proudly offer a wide range of high-performance precision stamped metal parts. We produce precision stamping parts factory with exceptional accuracy...

Saturday, May 25, 2024

Quantity : 1000 tons/ - Price : RMB 10000~90000/ton

Flanges are the interconnected parts between shafts and are used for the connection between pipe ends; they are also used for flanges on the inlet and outlet of equipment for the connection between two equipment. The flange connection or flange joint refers to a detachable connection...

Friday, May 24, 2024

Overview of Custom Titanium (Ti) Bolts Stock for Sale Baoji Yesheng Titanium Industry Co., Ltd. produces custom titanium bolts of various grades and specifications, which are widely used in aerospace, deep sea, military industry, medical equipment, chemical industry and other fields...

Friday, May 24, 2024

Overview of Custom Titanium Bike Frame for Sale A ti bike frame is a bicycle frame made from titanium, a high-performance metal known for its strength, durability, and light weight. Titanium bike frames offer several benefits such as great vibration damping, excellent corrosion resistance...

Friday, May 24, 2024

TITANIUM BAR/ROD FOR SALE TITANIUM BAR/ROD STOCK Titanium bar/rod is a type of titanium product that is widely used in various industries. It is produced by melting and casting titanium scrap and sponge into round bars or rods. Titanium bar/rod is known for its high strength, low weight...

Friday, May 24, 2024

Nuts are essential hardware components that work in tandem with bolts, screws, or other threaded fasteners to create secure connections in various applications. They are typically made from steel, stainless steel, brass, or other durable materials, ensuring strength and longevity...

Thursday, May 23, 2024

Quantity : 500tons - Price : USD0.015-----USD100

A compact magnet system consisting of a steel shell with high permeability and a countersunk magnet is a countersunk pot magnet (also known screw - on pot magnet). The cup magnets with countersunk hole are easy to install. The countersunk cup magnet has a single attraction surface...

Thursday, May 23, 2024

Quantity : 500tons - Price : USD0.015-----USD100

The magnet assembly composed of a U-shaped ferromagnetic iron shell and a rectangular magnet is called channel magnet.It is used as rectangular mounting pot magnet. Depending on the length, countersunk holes will be set in the middle or near both ends of the channel magnet to be screwed...

Wednesday, May 22, 2024

Steering Intermediate Shaft Atlas metal can help you get all the necessary parts at one stop, we can offer steering column intermediate shaft with assembled bolts. Also we can do most surface treatment for your products, like coating, polishing, etc. Features of Universal Intermediate...

Tuesday, May 21, 2024

Quantity : 50000sets/ - Price : 10-500USD/SET

Square type single Nut The Square Nut is finished with a large mounting face paraller to the Nut center. Nut itself has Housing function. This allows for a more compact design compared to Flange type. Stability in the Low-speed Range With this nut, the motor can be connected independently...

Wednesday, May 15, 2024

Quantity : 20 million - Price : 0.06-1 USD/set

Drum lock ring is a reliable sealing component for open head steel drum, open head plastic drum and fibre drum. The plastic drum locking ring and steel drum locking ring seal the drum lid and drum body by hooping them together. Drum locking rings usually vary in diameter, thickness...

Wednesday, May 08, 2024

Tilting bucket widely used in clean up, ditching or grading applications. With 45 degree tilt angle in each directions, tilting bucket give you the versatility to work with leveling and grading without removing the excavator which increase more flexibility and productivity. We offer...

Wednesday, May 01, 2024

Prefab China Steel Frame Warehouse Prefab house for warehouse is a kind of new concept of environmental protection and economic movable house with light steel as the framework, sandwich board as the enclosure material, with standard module series for space integration, members are...

Wednesday, May 01, 2024

Prefab Steel Home Pre built steel homes has all the characteristics of mobile housing, as follows: All components are prefabricated with factory standardization, which is not only convenient for installation and disassembly, but also enrich the layout and function of the movable...

Wednesday, May 01, 2024

Prefab Steel Canteen The pre fabricated steel house for Mess hall is a refinement of the function of the movable products, which can meet the temporary dining needs of the temporary construction camp staff. Since this product mainly uses steel square tubes and C-shaped purlins as...

Wednesday, May 01, 2024

Prefab Agricultural Buildings As a classification of mobile housing products, The Agricultural prefabricated farm shed has been widely used in livestock and poultry sheds, barns, grain, animal feed and other agricultural materials storage. Due to the product mainly steel square tube...

Wednesday, May 01, 2024

Container Office Cabin for Sale The china office container adopts the current international popular container activity room design concept and manufacturing process with the characteristics of standardization, safe and stable structure, and economic flexibility. The container office...

Wednesday, May 01, 2024

Quantity : 50 tons - Price : $18 - $47

Titanium Bolts Wholesale Titanium bolts have the characteristics of low density, high specific strength, good corrosion resistance, low thermal conductivity, non-toxic and non magnetic properties, weldability, good biocompatibility, and strong surface decoration. They are a lightweight...

Tuesday, April 30, 2024

The crimping process of polymer pin type insulators should pay attention to the crimping force, compression amount, pressing speed, holding time, etc. during crimping. Due to the cumulative error of the size of mandrel and fittings, the maximum error can reach 0.2mm. According to experience...

Monday, April 29, 2024

When factory space is at a premium or a temporary site is to be utilized our blasting containers provide an instant and economical solution. Container blasting rooms are based upon standard shipping container sizes which reduce the design and fabrication costs that are normally associated...

Saturday, April 27, 2024

The friction pendulum is composed of steel and friction materials like friction pendulum bearing. The natural vibration period of the upper structure is extended by the relative sliding of the spherical sliding surface. The appropriate radius of curvature of the sliding surface is...

Friday, April 26, 2024

Quantity : 50000 pcs - Price : $20-$50

Static tool holder and driven tool holders are types of tool holder systems used in various machining applications, including milling, turning, and drilling. Static tools analyze code for potential flaws and errors without executing it, while mt driven tools automate the testing process...

Friday, April 19, 2024

Quantity : customized - Price : USD0.1-15

A thread is a continuous helical ridge formed on the inside (nut) or outside (screw) of a cylinder. This ridge is called the crest. Between each crest is a space, called the root. Threads are set at an angle to the axis of the bolt or nut. We provide quality threaded parts. DESCRIPTION...