Raw materials

Brushing Silicone Rubber for Plaster Casting Cornice/Domes

Quantity : 100 ton   Price : 5.8-8.5 usd/kg

Brushable silicone rubber (RTV-2) application:
Production mold casting wax, gypsum, concrete or resins (urethane, polyester, etc.). Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, place could not pour rubber over the above etc. For make a mold by brushing (or spraying) rubber onto the model. Rubber will hold a vertical surface and will reproduce the finest detail brushed onto the model in layers until a suitable thickness is built up. The rubber is allowed to cure and a support shell is applied prior to demold. The advantage of making a mold by brushing rubber onto the model is that it minimizes the amount of rubber used, saving material costs.

Sprayable Rubber for making fast sprayed rubber molds that have the best release properties for production casting of resins, plaster, etc. It is a tin silicone rubber that self-thickens for making concrete Spray able -on molds. Properly applied, mixed 100A: 5B by weight, rubber quickly develops thixotropy when mixed in air. Cured with negligible shrinkage to a durable mold rubber good for production casting resins, foams, concrete, plaster and other materials. Application of a support shell is achieved by spraying over the rubber mold after it has fully cured.

Silicone Putty: Mix & Apply By Hand Silicone putties are two-component, tin-cure silicone putties that can be applied "on-site"--directly to almost any model; Capturing the finest detail and curing within minutes. Silicone Putty has been used to make molds of valuable antiques and archeological models and can be used to make fast molds of sculpture, prototypes, candles, picture frames, coins, etc. Also can cast wax, gypsum and a variety of resins into Putty molds.

The datasheet just for reference, need more information, please feel free to contact us, we can produce silicone follow your request.

Silicone rubber using instruction:
Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of 100g and add 2g curing agent for mixing evenly (silicone rubber and curing agent must be measured accurately). After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. If you don't have vacuum machine, please add 1.2% or 1.5% curing agent so that the bubbles can bubble itself. Since the less curing agent you add, the slower the mould will curdle, the bubbles will bubble out itself.

Location : Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China, 518711 Shenzhen,
Contact : Kelly Yin, 086 755 89948019

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Brushing Silicone Rubber for Plaster Casting Cornice/Domes

Search in a category : Raw materials
Search in a category :
brushing, rubber, casting, domes, plaster, cornice, silicone
Taiwan 318118 Medical
photo not available

Monday, April 26, 2021

Quantity : 1 - Price : 0,10 €

Disposable medical use ureteral stent for Urology ​ Ureteral stent (double pigtail catheter, or double J stent), is widely used in department of urology surgery. It is suitable for renal calculi, ureteral calculi, hydronephrosis, renal transplantation, renal and ureteral benign tumors...

  • 318118 - Shenzhen
  • +86 199 2531 6571
Iran (Islamic Rep) 225400 Second hand goods
PowerCure™ DEAP CAS No. 6175-45-7

Friday, March 22, 2024

2, 2-Diethoxyacetophenone PowerCure™ DEAP is a high-boiling-point liquid effective photoinitiator which is compatible with acrylate monomers and oligomers used in UV-curable coatings, adhesives and inks. It is available in liquid form for ease of formulation and particularly useful...

TinToll Performance Materials Co., Ltd.

  • 225400 - Jiangsu
  • 025 58599930
France 100084 Medical
Thermometer

Thursday, February 01, 2024

Shecare Smart Bluetooth Basal Thermometer Smart Basal Thermometer What thermometer to use for basal body temperature? shecare basal body thermometer with app is a kind of bluetooth basal body thermometer automatically synchronized with the body temperature thermometer app via Bluetooth...

Shecare-ikangtai

  • 100084 - Haidian
  • 86 010 56231097