Bright Annealed Tubes
Similar Products
Heat Exchanger Tubes
100% PMI test, 100% Hydraulic test, 100% inner cleaned by sponge, 100% Dimension test, 100% Surface test.
Special Shaped Tubes
Huashang stainless steel tube size, pipe finishing and material as per request of the customer.
Hexagon Steel Tubing
Large stainless steel tube hexagon steel tube. OD: MAX106.5mm*ID MAX80mm. LENGTH: CUT TO LENGTH.
Product description
Bright Annealed Tubes Description
Bright annealed stainless steel tube is a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree, no deformation and flaring, no cracks flattening, precision bright annealed tube is mainly used to produce pneumatic or hydraulic components, such as air cylinder or gas cylinder. It can be seamless tube, and also welded pipe. The chemical components of precision bright annealed tube are C, Si, Mn, S, P, Cr.
Bright annealed stainless steel tube can be used for industries like automobile, and mechanical parts which have higher requirements for steel pipe precision and surface finish. Bright annealed stainless steel tubes are not only for higher precision and finish requirements, its tolerance can be maintained in 0.02-0.08mm, so many mechanical processing users gradually replace seamless steel tube or round steel with precision bright annealed tube in order to save labor, material, and time.
The traditional annealing approach is performed in a so referred to as open furnace, where the atmospheric oxygen reasons scaling of the heat treated materials, which makes the surface rough. HUASHANG STEEL has developed a one of a kind bright annealing process, the heat treatment is carried out in a so-called closed furnace. The warmth handled materials is covered by means of an inter-fuel atmosphere, which ensures the oxygen cant enter the furnace or come in to contact with the substances and react to shape scale on or tarnish the materials. The surface end is clean, bright and precision, which is a top-notch beginning point for a similar system, like electro-polishing and mechanical polishing.
Especially for the annealed tubing with size greater than 12 meters, the ordinary pickling tube is very hard to clean the internal surface, however, with the bright annealing method, our tubing is much cleaner, smoother on both inner and outer surface. We use bright annealing method, the temperature of the furnace can reach greater than 1350℃, and the tolerance for the putting and real temperature can be controlled Within ±2℃, which is bright annealed stainless' s special advantage, compared with the regular one.
To ensure the quality, all tubes are done 100% PMI, 100% Hydraulic test, 100% inner cleaned by sponge,100% dimension test, and 100% surface test. What is more, our quality of precision drawn tubing is same to precision rolling but has more advantage on price? We are using the advanced cold drawn technology from Japan and Korean, making the close dimension controls. Huashang steel offers discount bright annealed seamless steel pipe used for instrument tubing, chromatography tubing, hydraulic tubing, high-pressure tubing, cleaned tubing, multi-core tubing.
Type Of Tube: Welded tubing and Seamless Tubing
Straight Tubes Bright Annealing Advantages
1. Superior Surface Finish
2. Better Mechanical Property
3. More Precise Dimension
Bright Annealed Tube Sizes
welded tubing size range
OD: 0.19mm--44.5mm, T.W: 0.08mm--3.81mm
Length: CUT TO LENGTH
The seamless straight tubing & bright annealed tubing sizes:
|
OD(mm)*T.W (mm) |
|
4.76×0.51/4.76×0.71/4.76×0.89/4.76×1.24 |
|
6×1/6×1.5 |
|
6.35×0.51/6.35×0.71/6.35×0.89/6.35×1.24/6.35×1.65 |
|
7.94×0.71/7.94×0.89/7.94×1.24/7.94×1.65 |
|
9.53×0.71/9.53×0.89/9.53×1.24/9.53×1.65 |
|
10×1/10×1.5/10×2 |
|
12×1/12×1.5 |
|
12.7×0.71/12.7×0.89/12.7*1.24/12.7×1.65 |
|
15.88×0.71/15.88×0.89/15.88×1.24/15.88×1.65/15.88×2.11 |
|
16×1/16×1.5/16×2 |
|
19.05×1/19.05×1.24/19.05×1.65/19.05×2.11 |
|
25.4×1.24/25.4×1.65/25.4×2.11/25.4×2.54 |
|
31.8×1.24/31.8×1.65/31.8×2.11/31.8×2.54 |
|
38.1×1.24/38.1×1.65/38.1×2.11/38.1×2.54/38.1×3.05 |
Bright Annealed Tubes Materials
Austenitic Stainless Steel:
TP304, TP304L, TP304H, TP304LN, TP316/TP316L, TP316H, TP316Ti, TP316LN, TP321, TP321H,TP317, TP317L, TP347, TP347H, TP310S, TP310H, TP904L, 254Mo. S30432, S31042, N08367
Duplex & Super Duplex Steel: S31500, S32101, S32003, S32304, S31803, S32205, S32750, S32760
Nickel Alloy Steel:
N06600, N06601, N06625, N07718, N08800, N08825, N10276, N04400, N05500, N02200, N02201, N08028, N08810, N08811, N08020, N10624, N10629, N10675
Bright Annealed Tubes Standard
ASTM A789, ASME SA789, EN10216-5, ASTM B163, ASTM B167, ASME SB163, ASME SB167, ASTM B668, ASME SB668, ASTM A269, ASME SB677, ASTM A213, ASME SA213, ASME SA269, ASMT A270, ASTM B622, ASTM B516
Heat Treatment: Bright Annealed
NDT: Eddy Current or Hydraulic test or UT
Chemical Composition of Nickel Alloy, Duplex steel & Austenitic Steel
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
Fe |
Al |
Co |
Zr |
Nb |
Tu |
Va |
|
|
Max |
Max |
Max |
Max |
Max |
|
|
|
|
Max |
Max |
Max |
Max |
Max |
|
|
|
|
|
Nickel Alloy |
||||||||||||||||||
|
Inconel 600/No6600/2.4816 |
0.15 |
0.5 |
1 |
|
0.015 |
14-17 |
≧72 |
|
|
|
0.5 |
6.0-10.0 |
|
|
|
|
|
|
|
Inconel 600/No6601/2.4851 |
0.1 |
0.5 |
1.5 |
|
0.015 |
21-25 |
58-63 |
|
|
|
1 |
|
1.0-1.7 |
|
|
|
|
|
|
Inconel 690/No6690 |
0.05 |
0.5 |
0.5 |
|
0.015 |
27-31 |
58 |
|
|
|
0.5 |
7.0-11.0 |
|
|
|
|
|
|
|
Inconel 625/No6625/2.4856 |
0.1 |
0.5 |
0.5 |
0.015 |
0.015 |
20-23 |
≧58 |
8.0-10.0 |
≦0.4 |
|
|
5 |
≦0.4 |
|
|
3.15-4.15 |
|
|
|
Inconel 718/No7718/2.4668 |
0.08 |
0.35 |
0.35 |
0.015 |
0.015 |
17-21 |
50-55 |
2.8-3.3 |
0.65-1.15 |
0.006 |
0.3 |
Remainder |
0.2-0.8 |
|
|
4.75-5.5 |
|
|
|
Incoloy 800/No8800/1.4876 |
0.1 |
1 |
1.5 |
|
0.015 |
19-23 |
30-35 |
|
0.15-0.6 |
|
0.75 |
≧39.5 |
0.15-0.6 |
|
|
|
|
|
|
Incoloy 800H/No8810/1.4958 |
0.05-0.1 |
1 |
1.5 |
|
0.015 |
19-23 |
30-35 |
|
0.6-1.2 |
|
0.75 |
≧39.5 |
0.15-0.6 |
1 |
|
|
|
|
|
Incoloy 825/No8825/2.4858 |
0.05 |
0.5 |
1 |
|
0.03 |
19.5-23.5 |
38-46 |
2.5-3.5 |
|
|
1.5-3 |
≧22 |
0.2 |
|
|
|
|
|
|
C-276/No10276/2.4819 |
0.01 |
0.08 |
1 |
0.04 |
0.03 |
14.5-16.5 |
<p style="margin-left: 0.0000pt; margin-right: 0.0000p | |||||||||||
Contact : ZHANG LUCY , 86 577 86868069
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Bright Annealed Tubes Search in a category : Medical Search in a category : tubes, annealed, bright |
22440 Stock lotsReport abuse
Tuesday, December 24, 2024
American Samsung Refrigerators
Quantity : 1000 - Price : 590,00 €
Exclusive Offer: Lot of 1000 American Samsung RS68CG882ES9 Refrigerators at Clearance Price! Seize this unique opportunity with a lot of 1000 American Samsung RS 68 CG 88 2E S9 refrigerators at an exceptional clearance price of €590 per unit. This high-end model is perfect for wholesalers looking to offer their customers a product that combines elegant design, advanced technology, and energy efficiency. Key features of the Samsung RS 68 CG 88 2E S9: - Large storage capacity ...
TRANSIDI
- 22440 - PLOUFRAGAN
- 02 30 96 63 26
- 33(0)603670505
201900021 VehiclesReport abuse
Sunday, October 06, 2013
Quantity : 1 set - Price : USD89,000
Mobile LED Display EF22-P10(foldable) Chassis Brand OMDM External dimension(folded) 8030mm x 1600mm x 1800mm Material 16 manganese steel External dimension(unfolded) 8030mm x 3200mm x 1800mm Tire Solid rubber tires Total weight 5860kgs Brake hydraulic braker(manual&impact)...
Shanghai Jingxiang Advertisement Communication Co.,Ltd
- Lillian123
- 201900021 - Shanghai
- 008618001970686
59590 B2B ServicesReport abuse
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
