Equipment goods

Automotive interiors trim fogging tester

Fogging Tester is applicable in fogging test of automotives' interior decoration materials, that will volatilize under higher temperature
Fogging tester can be used to test the fogging of the xenon lights

Fogging Tester conforms to standards of:

ISO 6452
DIN 75201
SAE J1756

Features:

Fit for laboratory running and low noise
Bath temperature control accuracy can reach 0.1 degree Celsius, creating precise testing Conditions
Easy to operate and safe
Worldwide first class components, stable and reliable
Human friendly design
Working Principle:
The main frame of the tester includes a water sink fully filled with specified ethylene glycol, which can reach a high temperature. At the time of testing, leather specimens are put in the six standard glass containers filled with high temperature liquid, and the stainless steel containers are placed above each glass. Relying on the constant water flow distribution, the temperature can maintain at 20℃ constantly, and it can be adjusted through the regulation device connected to the main frame. This controlled environment condition will generate a layer of “fog” on the surface of specimens. The operator can determine the fogging characteristics of materials based on gravimetric analysis method or refraction method.

Test Methods:
It applies to the following test methods:
1) Gloss Method: the sample cup is heated by the fog evaporated gas condensing on cold glass by glass gloss values were compared before and after condensation and calculated, the sample can be drawn into the fog value.
2) Gravimetric method: the sample cup is heated by the fog evaporated gas condensing on cold aluminum foil, aluminum foil condensed by weighing before and after the change in weight, the sample can be drawn from the atomization - the weight of condensate.
3) Haze method: the sample cup is heated by the fog evaporated gas condensing on cold glass, through the haze value before and after the glass condensate compare and calculate, the sample can be drawn into the fog value.

Standards
DIN 75201 Determination of the fogging characteristics of trim materials in the interior of automobiles
ISO 6452 Rubber or plastics coated fabrics-determination of fogging characteristics of trim materials
in the interior of automobiles
SAE J1756 Test procedure to determine the fogging characteristics of interior automotive materials
QB/T 2728 Leather-physical and mechanical test-determination of fogging characteristics.
BS EN 14288 Leather - Physical and mechanical tests - Determination of fogging characteristics
PV 3920 Determination of fog value (F) of non-metallic interior materials
PV 3015 Non-m

Location : No. 2578 Minhang District Gu Dai Road, Shanghai, 201516 Shanghai,
Contact : qian Anna, 021 6780 0179

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Automotive interiors trim fogging tester

Search in a category : Equipment goods
Search in a category :
fogging, trim, tester, interiors, automotive
France 361002 Second hand goods
China Professional Injection Mould

Friday, May 16, 2014

Quantity : 5000sets - Price : $1000-5000/set

Injection Molding Description Description: 1.Mould Base: HASCO, DME, RABUDIN, DIN, JIS, LKM. 2.Mould Core: 718,S136,P20,NAK,LKM,EK4,X13T6W etc. 3.Hot runner: Mold-masters,Master Tip,Husky,Hasco,DME,Yudo,Incoe,Thermopla y etc. 4.Standard Parts: DME,HASCO,NEAREST ANSI STANDARD...

Xiamen Karo Co.,Ltd

Spain 30410 Food
Camel racing Feed

Friday, October 09, 2015

Quantity : MOQ 24T

CAMEL RACE FEED Complete food flaked in addition to volume ration for camel sport in intense and medium work. Amount of 0.5 - 1.5 kg feed per 100 Kg of weight, depending on the age, size and activity of the camel. Allocate at least 3 daily rations, in addition to good forage and...

Agrofood Ganados

  • 30410 - Murcia
  • +34 9 68 10 66 28
  • +34 6 72 36 35 29
Thailand 10400 Cosmetics and beauty
Quality A4, A3 Office Copy Papers, 80gsm, 75gsm, 70gsm

Saturday, July 18, 2015

Especificaciones: Tamaño de hoja: 210mm x 297mm, Internacional A4 Calidad: 100% importado de pulpa de madera virgen Blancura = 102-104%, blanco natural Capacidad: Copying100ppm alta velocidad, Laser Capaz, Especificaciones de chorro: Tamaño de hoja: 210mm x 297mm, Internacional A4 Calidad...

PAPERY (THAILAND )CO LTD

  • 10400 - Bangkok
  • 098765443533