Automatic Dewaxing Autoclave
Dewaxing Autoclave is special designed for removing the wax patterns in the ceramic shell.
Features
·Integrated Chambers
Designed as integration with the steam generator and dewaxing chamber to save space. The dewaxing chamber is always under a high temperature condition with a short pressure balance time between the double chambers when the high-temperature steam enters into inner side, and also decreasing moisture content in the drained wax.
·Advanced Control
With PLC control system to ensure the logical interlock of temperature, pressure, water level, steam in, dwell, steam out and door operation can be controlled automatically except closing/opening door and placing in/out shell clusters. And also features with water feeding and stopping automatically, a sound-light alarm for the high-low water level and contactless heating. Heat recovering unit can be supplied for saving energy with additional cost.
·Good Safety Performance
This machine complies with all the safety regulations of pressure vessel. It features with seven safeguards including temperature safety control, pressure safety control, safety valve protection, no steam delivering without door-closing in place, the door is unable to open if there is any residual pressure in the chamber, no steam in when the inner air release valve opens, residual pressure protection of autoclave door. There is an obvious safety warning board in front of the operating door.
·High-grade Configuration
The key control components are all imported products or supplied by joint venture. And the key valve is imported from UK.
·Energy saving and environment friendly
The outside cover of autoclave is made of new thermal insulation material with a lower heat-contacting coefficient, good thermal barrier effect and decreasing the fuel consumption.
·Attractive Appearance
Besides the quality, we also pay special attention to the appearance design and surface treatment for our machines with the characters of reasonable process, advanced technology, beautiful appearance and fluent colors.
Specifications
Model |
YT-DRTF800 |
YT-DRTF1000 |
YT-DRTF1200 |
YT-DRTF1400 |
Inside dimension |
Φ800×1200mm |
Φ1000×1200mm |
Φ1200×1500mm |
Φ1400×1600mm |
Inside material |
Carbon steel or SS304/316L |
Carbon steel or SS304/316L |
Carbon steel or SS304/316L |
Carbon steel or SS304/316L |
Working temperature |
≤179℃ |
≤179℃ |
≤179℃ |
≤179℃ |
Design pressure |
1.0 MPa |
1.0 MPa |
1.0 MPa |
1.0 MPa |
Dwell time |
0~60min (adjustable) |
0~60min (adjustable) |
0~60min (adjustable) |
0~60min (adjustable) |
Note: We can design the special machines according to the customer's requirements.
The Automatic Dewaxing Autoclave can fit with an Energy Recovery System with additional cost.
Contact : Ma Fiorina, 00863358015998
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of Automatic Dewaxing Autoclave Search in a category : Equipment goods Search in a category : automatic, autoclave, dewaxing |
Thursday, December 12, 2024
▲VE-30RFM RX (Front / Rear) ▲VE-30RFM TX (Front / Rear) VE-30RFM HDMI to RF Matrix Extender is designed to convert HDMI signal to HD digital TV signal based on DVB-T CATV signal, it uses 64QAM mode to realize the HD digital TV signal conversion and transmit via coaxial cables for...
Meicheng Audio Video Co., Ltd.
- meicheng
- 23511 - New Taipei City
- 886 2 82280311
Friday, December 20, 2024
Quantity : 40000
Tunisian manufacturer specializing in the development and manufacture of the Fouta, the famous towel originally used in the steam room, we offer a wide range of products and a variety of colors and patterns you are offered, declining to 0.5 in all sizes x0.7m, 0.7x1.3m, 1x2m, 1.6x2...
ALL BY FOUTA
- Artisanat Tunisien
- 34430 - ST JEAN DE VEDAS
- 09 67 35 32 60
- 06 38 79 57 70
Thursday, October 03, 2019
Price : 56 €/m²
modular metal building all sizes, temporary or permanent. Buildings in extensible and fully removable kit. main metal structure composed of profiles type "C" or "SIGMA" cold formed and galvanized secondary structure on coverage and facade perimeter composed of profiles like "Z" cold...
HADDOUCHE
- 33140 - CADAUJAC
- 06 72 47 36 41
- +33 6 72 47 36 41