Algomtl
svgfair.com
 
Auto Parts Corrosive Salt Spray Chamber
Details
China Equipment goods
Equipment goods

Auto Parts Corrosive Salt Spray Chamber

Quantity : 34   Price : 2 342,00 €

Salt spray test machine.are for the surface treatment of a variety of materials.including quality paint.electroplating.organic and inorganic coating, anodizing.corrosion rust treatment tests were carried out to determine the corrosion of time .
Salt Fog Corrosion Test/Technical parameters:
Model: SH-800
Test Standard: NSS, ACSS CASS
Test temperature: 35 about 1 celsius degree or50 about 1 celsius degree
Internal Dimensions: 160*100*50 (W*D*H) cm
Dimensions: 230*120*150 (W*D*H) cm
1 . PVC plate entire mining system.the internal use of advanced three-dimensional reinforcement ring with technology.strong structure, solid.never deformation.
2 . Laboratory with five heating surface heating method can really grasp the average temperature of the test chamber (about 0.1 celsius degree)
3 . Nozzle: Bo Nute Theorem draw salt water spray, fog will make the diffusion rate is doubled, and naturally fall on the specimen.the difference may be controlled falling mist about 0.3ml/80c m h.
4 . Saturated air with Henry's law, be heated humidification, and provide the necessary laboratory humidity.
5. Temperature directly affects the corrosion rate of the conditions precedent.the Company adopted the approach of PID temperature controllers, control error within about 0.5 celsius degree.
6. The only warning devices using low test solution.the test solution when only enough for 5 hours and then spray the buzzer will notify users supplement to ensure the continuous spray test .
7.taken full detection system.when a fault occurs.the fault indicator lights automatically shut down.
Water Spray Test Equipment/Routine maintenance:
1.before using salt spray test machine.the first row of the fog to consider installing the pipe, preferably with a straight wall exhaust pipe through the wall to avoid the indoor salt spray corrosion damaging other equipment.bending too much, too fog effects will affect the row.there will be pressure to produce laboratory.affect the test results.
2, add salt to be careful.not too fierce.saline into the control panel.can cause corrosion and electrical control system instrumentation shorted.causing an accident.
3.over-temperature alarm, please immediately notify the manufacturer to send technical personnel to repair.without delay. Otherwise, burn the box.or electronic control systems.causing an accident.
4.the laboratory should periodically clean up the drainage of water.not a long-term clean-up.water in the salt content will be more and more concentrated.have a corrosive effect on the heat pipe heat pipe will reduce the life .
5.please adjust the size of the spray volume to achieve spray tower.non-adjustable pressure valve.
6.the machine's transparent panel cover and superstructure unavailable corrosive solvent scrubbing.
7.glass filters and protective glass nozzle ( must not use needles or any hard object to sparsely -pass filter or nozzle ) .
8.the end of each test or test solution standard measuring cup should be drained and cleaned in a timely manner in order to avoid accumulation of crystals of salt solution.the impact of settlement calculations.
9.it is recommended to clean equipment regularly test box ( including: spray chamber.a salt solution chamber.preheat tank and sealed tank ) to keep clean equipment.
Location : JinHui Industrial Park,LiXin town,East, 523000 DongGuan,
Contact : Rachel Lee, 0086 769 23164266

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Auto Parts Corrosive Salt Spray Chamber

Search in a category : Equipment goods
Search in a category :
auto, chamber, spray, salt, parts, corrosive
France 75015 Environment / Ecology
Projecteur LED solaire - Série WARRIOR RGB - 800 Watts - Angle 180° - Lampe 38,5 x 30...

Friday, December 24, 2021

France Vision Distribution spécialiste de l'import / export, déstockage et produits High-tech. Nous proposons une large gamme de produits a forte demande, contactez nous et visitez notre site internet pour plus d'informations. Site : www.france-vision-distribution.com Téléphone :...

France Vision Distribution

  • 75015 - Paris
  • 09 74 55 07 59
France 467000 Raw materials
GRAPHITE PLATE FOR SALE

Saturday, July 09, 2022

Quantity : 30000TONS - Price : 1-20USD/KG

GRAPHITE PLATE FOR SALE With the development of modern science and technology and industry, carbon china graphite plate has become an indispensable industrial product, and its application is more and more extensive. Graphite plate is a material with electrical conductivity, high temperature...

Pingdingshan Wanhui Graphite Co., LTD

  • 467000 - Pingdingshan
  • 0375 6506966
  • 86 15539792960
Hong Kong 86 Electronics / Computers
High Capacity Battery Pack for E-Bikes 24V11ah E-Bike Battery Whitebait Type Battery Pack

Friday, January 06, 2017

Quantity : 100pcs - Price : USD$117

Advantage 1.High invert efficiency and rapid start; 2.Great physical performance; 3.Low self-discharge rate; 4.Reasonable price; 5.Professional Li-battery customization. No Item Parameter Remark 1 Rating Voltage 24 V 2 Rating Capacity 11Ah Customized 3 Minimum Capacity 10...

Shenzhen Believe Technology Co.,Ltd

  • 86 - BaoAn District
  • 008613590311520
 
Secure payment

Information

Top search