Algomtl
 
ASTM A335 P9 seamless alloy steel pipe
Details
China Raw materials
Raw materials

ASTM A335 P9 seamless alloy steel pipe

Quantity : 1000   Price : 1 000,00 €

ASME SA335 P9,ASTM A335,ASTM A335 P9,High pressure boiler , ASTM A335 P9 seamless alloy steel pipe
ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
ASTM A335 P9 alloy steel pipe
The range of ASTM A335 P9 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The range of ASTM A335 P9 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
The different mechanical test requirements for , namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Outer Dimensions: 19.05mm - 114.3mm
Wall Thickness: 2.0mm- 14 mm
Length: max 16000mm
Steel grade: ASTM A335 P9
Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
ASTM A335 P9 Chemical Compositions(%)
Compositions Data
UNS Designa-tion K41545
Carbon(max.) 0.15
Manganese 0.30-0.60
Phosphorus(max.) 0.025
Silicon(max.) 0.50
Chromium 4.00-6.00
Molybdenum 0.45-0.65
Other Elements …
Mechanical properties for ASTM A335 P9
Properties Data
Tensile strength, min, (MPa) 415 Mpa
Yield strength, min, (MPa) 205 Mpa
Elongation, min, (%), L/T 30/20
Material & Manufacture
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.
Heat Treatment
  • A / N+T
  • N+T / Q+T
  • N+T
Mechanical Tests Specified
  • Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
  • For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
  • For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.
Notes for Bend Test:
  • For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
  • Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
  • The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

Location : Carretera Siping, Shanghai, 200081, China, Shanghai 闸北,
Contact : Sum Xuu, 862133780199

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
ASTM A335 P9 seamless alloy steel pipe

Search in a category : Raw materials
Search in a category :
seamless, pipe, steel, a335, astm, alloy
France Tianhe B2B Services
KITCHEN CABINETS CHINA

Friday, November 18, 2022

Base on your requirement, HOLIKE would like to offer the most suitable solution of kitchen cabinets china made in China with different colors, styles, shapes, sizes, materials. Except for the Kitchen cabinets, HOLIKE are matching with the necessary hardware and other accessories....

HOLIKE CREATIVE HOME Co.,Ltd

  • 510665 - Tian
  • 86 20 89311964
  • No 18 Keyun Road, Tianhe distric
Hong Kong 86 Electronics / Computers
New Design E-Biek 36V11Ah Original Li-ion 18650 Lithium Battery Pack

Thursday, December 08, 2016

Quantity : 100pcs - Price : $129

Advantage 1.High invert efficiency and rapid start; 2.Great physical performance; 3.Low self-discharge rate; 4.Reasonable price; 5.Professional Li-battery customization. No Item Condition Specification 1 /capability /Capacity 12Ah /Minimum Capacity 11.5Ah 2 /Rating Voltage 36±0...

Shenzhen Believe Technology Co.,Ltd

  • 86 - BaoAn District
  • 008613590311520
Australia 6021 Everything else / Bulk
Sustainable Packaging

Thursday, October 13, 2022

Price : 1-10usd

Check out our variety of eco packaging solutions. All of which can be completely customised to suit your ideal brand image. The benefits of sustainable packaging are endless, it reduces single use materials and promotes recyclability, diverts waste from landfill and creates a sustainable...

Myerton Packaging Pty Ltd

  • 6021 - Australia
  • 1300089850
 
Secure payment

Information

Top search