ASTM A335 P9 seamless alloy steel pipe
Quantity : 1000 Price : 1 000,00 €
ASME SA335 P9,ASTM A335,ASTM A335 P9,High pressure boiler , ASTM A335 P9 seamless alloy steel pipe
ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
ASTM A335 P9 alloy steel pipe
The range of ASTM A335 P9 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The range of ASTM A335 P9 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
The different mechanical test requirements for , namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Outer Dimensions: 19.05mm - 114.3mm
Wall Thickness: 2.0mm- 14 mm
Length: max 16000mm
Steel grade: ASTM A335 P9
Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
ASTM A335 P9 Chemical Compositions(%)
| Compositions | Data |
| UNS Designa-tion | K41545 |
| Carbon(max.) | 0.15 |
| Manganese | 0.30-0.60 |
| Phosphorus(max.) | 0.025 |
| Silicon(max.) | 0.50 |
| Chromium | 4.00-6.00 |
| Molybdenum | 0.45-0.65 |
| Other Elements | … |
Mechanical properties for ASTM A335 P9
| Properties | Data |
| Tensile strength, min, (MPa) | 415 Mpa |
| Yield strength, min, (MPa) | 205 Mpa |
| Elongation, min, (%), L/T | 30/20 |
Material & Manufacture
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.Heat Treatment
- A / N+T
- N+T / Q+T
- N+T
Mechanical Tests Specified
- Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
- For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
- For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.
Notes for Bend Test:
- For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
- Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
- The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.
Location : Carretera Siping, Shanghai, 200081, China, Shanghai 闸北,
Contact : Sum Xuu, 862133780199
Contact : Sum Xuu, 862133780199
Good deal: buying from seller
Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of ASTM A335 P9 seamless alloy steel pipe Search in a category : Raw materials Search in a category : astm, steel, alloy, pipe, a335, seamless |
France 
347650 Craft
347650 CraftReport abuse
Saturday, July 27, 2024
Ningbo Xiaoerma Bearing Co., Ltd. es un fabricante profesional de rodamientos rígidos de bolas de la serie 6000 en China y una fábrica de rodamientos rígidos de bolas de la serie 6000. Con artesanía, equipos avanzados, métodos de prueba integrales y un equipo de desarrollo técnico...
Ningbo Xiaoerma Bearing Co., Ltd.
- Ningboxiaoerma
- 230980 - hefei
- +86 13456132221
Australia 
6021 Everything else / Bulk
6021 Everything else / BulkReport abuse
Thursday, October 13, 2022
Price : 1-10usd
Check out our variety of eco packaging solutions. All of which can be completely customised to suit your ideal brand image. The benefits of sustainable packaging are endless, it reduces single use materials and promotes recyclability, diverts waste from landfill and creates a sustainable...
Myerton Packaging Pty Ltd
- 6021 - Australia
- 1300089850
Taiwan 
330 Electronics / Computers
330 Electronics / ComputersReport abuse
Wednesday, October 21, 2020
Shining Jins specializing in manufacturing & designing cold forge Pole piece (T-Yoke) for Loud-Speakers and alarms raw driver in Taiwan. Areas of Application: Home audio loudspeakers driver Neodymium Sub-Woofer dirver P.A. loudspeakers driver Car loudspeakers driver Neodymium...
Shining Jins Enterprise Co., Ltd.
- jsicyoke
- 330 - Taoyuan City
- +88 6 33 61 06 38
