Algomtl
welchome-fair.com
 
ASTM A335 P92 High pressure boiler pipes
Details
China Raw materials
Raw materials

ASTM A335 P92 High pressure boiler pipes

Quantity : 1000   Price : 1 000,00 €

ASME SA335 P92,ASTM A335,ASTM A335 P92,High pressure boiler pipes

ASTM A335 P92 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
ASTM A335 P92 alloy steel pipe
ASTM A335 P92 high pressure semaless boiler pipe, The range of ASTM A335 P92 seamless alloy steel pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The range of ASTM A335 P92 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
  • Outer Dimensions: 19.05mm - 114.3mm
  • Wall Thickness: 2.0mm-14 mm
  • Length: max 16000mm
Steel grade: ASTM A335 P92
Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Chemical Requirements of ASTM A335 P92
UNS Designation K92460
Carbon 0.07–0.13
Manganese 0.30–0.60
Phosphorus(max) 0.02
Sulfur(max) 0.01
Silicon 0.50 max
Chromium 8.50–9.50
Molybdenum 0.30–0.60
V 0.15-0.25
N 0.03-0.07
Ni (max) 0.4
Al(max) 0.02
Cb 0.04-0.09
W 1.5-2.00
B 0.001-0.006
Ti (max) 0.01
Zr(max) 0.01
Mechanical Properties of ASTM A335 P92
Properties Data
Tensile strength, min, (MPa) 620
Yield strength, min, (MPa) 440
Elongation, min, (%), L/T 20/…
Material & Manufacture
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.
Heat Treatment
  • A / N+T
  • N+T / Q+T
  • N+T
Mechanical Tests Specified
  • Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
  • For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
  • For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.
Notes for Bend Test:
  • For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
  • Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
  • The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

Location : Carretera Siping, Shanghai, 200081, China, Shanghai 闸北,
Contact : Sum Xuu, 862133780199

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
ASTM A335 P92 High pressure boiler pipes

Search in a category : Raw materials
Search in a category :
pressure, boiler, pipes, high, a335, astm
France 214000 Everything else / Bulk
20′ HC (HIGH CUBE)

Saturday, April 27, 2024

Price : 1000usd

The 20' HC (20 container cube) Container is designed with extra vertical space, offering enhanced capacity for the transportation and storage of tall cargo. With its higher ceiling height compared to standard containers, it accommodates oversized items more efficiently. This container...

WFH SG GROUP PTE LTD

  • 225400 - xinjiapo
  • 65 68185733
France 400000 Equipment goods
Hydraulic Oil Filtration Cleaning Equipment

Saturday, August 26, 2017

VHF Hydraulic Oil Filtration Machine from Acore Filtration Co. Ltd adopts advanced technology, innovative design, 304 stainless steel materials, Germany pumps, filter and electrics. Pipeline connection use special aviation stainless steel Mechanical seal. Hydraulic oil filtration...

Acore Oil Filtration Co. Ltd

  • 400000 - Chongqing
  • +8613206063693
India 411012. Everything else / Bulk
Used LPGBobtail and truck tank

Wednesday, August 07, 2019

Price : 30000USD

Used LPG Bobtail and truck tank, LPG Truck tank, Used LPG Bobtail, LPG Bobtails, LPG Bobtail & truck tank, LPG Gas Storage Bobtail, LPG Semitrailer, and LPG Transport Tankare provided with all accessories like safety fittings, valves, pipelines, Excess flow valves, internal...

UsedLPG storage tank

  • 411012. - Dapodi,Pune-411012.
  • +912067113030
 
Secure payment

Information

Top search