Algomtl
svgfair.com
 
ASTM A335 P92 High pressure boiler pipes
Details
China Raw materials
Raw materials

ASTM A335 P92 High pressure boiler pipes

Quantity : 1000   Price : 1 000,00 €

ASME SA335 P92,ASTM A335,ASTM A335 P92,High pressure boiler pipes

ASTM A335 P92 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
ASTM A335 P92 alloy steel pipe
ASTM A335 P92 high pressure semaless boiler pipe, The range of ASTM A335 P92 seamless alloy steel pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The range of ASTM A335 P92 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
  • Outer Dimensions: 19.05mm - 114.3mm
  • Wall Thickness: 2.0mm-14 mm
  • Length: max 16000mm
Steel grade: ASTM A335 P92
Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Chemical Requirements of ASTM A335 P92
UNS Designation K92460
Carbon 0.07–0.13
Manganese 0.30–0.60
Phosphorus(max) 0.02
Sulfur(max) 0.01
Silicon 0.50 max
Chromium 8.50–9.50
Molybdenum 0.30–0.60
V 0.15-0.25
N 0.03-0.07
Ni (max) 0.4
Al(max) 0.02
Cb 0.04-0.09
W 1.5-2.00
B 0.001-0.006
Ti (max) 0.01
Zr(max) 0.01
Mechanical Properties of ASTM A335 P92
Properties Data
Tensile strength, min, (MPa) 620
Yield strength, min, (MPa) 440
Elongation, min, (%), L/T 20/…
Material & Manufacture
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.
Heat Treatment
  • A / N+T
  • N+T / Q+T
  • N+T
Mechanical Tests Specified
  • Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
  • For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
  • For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.
Notes for Bend Test:
  • For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
  • Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
  • The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

Location : Carretera Siping, Shanghai, 200081, China, Shanghai 闸北,
Contact : Sum Xuu, 862133780199

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
ASTM A335 P92 High pressure boiler pipes

Search in a category : Raw materials
Search in a category :
a335, pressure, boiler, pipes, high, astm
France 201615 Everything else / Bulk
TTA27: 1,2:5,6-Diepoxyhexahydro-4,7-methanoindan Cas 81-21-0

Friday, May 31, 2024

Price : $12~15/kg

TTA27 (dicyclopentadiene epoxide) is a typical cycloaliphatic epoxy resin. Its molecular structure is characterized by a close bicyclic structure between two epoxy groups and a stable methylene bridge across the six-membered ring. Therefore, the cured product of TTA27 has the characteristics...

Jiangsu Tetra New Material Technology Co., Ltd.

  • 201615 - Songjiang
  • 0086 2154265697
Egypt 045 Food
Gouda Cheese

Monday, May 08, 2017

one of our clients "Al-Wady Al-Akhdar"Dealing in producing and exporting Gouda Cheese. Gouda Cheese called Semi-hard cheese We are using the best types of raw milk for making Gouda Cheese. The humidity ranges between 40 - 50% - We can also packing according to customer specification required...

Behira International Trade Point (BITP)

  • 045 - Damanhour
  • +20 4 53 33 18 99
Hong Kong 116000 B2B Services
1qc slide gate plate high density

Thursday, December 20, 2018

In order to adapt to different ladle and different production environment, our company has improved the deficiency of traditional sliding mechanism and formed our unique sliding mechanism series and related supporting products based on the actual situation on site Location : 403, D-5 Building...

LIAONING MINERAL & METALLURGY GROUP CO., LTD

  • 116000 - Dalian
  • +8641182557586
 
Secure payment

Information

Top search