ASTM A335 P91 High pressure boiler pipes
Quantity : 1000 Price : 1 000,00 €
ASTM A335 P91 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
ASTM A335 P91 alloy steel pipe
ASTM A335 P91 high pressure semaless boiler pipe, The range of ASTM A335 P91 seamless alloy steel pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The range of ASTM A335 P91 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Outer Dimensions: 19.05mm - 114.3mm
Wall Thickness: 2.0mm - 14 mm
Length: max 16000mm
Steel grade: ASTM A335 P91
Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
ASTM A335 P91 Chemical Compositions(%)
| Compositions | Data |
| UNS Designa-tion | K91560 |
| Carbon(max.) | 0.08-0.12 |
| Manganese | 0.30-0.60 |
| Phosphorus(max.) | 0.025 |
| Silicon(max.) | 0.50 |
| Chromium | 4.00-6.00 |
| Molybdenum | 0.45-0.65 |
| Other Elements | … |
Mechanical properties for ASTM A335 P91
| Properties | Data |
| Tensile strength, min, (MPa) | 415 Mpa |
| Yield strength, min, (MPa) | 205 Mpa |
| Elongation, min, (%), L/T | 30/20 |
Material & Manufacture
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.Heat Treatment
- A / N+T
- N+T / Q+T
- N+T
Mechanical Tests Specified
- Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
- For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
- For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.
Notes for Bend Test:
- For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
- Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
- The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.
Location : Carretera Siping, Shanghai, 200081, China, Shanghai 闸北,
Contact : Sum Xuu, 862133780199
Contact : Sum Xuu, 862133780199
Good deal: buying from seller
Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of ASTM A335 P91 High pressure boiler pipes Search in a category : Raw materials Search in a category : a335, pressure, high, boiler, pipes, astm |
France 
100084 Medical
100084 MedicalReport abuse
Thursday, February 01, 2024
Shecare high accuracy thermometer also known as high precision thermometer lasts for more than 16-20 days. This is a non-Bluetooth basic thermometer. Please manually enter the basal body temperature value into the App. This kind of high precision thermometer meets the requirements...
Shecare-ikangtai
- 100084 - Haidian
- 86 010 56231097
Indonesia 
60261 Electronics / Computers
60261 Electronics / ComputersReport abuse
Thursday, July 02, 2020
Need more quantities? please submit an inquiry Condition: New product Kyocera KJ4A-TA UV Inkjet Printheads Series is designed for UV-curable inks or other high viscosity inks. It is optimal for Label/Packaging, Sign Graphics, Offset Surprint and others. Location : Jl. Kedungsari No...
salesignsupply
- 60261 - Kota SBY
- 62 0315921236
France 201615 Everything else / Bulk
201615 Everything else / BulkReport abuse
Friday, May 31, 2024
Price : $12~15/kg
TTA27 (dicyclopentadiene epoxide) is a typical cycloaliphatic epoxy resin. Its molecular structure is characterized by a close bicyclic structure between two epoxy groups and a stable methylene bridge across the six-membered ring. Therefore, the cured product of TTA27 has the characteristics...
Jiangsu Tetra New Material Technology Co., Ltd.
- 201615 - Songjiang
- 0086 2154265697
