ASTM A335 P91 High pressure boiler pipes
Details
China Raw materials
Raw materials

ASTM A335 P91 High pressure boiler pipes

Quantity : 1000   Price : 1 000,00 €

ASTM A335 P91 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
ASTM A335 P91 alloy steel pipe
ASTM A335 P91 high pressure semaless boiler pipe, The range of ASTM A335 P91 seamless alloy steel pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The range of ASTM A335 P91 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Outer Dimensions: 19.05mm - 114.3mm
Wall Thickness: 2.0mm - 14 mm
Length: max 16000mm
Steel grade: ASTM A335 P91
Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
ASTM A335 P91 Chemical Compositions(%)
Compositions Data
UNS Designa-tion K91560
Carbon(max.) 0.08-0.12
Manganese 0.30-0.60
Phosphorus(max.) 0.025
Silicon(max.) 0.50
Chromium 4.00-6.00
Molybdenum 0.45-0.65
Other Elements …
Mechanical properties for ASTM A335 P91
Properties Data
Tensile strength, min, (MPa) 415 Mpa
Yield strength, min, (MPa) 205 Mpa
Elongation, min, (%), L/T 30/20
Material & Manufacture
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.
Heat Treatment
  • A / N+T
  • N+T / Q+T
  • N+T
Mechanical Tests Specified
  • Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
  • For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
  • For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.
Notes for Bend Test:
  • For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
  • Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
  • The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

Location : Carretera Siping, Shanghai, 200081, China, Shanghai 闸北,
Contact : Sum Xuu, 862133780199

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
ASTM A335 P91 High pressure boiler pipes

Search in a category : Raw materials
Search in a category :
pipes, a335, astm, high, pressure, boiler
France - Réunion 20000 B2B Services
photo not available

Tuesday, January 08, 2019

- Automatic Carton Box Print & Gluing Machine - Shanghai Jinchang Carton Machinery Manufacture Co., Ltd is a famous China carton gluing machine Manufacturers and Box Gluing Machinery suppliers,our company was founded in 2000.It covers an area of nearly 20,000 square meters, among which...

tincturers

  • 345100 - Shanghai
  • 0086 021 31766187
Vietnam 700000 Furnitures
Folding Rectangular Stainless Steel Table

Wednesday, January 04, 2017

Quantity : 250 pcs

Stainless steel is an alloy of iron contain minimum 10% chromium. It is less discolored and corrosive than other ordinary steel. Beside Stainless steel is also: - High hard and durability - Tough at low temperature. - High flexibility. Having many major advantages characteristic...

Qui Phuc Company Limited

  • Luck06
  • 700000 - Ho Chi Minh
  • +84 9 86 58 28 62
France 467000 B2B Services
QUARTZ GRAPHITE CRUCIBLE

Saturday, September 10, 2022

Small graphite crucible works best with a quartz jacket because graphite oxidizes. high purity graphite crucible is good or bad with its material and density. Good graphite crucible doesn't oxidizes easily, so that the production loss is low. Bad graphite oxidation is not uniform...

Pingdingshan Wanhui Graphite Co., LTD

  • 467000 - Pingdingshan
  • 0375 6506966
  • 86 15539792960