Anionic Flocculants

SINOFLOC anionic flocculant are co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative charges, and thus anionic active character, in aqueous solution. Our anionic powder polyacrylamide is available in solid powder and emulsion forms.

Anionic Polyacrylamide (anionic PAM) Specifications:

Anionic polyacrylamide msds above is only a brief indtroduction. For more details, please contact us.

Products Feeding:

The solutions of SINOFLOC anionic polymers must be prepared in suitable plants equipped with dry powder feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC anionic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a "maturation" time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on anionic polymer, please consult with SINOFLOC team.