CEMENTING - 196 ads

Saturday, November 27, 2021

Cement Baskets consists of flexible steel spring bow welded to slip-on collars. Bows are hardened and tempered for maximum strength and uniformity. It is run on casing or liners above weak or porous formations to provide protection from hydrostatic pressure generated by the cement column...

Saturday, November 27, 2021

Casing head is a kind of new product which is designed according to customers' requirements and applied in all deep wells and completion operation. lt is mainly used to fix wellhead connect casing string and seal, and control the pressure of casing annular space. The casing head assembly...

Saturday, November 27, 2021

Saigao casing circulating swage is forged from high-grade steel materials and machined to the required specifications. After heat treatment and non-destructive testing, it is confirmed that the product is free of any defects. It can be connected to a square drill pipe to circulate mud...

Saturday, November 27, 2021

Choke Manifold control and implementation of oil and gas pressure control technology. In case that the BOP is off, the pressure at the bottom of well shall be kept higher than formation pressure through controlling casing pressure with choke valve on-off. Additionally, soft shut in...

Saturday, November 27, 2021

Cementing manifold is used to control the cement fluid from cementing pump and transform the cement fluid to wellhead and accomplish cementing operation finally.Valve use plug valves which is in low open torque and operated flexibly under room temperature environment and low temperature...

Saturday, November 27, 2021

Cementing is an important task in the drilling process. In drilling operations, there must be at least two cementing (production wells) and up to 4 to 5 cementing (deep exploration wells). The top cementing is the surface casing cementing, which plays the role of "mud passage, oil...

Saturday, November 27, 2021

Saigao Rubber plug used to separate the cement slurry from other fluids, reducing contamination and maintaining predictable slurry performance. Two types of cement plug are typically used on a cementing operation. The bottom plug is launched ahead of the cement slurry to minimize...

Saturday, November 27, 2021

Cementing Head used in the oilfield is designed to hold a cementing plug before it is pumped down the casing during the cementing operation. In most operations, a bottom plug is launched before the spacer or cement slurry. The top plug is released from the cement Head after the spacer fluid...

Wednesday, September 29, 2021

Price : 100USD

BRD Optical was founded in 2004, and is located in the city of Changchun-the optic base of China with a beautiful view and profound optical culture. We have state-of-the-art, modern technology machines for manufacturing and inspecting all kinds of precision optics. Our company occupies...

Wednesday, September 29, 2021

Price : 100USD

BRD Optical was founded in 2004, and is located in the city of Changchun-the optic base of China with a beautiful view and profound optical culture. We have state-of-the-art, modern technology machines for manufacturing and inspecting all kinds of precision optics. Our company occupies...

Wednesday, August 25, 2021

Quantity : 500000tons - Price : $5-$200000

Mud Pump Liner The pump liner are used as spare parts at mud pump from oil well, providing the operation in liner-piston-piston rod assembly. Working medium: drilling mud, water, other fluids with similar characteristics. SAIGAO GROUP is a professional oil equipment suppliers, we...

Wednesday, August 25, 2021

Quantity : 500000tons - Price : $5-$200000

Mud Pump Crosshead is manufactured from high quality, cast steel and the guides are manufactured from a quality manganese bronze normally used in bearings. This combination of materials provides a low friction interface and generates very little heat, which indicates no friction,...

Wednesday, August 25, 2021

Quantity : 500000tons - Price : $5-$200000

Mud Pump is also a popular concept of a wide range of pumps. Different regions, habits, and ultimately the pump type will not be the same. The mud pump described in this entry is a pump type in most sense: Applied mud pumps in the field of oil drilling. In fact, some non-clean water...

Wednesday, August 25, 2021

Quantity : 500000tons - Price : $5-$200000

Purpose of marine standpipe manifold in the process of blowout control and implementation of oil and gas pressure control technology, it can be used to prevent blowout and protect wellhead. To kill the well (inject fall slurry compulsively); To avoid the risk of fire (inject pure...)

Saturday, July 10, 2021

Products in Detail: YTXN-150 electrical pressure gauge is mainly used in oil drilling, cementing, fracturing equipment. This type of pressure gauge use a small sealed DC electromagnetic with high reliability，which is high sensitivity, impact resistance, vibration resistance. Features...

Thursday, June 17, 2021

Quantity : 500000tons - Price : $5-$200000

Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so on, as shown in diagram. The sliding sleeve could move upward or downward and rotate freely on the mandrel, there are several spiral hard alloy blades welded on the sliding sleeve, and...

Thursday, June 17, 2021

Quantity : 500000tons - Price : $5-$200000

The drill pipe is the steel pipe with thread at the end, for connecting the drill ground equipment and drilling equipment in drilling bottom or bottom hole device. The drill pipe is the device which used to transport drilling mud to drilling bit, and improve, bring down or rotary...

Thursday, June 17, 2021

Quantity : 500000tons - Price : $5-$200000

The tie-back assembly is a special cementing tool for tieback operation. Tieback equipment allows existing liners with a receptacle to be extended to the surface or farther up hole, and provides a high-pressure seal at the top of a cemented or uncemented liner. TIW offers variety...

Thursday, June 17, 2021

Quantity : 500000tons - Price : $5-$200000

Hydraulic Liner Hanger Polished Bore Receptacle Mated with tie-back assembly, it can tieback the liner to the top of well and act as efficiency sealing. The polished bore receptacle (PRB) is a highly machined component with a polished bore. Features of Hydraulic Liner Hanger Polished...

Wednesday, April 28, 2021

Hyperion Optics are specialist of providing custom prisms, meanwhile, we are also capable of precision prism bonding of custom design. From simple bi-prism bonding to multiple elements cementing, we provide detailed testing report regarding key specs such as angles, surface accuracy...

Wednesday, April 28, 2021

GX type casing scraper is with a spring and rotating design, which can removes rust, scale, cement, mud, bullets, paraffin, perforation burrs and other obstructions or foreign material from the inside walls of casing. The advantages is the big cleaning range and highly effective....

Wednesday, April 28, 2021

A slab gate valve is a sliding valve in which the closing members are parallel rams. The closing member may be a single shutter or a double shutter with a distracting mechanism therebetween. The pressing force of the shutter to the valve seat is controlled by the medium pressure...

Wednesday, April 28, 2021

FLOAT EQUIPMENT Floating equipment is generally used in the lower section of the well to help: Reduce strain on the derrick while guiding casing past ledges and slough zones in the hole; Provide a landing point for bottom and top cementing plugs (pumped ahead of and behind the slurry...)

Wednesday, April 28, 2021

Saigao Float Collar is supplied with plunger valve in most of the application. A non metallic Valve encased and held in place with a high pressure cement mixture. This design ensure the valve the maximum circulation rate in vertical, horizontal and deviational wells. Material used...

Saturday, January 16, 2021

Price : 1000-6000USD

As a professional air compressor supplier, we can select the air compressor model and brand corresponding to the volumetric flow and pressure according to the drilling hole diameter, drilling hole depth, etc. These high-quality air compressor for drilling rig are reliable in performance...

Thursday, January 07, 2021

Drill collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. Spiral drill collar is used to reduce contact area with hole so as to avoid efficient bit stricking...

Thursday, January 07, 2021

Downhole motor is to convert the high pressure fluid power of mud into mechanical energy for bit rotation. It is widely used in oil field and mine directional well and horizontal well, cluster Wells and vertical Wells, drilling, deflecting, adjusting azimuth, coring, reaming, side...

Thursday, January 07, 2021

Saigao double valve cement float shoe & collar offers dependable performance for all classes of oil and gas wells. The valve prevents cement back-flow, provided casing buoyancy during run-in, and acts as an internal BOP during the process of running and cementing the casing. The...

Thursday, January 07, 2021

Saigao Ditch Magnet are an oilfield tool designed to remove ferrous metal particles from drilling mud. The core part of the ditch magnet is the permanent magnets which decide the catching power of the products. The stronger the magnets, the more metal particles will be captured. As...

Thursday, January 07, 2021

The plug body of cylindric plug valve is in cylindrical shape, which makes up of a sealing pair with the tapered hole surface of valve body. Cylindric plug valve is generally sealed in four ways, namely, sealant, valve plug expansion, O-ring, eccentric plug wedges into valve seat...