MOULDINGS - 1016 ads

Friday, October 27, 2023

Price : 100USD

A dental impression is a mold removed from a tooth to diagnose and treat dental conditions. They are also used in forensic science. Impressions are also known as dental or dental casts. Usually, impressions are made in the dentist's office, although dentists may also travel to the...

Thursday, October 26, 2023

Quantity : 30-40sets/ - Price : USD3000-200000

Automotive Water Intake Manifold Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not require frequent changes to the mold and is versatile, but the disadvantage is that the nozzle needs to be modified and the single-use cost is high...

Thursday, October 26, 2023

Quantity : 30-40sets/ - Price : USD3000-200000

Auto Parts Mould Automotive Parts Mold features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimble marks, gate marks, sink marks, welding marks and flash or any other defects; 2...

Thursday, October 26, 2023

Quantity : 30-40sets/ - Price : USD3000-200000

Plastic Pipe Mold The gas-assisted controller is used to control the pressure of nitrogen to the mold at different times, the controller is divided into a single air circuit, double air circuit, and four air circuits, each gas path during Gas-assisted injection mold moulding can...

Thursday, October 26, 2023

Packson - Clean Room Injection Expert Packson specializes in delivering top-notch clean room manufacturing and assembly solutions tailored to meet the needs of medical device companies. Committed to adhering to the ISO 13485 standard, which is the gold standard for quality management...

Thursday, October 26, 2023

Multi-component molding is a highly efficient and cost-effective technology that enables the molding of custom plastic parts using two or three plastic resins or colors in a single operation, resulting in faster cycle times and flash-free products. As a leading expert in this technology...

Thursday, October 26, 2023

For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility. We are keen to meet your injection molding needs with single and convenient sources. Thanks to our advanced equipment...

Thursday, October 26, 2023

In addition to providing moulding die design solutions, we can also provide customers with product design optimization solutions to save more cost and time during mold processing. With the continuous development of the company, our engineering department has been constantly optimizing...

Wednesday, October 25, 2023

Flourish Legend provides a wide range of equipment components for the medical industry, including plastic parts, metal parts, and medical device enclosures. Our plastic machined parts are manufactured using high-quality plastic materials, ensuring excellent durability and precise dimensions...

Saturday, October 21, 2023

Hydraulic moulding press is the main equipment for compression molding. According to the frame structure, hydraulic plastic moulding machine is divided into frame structure and column structure. Specially designed for composite lightweight panels (such as various honeycomb sandwich panels)...

Saturday, October 21, 2023

Quantity : 5000 tons - Price : 30-300 USD

Its characteristics are that the forward cantilever structure is light and light, and its load capacity is strong. Utilization and work efficiency, the cantilever can be single sided rack or double sided rack. MBstorage is one of the leading structural cantilever rack manufacturers in China...

Saturday, October 21, 2023

The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and composite modified pre-dispersion. FAQs of Grade PF PEEK Powder Properties of Grade PF PEEK Pure Resin Fine Powder Polyetheretherketone...

Saturday, October 21, 2023

PEEK has good wear resistance, self-lubrication, non-toxicity, high-temperature resistance, low density, and can decrease noise, reduce energy consumption and prolong service life compared to metals.It can be formed by one-step Peek injection moulding with high production efficiency...

Tuesday, October 17, 2023

With the use of numerous techniques including shredding, washing, melting, and moulding, industrial plastic recycling machine can turn waste plastic into fresh, recyclable items. These devices are built to function at high capacity in an effective manner that is also ecologically friendly...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection and other aspects. Because PTFE molded rod has good high temperature resistance and corrosion resistance, it can improve the reliability...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presintered disperse resin by plunger. PTFE is commonly known as the king of plastics. It has many excellent features. PTFE molded parts have corrosive medium fluid piping...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

Self Adhesive PTFE Sheet PTFE surface itself is not adhesive, such as want to bond and other substances must need one side and two sides after Nana chemical treatment, and rubber, metal, and other substances bond, in special use, make up for the non-adhesive performance of polytetrafluoroethyle...

Monday, October 09, 2023

What Is the Difference between Insert Molding and Overmolding Plastic injection molding is one of the most widely used processes for manufacturing high-quality and extremely precise parts. The process is known for its multiple advantages. Consequently, a wide range of industries have...

Monday, October 09, 2023

Two shot moulding, also calleddouble shot injection molding, double shot moulding , multi shot injection molding or 2k injection moulding is one category of injection molding using two different thermoplastic materials to produce injection molded parts in two colors or two components...

Monday, October 09, 2023

Over molding of keyplast is a special plastic molding process. Overmolding custom injection molding is similar to the two-color molding or two-shot molding process. Over moulding can make the surface of the product full of softness and increase product functionality and added value...

Monday, October 09, 2023

Keyplast has efficient team with many years' experience of injection moulding, while medical industry is one of our mainly focused industries. With our deep insight into the medical injection moulding industry, MacroMedics approaches to Keyplast for injection moulding service in the...

Monday, October 09, 2023

Since 1980, Keyplast has involved in different industries and markets for 40 years. As a professional custom plastic parts manufacturer, we have experienced professionals and an efficient team to offer turnkey solutions for different clients and provide custom made plastic parts and...

Monday, October 09, 2023

Ⅰ. ABS Injection Molding Processing Performance (1) Because of the strong moisture absorption as well as high water content of ABS, the plastic parts that are made of ABS have low gloss and poor internal quality. As a result, ABS injection molding should be dried so that the water...

Monday, October 09, 2023

Quantity : 10 hq cont

Disposable Plastic Cutlery Set Eco-friendly reusable forks and spoons set is the earth-friendly alternative to single-use plastic cutlery. Lesui tough and sturdy paper disposable cutlery allows you to enjoy your salad or indulge in a piece of steak without any hassle. Perfect for wedding party...

Wednesday, September 27, 2023

Price : 1-10usd

Lightweight, adaptable, and strong extruded PVC custom foam profiles are employed in a variety of sectors. They are constructed from closed-cell, expanded PVC foam, which is strong, insulating, and weatherproof. For applications requiring efficient thermal insulation, sound insulation...

Wednesday, September 27, 2023

A mould trial is a process by which a new mould is optimised in order to produce the desired products as efficiently as possible. This makes it one of the most important aspects of injection moulding. DETAIL OF TRIAL MOLDING Trial Molding Process Set barrel temperature according to...

Wednesday, September 27, 2023

A thread is a continuous helical ridge formed on the inside (nut) or outside (screw) of a cylinder. This ridge is called the crest. Between each crest is a space, called the root. Threads are set at an angle to the axis of the bolt or nut. We provide quality threaded parts. DESCRIPTION...

Wednesday, September 27, 2023

We provide DIN(Deutsche Industrie Normen) standard mould parts of high quality toour customers. The mold standard parts are applied to all kinds of mold base and mold holders. As a professional precision mold supplier, we will provide good services to satisfy different requirements...

Wednesday, September 27, 2023

When it comes to custom injection molding, precise moulds and precision equipment are required for precision molding or PIM. Among the topics covered in this blog are general ideas, specific traits and qualities, as well as specific options for plastic materials, precision moulds...

Wednesday, September 27, 2023

Our plastic injection moulding process produces custom - rapid prototypes and end-use production parts in 15 days or less. We use aluminium moulds that offer cost-efficient tooling and accelerated manufacturing cycles, and stock more than 100 different thermoplastic resins. As a precision...