WELD - 1024 ads

Wednesday, May 21, 2014

The use of Q235C Carbon steel plate Mainly used for the production of various types of steel rivet, steel bolt, steel weld and other structural components. Chemical composition of Q235 C Carbon steel plate C(％), ≤0.18 Si(％), ≤0.30 Mn(％), 0.35～0.80 P(％), 0.040 S(％), 0.040 Cr(％), ≤0...

Friday, March 28, 2014

Quantity : 1 set - Price : $1000-40000

WL-FS-100K Stainless Steel Pipe Straight Seam Welding Machine WL-FS-100K Stainless Steel Pipe Straight Seam Welding Machine WL-FS-100K Stainless Steel Pipe Straight Seam Welding Machine DETAILED DESCRIPTION WL-FS-100K Stainless Steel Pipe Straight Seam Welding Machine price...

Wednesday, March 12, 2014

Key Specifications/Special Features: - We produce two type of shoulders for e clips, one is cast in shoulder, which is pressed in concrete sleepers, this type is made by casting from irons; another one is weld on shoulders, we produce by hot forging, this type is used in typical...

Thursday, February 27, 2014

Quantity : 100 - Price : negotiable

Hichine Victaulic coupling piping systems solutions can be found at work around the world from small to large commercial and industrial HVAC and fire protection system application, safety moving large volume of wet and dry mediums in industrial process piping, oilfield and mining operations...

Thursday, February 27, 2014

Quantity : 1000 sm2 - Price : $2.4/sm2

Hot dip galvanized welded wire mesh is made of high quality low carbon steel wire through automatic digital controlled welding equipments. It is welded with plain steel wire, then hot dipped galvanizing after welding. The finished products are level and flat with sturdy structure...

Saturday, November 23, 2013

Quantity : 10000 - Price : USD20

China HI-Lo welding gauge for pipe inspection MEASURES INTERNAL ALIGNMENT Of pipe after fit-up/ alignment, cuts radiographic rejects. Measures internal misalignment of pipe before and after tacking. Measurements read in standard one side, and metric on the opposite side. Changes...

Thursday, November 21, 2013

Quantity : 1 set - Price : 44000usd

We provide the Used Affordable construction machines as an alternatives to new machines , such as used excavator, grader, bulldozer, road roller, forklift, crane, loader and so on Made in japan year 2007 work 4800 hour well maintained very good working condition ready to work...

Tuesday, September 24, 2013

Quantity : 1000 - Price : 1 000,00 €

Submerged arc welding pipe, SAW , SAW pipe manufacturer, SAW Exporters, Welded pipe Submerged arc welding (SAW) is a common arc welding process. SAW is normally operated in the automatic or mechanized mode, however, semi-automatic (hand-held) SAW guns with pressurized or gravity...

Tuesday, September 24, 2013

Quantity : 1000 - Price : 1 000,00 €

High frequency welding, HFI pipe, ERW pipe, ERW Steel , Electric Resistance Welded , ERW Steel Tubes Suppliers, ERW Steel Tubes Exporters In High Frequency Welded (HFW) pipe production process, hot rolled steel coils are fed with a high capacity accumulator in order to achieve continuous...

Tuesday, September 24, 2013

Quantity : 1000 - Price : 1 000,00 €

Stub Ends are fittings used in place of welded flanges where rotating back up flanges are desired. They are also called Lap Joints and Vanstone Flared Laps. A rotating back up flange seats itself against the back surface of the Stub End. When bolts are added, the clamping action...

Monday, September 23, 2013

Quantity : 1000 - Price : 1 000,00 €

End Cap, Carbon Steel cap, Stainless Steel Caps, Pipe caps End Cap, Carbon Steel cap, Stainless Steel Caps, ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches. carbon steel butt welded seamless Caps is usually used for protecting the end of pipe and other fittings,so the...

Monday, September 23, 2013

Quantity : 1000 - Price : 1 000,00 €

We bring forth an exclusive range of U-bend tubes, which are known for their superior quality and excellent functionality. Each U bend tube of our range is rigorously quality checked by our team of talented professionals on every stage of production to deliver the clients defect...

Monday, September 23, 2013

Quantity : 1000 - Price : 1 000,00 €

Heat exchange tubes are intended for heating or cooling process fluids, they are for example suitable for closed circuit cooling of electrical equipment using demineralised water and for cooling water soluble oil solutions in quenching tanks. Tubes for Heat Exchanger and Condensers...

Monday, September 23, 2013

Quantity : 1000 - Price : 1 000,00 €

Heat exchange tubes are intended for heating or cooling process fluids, they are for example suitable for closed circuit cooling of electrical equipment using demineralised water and for cooling water soluble oil solutions in quenching tanks. Tubes for Heat Exchanger and Condensers...

Friday, May 24, 2013

Quantity : 5000 - Price : USD 1.5-3/Kg

Bimetallic Wear Resistant Pipe Elbows Details Product name long radius elbow, short radius elbow, 45/90/180 degree elbow high pressure elbow, equal/reducing elbow, steel elbow Size DN15 to DN600and according to the customer requirement Wall thickness 3-50MM Pressure...

Thursday, February 21, 2013

Quantity : 1 - Price : 10 000,00 €

Tunnel Thruster : Tunnel Thrusters are Fixed Pitch Propeller or controllable pitch propeller thrusters. The features as follows: -Superior Strength Tough and rational structural design has accomplished superior strength ,Especially strong and durable driving shaft and seal are...

Monday, October 29, 2012

Quantity : your reque - Price : 0,00 €

Elbow My skype: china36999 my mai: rain(at)zhengdacast.com Elbow can be divided into many kinds: Stamping elbow, the suppression of elbow, butt weld elbow, stainless steel elbow, carbon steel elbow, wear-resisting elbow, bend, three links. Material: stainless steel 304(L) or 316(L)...

Monday, October 29, 2012

Quantity : your reque - Price : 0,00 €

Flange Flanges are divided into two kinds: threaded connections (silk pick) flange and welding flanges. such as with the neck flat welding flanges, with neck butt weld flanged, threaded flange, slide flange, lap flange, socket weld flange, the pine set of flange, ping welded loop...

Saturday, October 20, 2012

Quantity : negociatio - Price : negociation

HDPE Pipe Introduction 　　　 High density polyethylene(HDPE) pipe takes special polyethylene as the raw material and be extruded by once-shaping technology from a plastic extruder. The pipe can be applied to urban water supply pipe networks, irrigation and water diversion projects...

Friday, August 31, 2012

Quantity : 2000000 - Price : 500,00 €

Electric Resistance Welded Steel Pipe - Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Oil drilling and machinery manufacturing, etc. - ERW : Electric Resistance Welded pipe - HFI: High Frequency Induction weld pipe - EFW: Electric Fusion Welded...

Sunday, July 22, 2012

Quantity : 100 - Price : 700,00 €

- ERW Steel Pipe - Electric Resistance Welded Steel Pipe - Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Oil drilling and machinery manufacturing, etc. - ERW : Electric Resistance Welded pipe - HFI: High Frequency Induction weld pipe - EFW...

Monday, July 09, 2012

Quantity : 5000tons - Price : flexible

Electric Resistance Welded Steel Pipe Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Oil drilling and machinery manufacturing, etc. ERW : Electric Resistance Welded pipe HFI: High Frequency Induction weld pipe EFW: Electric Fusion Welded Pipe Standard...

Sunday, July 01, 2012

Quantity : 5000tons - Price : flexible

Electric Resistance Welded Steel Pipe Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Oil drilling and machinery manufacturing, etc. ERW : Electric Resistance Welded pipe HFI: High Frequency Induction weld pipe EFW: Electric Fusion Welded Pipe Standard...

Thursday, June 21, 2012

Quantity : 2 PLESE - Price : USD1-100

sell carbon steel neck flange steel pipe fittings carbon steel weld neck flange 1)Welding Neck flange 2)Material: carbon steel 3)Standard: ASME, ANSI carbon steel weld neck flange ANSI B16.5 Class1503006009001500WNSOBLTHLJSW JIS 5K10K16K20KPLSOBL DIN257325722631257626322633254326342545P LSOWNBLTH...

Thursday, June 21, 2012

Quantity : 2 PLESE - Price : USD1-100

steel pipe fittings carbon steel weld neck flange steel pipe fittings forged carbon steel weld neck flange 1)Welding Neck flange 2)Material: carbon steel 3)Standard: ASME, ANSI forged carbon steel weld neck flange ANSI B16.5 Class1503006009001500WNSOBLTHLJSW JIS 5K10K16K20KPLSOBL...

Friday, August 12, 2011

Quantity : 9999 - Price : 1,00 €

Triple Offset Butterfly Valve 1) Design and manufacture standards: A) Wafer and lug: API 609, DIN3354 B) Flange and weld: BS5155 / EN598 2) Inspection and test standards: API 598, DIN3230, BS5146 3) Face-to-Face: A) Wafer and lug: API609, DIN3202 K2 B) Flange: ISO 5752 4) End flange dimension...

Friday, August 12, 2011

Quantity : 9999 - Price : 1,00 €

Rubber Lined Butterfly Valve  Product features    DN50-DN4500, PN6/10/16/25,  To DIN3352 or API609  Face to face per DIN3202/ISO5752  Flange ends dimension DIN2501/ANSI B 16.5/ANSI B 16.47  Final inspection tests to API598/DIN3230.    Materials...

Thursday, August 11, 2011

Quantity : 9999 - Price : 1,00 €

Cast Steel Ball Valve 1. Size of 1/4 inch to 48 inch. 2. Pressure from class 150 to class 2500. 3. End connections by RF/RTJ/butt-weld, socked and full welded, threaded, top and side entry. 4. Designed and tested to API 598/6D, 2-piece bolted body design. 5. Fire safe to API-607 and anti-static...

Thursday, August 11, 2011

Quantity : 9999 - Price : 1,00 €

Forged steel cryogenic gate valve 1. Size: 1/2"~2" 2. Pressure: 150Lb~1500Lb 3. Material: A105, Stainless Steel 304 Or F316 4. Design And Manufacture: API 602 5. Inspection And Test: API 598 6. Socket-Weld Dimensions: ASME B16.11 7. End Threads Dimensions: ASME B1.20.1 8. Pressure-Temperature...

Thursday, August 11, 2011

Quantity : 9999 - Price : 1,00 €

Forged steel flange gate valve   1. Size: 1/2"-2" 2. Pound Class: 150Lb-1500Lb 3. Design and Manufacture: API602, BS5352 4. Socket-Weld Dimension: ANSI B16.11 5. End Connection Std.: ANSI B1.20.1 6. Pressure & Temperature Ratings: ASME B16.34 7. Test Standard: API 598 8. Material: A105...