GLASS FIBER - 13942 ads

Saturday, January 21, 2023

Quantity : 300sets/mo - Price : 7800-200000USD

Features of Cassava Centrifugal Sieve The slurry is pumped directly to the center of the conical rotating screen basket. Under centrifugal force, the starch is flushed through the screen onto the back of the basket and leaves the centrifugal sieve while fiber/pulp sliding off the...

Saturday, January 21, 2023

Dynamic Image Analysis Particle Size for Dry Measurement The BeVision D2 provides an efficient solution to the size and shape analysis of dry, high-flowability powders or granules. Tens of thousands of particles can be measured by a BeVision D2 within three minutes. Combining a high-speed...

Saturday, January 21, 2023

The Bettersizer ST is an automated laser scattering particle size distribution analyzer designed for industrial quality control. Its patented DLOS (Dual Lens Optical System) guarantees the instrument to provide consistent and reliable particle size distribution results. The SOP...

Saturday, January 21, 2023

Dynamic Imaging Particle Analysis Most particle size measurement techniques methods are based on the assumption of spherical shaped particles. This hypothesis leads to significant errors in the analysis if the particles are flake or rod-shaped. Especially for such highly form-anisotropic...

Saturday, January 21, 2023

Price : $30000~300000/set

Overview of SK53 Twin Screw Extruder SK53 small twin screw extruder is a mini extruder machine that can be used in engineering plastics, color masterbatch, functional masterbatch, blending modification, and other industries. In order to adapt to the high temperature and high wear...

Saturday, January 21, 2023

What Is Stabiliser 466? Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, that can easily be soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products. The main raw...

Saturday, January 21, 2023

Sodium carboxymethyl cellulose gum (Na-CMC or cellulose gum) is the most widely used and most frequently used type of anionic cellulose ether. It is a white fibrous or granulated powder. Odorless, tasteless, non-toxic, hygroscopic, easily soluble in both hot and cold water, obtained...

Saturday, January 21, 2023

Quantity : 55 - Price : 39,00 €

how to activate hair regrowth strong and healthy hair the crece pelo range is developed with technology that accelerates hair growth and promotes full treatment of your strands, leaving them healthy, shiny, soft and supple. Ideal for those with oily roots, since its shampoo promotes...

Friday, January 20, 2023

This fiber is made of cold-drawn wire. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for glued steel fibers. Compared with traditional concrete, this kind of steel fiber has a great improvement in crack resistance and antiknock performance...

Friday, January 20, 2023

This fiber is a high-performance hooked steel fiber. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for glued steel fibers. It can be widely used on roads, highways, curbs, factory floors, airport runways and etc. If you are interested...

Friday, January 20, 2023

This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It also has good dispersion in concrete. which is widely used in industrial floors, high-way speed...

Friday, January 20, 2023

The glued steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It is widely used in industrial floors, mortar reinforcement, shotcrete, tunnel and etc....

Friday, January 20, 2023

The glued steel fiber are water-soluble with good dispersion in concrete. It is widely used in construction, highway pavement, bridge, tunnel, airport pavement and other fields with its excellent tensile, bending, shear, crack resistance, impact resistance, fatigue resistance, and high toughness...

Friday, January 20, 2023

Micro steel fibers are made of copper coated steel wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high strength, high tenacity, very good durability, and volume stability. It is a good and a new kind of construction materials. Micro steel...

Friday, January 20, 2023

Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure that it has high tensile strength and animal tolerance. And the steel fiber in bulk ensures the mixing fast and convenient, and the distribution homogeneous. During pulling from the cement...

Friday, January 20, 2023

There are many types of steel fibres used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural...

Friday, January 20, 2023

01- FBT Coupler Splitter FBT dwdm splitter is an optical splitter that uses the Fused Biconical Taper (FBT) technique for splitting optical power and/or splitting wavelengths. The fused fiber coupler is created through a process of fusing two bare fibers pulling the fused section...

Friday, January 20, 2023

Compensation of dispersion at a wavelength around 1550nm in a 1310nm optimized single-mode fiber can be achieved by specially designed fibers whose dispersion coefficient (D) is negative and large at 1550nm. These types of fibers are known as Dispersion Compensating Fibers (DCF fiber)...

Friday, January 20, 2023

Hot-swappable plug-in OLP card only occupies 1 slot in the 1U/2U/5U chassis, which can be highly integrated with SINTAI management platforms and OEO/DCM/EDFA products. SINTAI Multi-Service Transport (FMT) System is engineered to support low-cost olp DWDM solutions for high-capacity...

Friday, January 20, 2023

Optical Repeater Definition OEO(Optical-Electrical-Optical) fiber optic repeater single mode is a device used in optical transmission which converts signals by amplifying and shaping, even the conversion of wavelength and the pattern. With the OEO multimode fiber optic repeater, we...

Thursday, January 19, 2023

As one of the professional gas pressure gauge manufacturers, Lanso is committed to offering SF6 gas density monitors/gauges, which include density relay, density meter, density switch, density transmitter, valves, and instruments. SF6 gas pressure gauge is suitable for different kinds...

Thursday, January 19, 2023

Polarization Beam Splitter/Combiner, or PBS polarization beam splitter, is a fiber assembly built on polarization-maintaining or regular fiber. It is normally used for coupling two beams of ortho-polarized light into one fiber or coupling a single output containing ortho-linearly...

Thursday, January 19, 2023

Multicore Fiber Fanout, or the so-called MCF Fiber, is a special optical fiber with multiple cores in one cladding. At present, the application of multi-core optical fiber is gradually becoming more and more widespread. It is normally used to connect with the traditional single-core fiber system...

Thursday, January 19, 2023

Designed and produced by MEI SU, this mini PM fiber coupler can split the input power stably in the splitting ratio of 5: 95. And similar to the other PM coupler produced by MEISU, Mini PM Coupler (5: 95) can also maintain the beam polarization during the use. Moreover, designed with...

Thursday, January 19, 2023

This kind of micro mechanical optic switch is driven by a relay to control the prism to turn, thus switch the path, with only few channels such as １ｘ１,１ｘ2, and２ｘ２. It is normally used for OLP (Optical Fiber Line Protection) system. This mini switch can be seen as an updated version...

Thursday, January 19, 2023

Regular 10um fibers can hardly been coupled efficiently when they are used to align with silicon waveguild. Therefore, fibers with small mode field diameter (MFD) come into use. It can be fusion spliced to SMF28 fiber, working as a connecting bridge between regular 10um fiber and silicon chip...

Thursday, January 19, 2023

MEISU'S MEMS optical reed switch includes a MEMS chip and a micro mirror that is driven rotating to realize optical path swithing. Well designed by the professional engineers, MEISU's capacitive MEMS switches are all featured with compact size, high channel count and long life time...

Thursday, January 19, 2023

Our Bibo Diffuser features a Semicircle shaped, bamboo fiber top comes with several covers in different colors. This model suits a more minimalist taste and has been designed to be paired back with a natural aesthetic. Features of Bibo-Bamboo Fiber Base Portable Globe Cute Colorful...

Thursday, January 19, 2023

Inspired by the beauty of nature, the MOZZIN aroma diffuser uses natural materials to reduce its environmental impact. As one of the popular bamboo collection of diffusers, the real bamboo and glass aromatherapy diffusers feature a modern, hand-cut design, as well as low energy consumption...

Thursday, January 19, 2023

Basic Data of Fiber Optic LC to PC Patch Cord Multimode OM4 Product No.: CL-PLCLC-OM4 Delivery Time: 15-20 days MOQ（Neutral): 100 Pieces Package: Neutral or OEM Packing bag Payment Term: Western Union, Paypal, T/T Copperled is a structured cabling supplier and manufacturer, and also...