INTERNALS - 4215 ads

Thursday, March 10, 2016

Introduction: Automatic lighting surge generator (or Lighting surge immunity) SG61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by...

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Tuesday, March 08, 2016

IG3112E 0.15-6KW 150 watt pure sine wave inverter Key Features: 1. Pure Sine wave Output. 2.Low work noise, high efficiency. 3.Small, light and artistic, benefited from adopting the SMD pastern technology. 4.Featured with high reliability and low failure rate by using the advanced...

Saturday, March 05, 2016

Quantity : 6000 - Price : $2.95

The MSP430F23x, MSP430F24x(1), and MSP430F2410 series are microcontroller configurations with two built-in 16-bit timers, a fast 12-bit A/D converter (not MSP430F24x1), a comparator, four (two in MSP430F23x) universal serial communication interface (USCI) modules, and up to 48 I/O pins...

Saturday, March 05, 2016

Quantity : 6000 - Price : $1.5

The MSP430F22x4/MSP430F22x2 series is an ultra-low-power mixed signal microcontroller with two built-in 16-bit timers, a universal serial communication interface, 10-bit A/D converter with integrated reference and data transfer controller (DTC), two general-purpose operational amplifiers...

Saturday, March 05, 2016

Quantity : 6200 - Price : 1,10 €

The MSP430F21x2 series is an ultra-low-power microcontroller with two built-in 16-bit timers, a fast 10-bit A/D converter with integrated reference and a data transfer controller (DTC), a comparator, built-in communication capability using the universal serial communication interface...

Saturday, March 05, 2016

Quantity : 20000 - Price : $0.4

The MSP430G2x01 and MSP430G2x11 series is an ultralow-power mixed signal microcontroller with a built-in 16-bit timer and ten I/O pins. The MSP430G2x11 family members have a versatile analog comparator. Typical applications include low-cost sensor systems that capture analog signals...

Saturday, March 05, 2016

Quantity : 10-100 - Price : 0.01-1

Keywords of CNC Machining Parts: Machining Parts, CNC machining, CNC machining parts, Precision CNC machining parts, precision machin ing parts, CNC Machining components, Machining components Machining Processes of CNC Machining Parts: Milling, Turning, Drilling, Boring, Tapping, Turning...

Saturday, March 05, 2016

Quantity : 10-100 - Price : 0.01-1

Keywords of Turning Parts : Turning parts, precision turning parts, CNC turning parts, CNC turned parts, precision CNC turned pa rts, precision turned parts, turned parts Product Description of Turning Parts: Machining Processes of Turning Parts: Milling, Turning, Drilling, Boring...

Friday, March 04, 2016

Quantity : 50 tons

Product applications CC10 is a highgrade modified plastic material, which is applicable to HDPE and LLDPE blown film, PP Injection molding, PP sheet materials, PP wire drawing and HDPE pipe, and so on. CC10is particularly applicable to the film materials, and it can reinforce the films rally...

Friday, March 04, 2016

Quantity : 50 tons

roduct applications CC10 is a highgrade modified plastic material, which is applicable to HDPE and LLDPE blown film, PP Injection molding, PP sheet materials, PP wire drawing and HDPE pipe, and so on. CC10is particularly applicable to the film materials, and it can reinforce the films rally...

Thursday, March 03, 2016

Quantity : 50 Tons

Product applications CC10 is a highgrade modified plastic material, which is applicable to HDPE and LLDPE blown film, PP Injection molding, PP sheet materials, PP wire drawing and HDPE pipe, and so on. CC10is particularly applicable to the film materials, and it can reinforce the films rally...

Tuesday, March 01, 2016

Quantity : 1 - Price : 1,00 €

Super Board is 100% free from asbestos or sepiolite or any inorganic fibres. It is resistant to abrasion, scratch, thermal, impact and fire attack. Super Board is Super Boardble and weather resistant and will not promote fungi or mould growth. In short, the panel is designed for...

Tuesday, March 01, 2016

Quantity : 1 - Price : 1,00 €

Super Board is 100% free from asbestos or sepiolite or any inorganic fibres. It is resistant to abrasion, scratch, thermal, impact and fire attack. Super Board is Super Boardble and weather resistant and will not promote fungi or mould growth. In short, the panel is designed for...

Tuesday, March 01, 2016

Quantity : 1 piece

Product Description The Stroboscope include AT-135A and AT-135B two model. Use photoelectric signal while external trig gering, achieve automatic tracking function of the pattern, Use microcomputer technology, emerging t echnologies, anti-jamming technique and other advanced technology...

Sunday, February 28, 2016

Before the curing Appearance A: Trasparent B: Blue Relative Density 0.96～1.00(g/cm3) Viscosity At 25℃ A: 650~850 B: 650~850 (mPa·s) After the curing Degree 240~280 Fire resistance Flameout Time ＜16s curing time ＜2h Complete time ＞4h 1.Features ZS-GN01A/B is a kind...

Wednesday, February 24, 2016

Before the curing Appearance White paste Relative density 1.60～1.70(g/cm3) Surface drying time ≤15(min) After the curing Tensile strength ≥1.5（MPa） Elongation At Break ≥150(%) Shear strength ≥2.0(MPa) Hardness 35～45(Shore A) Temperature Range -60～200(℃) Volume resistivity 2...

Wednesday, February 24, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Monday, February 15, 2016

Quantity : 5

Model: A2000RGB 2W RGB A3000RGB 3W RGB A5000RGB 5W RGB Feature: 2 W,3 W,5 W RGB animation laser light Laser power: 2 W,3 W,5 W RGB laser. Brightness adjustable Control mode: Auto/Sound/DMX/Master-slave/PC/SD card Geometry patterns: 128 Cartoon patterns Internal Program Automatic show times...

Monday, February 15, 2016

Quantity : 5

Model: A2000G 2 W green laser A3000G 3 W green laser,A5000G 5 W green laser,A7000G 7 W green laser Laser power: 2 W,3 W,5 W,7 W Brightness adjustable Control mode: Auto/Sound/DMX/Master-slave/PC/SD card Geometry patterns: 128 Cartoon patterns: 128 Music show times : 30 minutes　Automatic...

Friday, January 29, 2016

Product Overviews WOPSON specialize in security & monitoring system This product is suitable to inspect the pipeline, sewer, air duct, tank, underwater and others dark environment, check the internal cracks, corrosion, weld, plugs and other unusual circumstance. It has been...

Friday, January 29, 2016

Product Overviews WOPSON specialize in security & monitoring system This product is suitable to inspect the pipeline, sewer, air duct, tank, underwater and others dark environment, check the internal cracks, corrosion, weld, plugs and other unusual circumstance. It has been...

Tuesday, January 26, 2016

Description: CMF Coriolis mass flowmeters are the leading precision flow and density measurement solution offering the most accurate and repeatable mass measurement for liquids, or slurries. CMF meters offer the most accurate measurement available for virtually any process fluid...

Tuesday, January 19, 2016

Quantity : 2700 - Price : $0.23

The STM8S003F3/K3 value line 8-bit microcontrollers offer 8 Kbytes of Flash program memory, plus integrated true data EEPROM. They are referred to as low-density devices in the STM8S microcontroller family reference manual (RM0016). TheSTM8S003F3/K3 value line devices provide the...

Friday, January 01, 2016

Quantity : ask - Price : ask

New PDT 7 color photon led light!!led therapy with led light system HK8 led machine Work Theory Photodynamic is cold light which does not create high heat and burn the skin. Through transferring light energy into cell internal energy, soft photon equipment accelerates circulation...

Monday, December 28, 2015

DongguanKaiao Electronics Technology Co.,Ltd. is a manufacturer located in Dalang Town,Dongguan city,Guangdong province. It was established in 2 0 0 8. What do we doWe have a professional team specialized in design,development, production and sales first-class silicone products...

Tuesday, December 22, 2015

Application and Description These cables are designed for the internal wiring of switchboards and distributor boards with an alternating nominal voltage up to 1000 Volts or a direct voltage up to 750 volts. Generally install in or ducts and internal wiring of appliances with maximum...

Thursday, December 17, 2015

Quantity : ask - Price : ask

HK8 LED Light Acne PDT Exposed Skin Care Device(Manufacturer) Work Theory: Photodynamic is cold light which does not create high heat and burn the skin. Through transferring light energy into cell internal energy, soft photon equipment accelerates circulation of cells' growth...