PROPERTIES - 6485 ads

Monday, April 25, 2022

SINOFLOC nonionic flocculant are technically pure polyacrylamides. Nonionic polyacrylamide exhibits neutral nonionic properties in the aqueous solution which is hardly influenced by the PH value in the application. SINOFLOC nonionic polyacrylamide flocculant are suitable for use as...

Friday, April 22, 2022

Quantity : 300m-350m/ - Price : 100USD

The extruder open screw barrels are used in the feeding section, the natural exhausting section and the vacuum exhausting sections. Depending on the materials produced, the placement of the open barrel is different. The opening shapes of extrusion screw barrel can be square, rectangular...

Friday, April 22, 2022

Quantity : 300m-350m/ - Price : 100USD

Extruder barrels plays an importante role inside extruder. Barrel and screw elements are corporated each other to support extruder process smoothly. There is both a feed barrel for the main feed and a extruder barrel for top-head degassing. Technical Data of Extruder Feed Barrels Brand：LESUN...

Friday, April 22, 2022

Quantity : 300m-350m/ - Price : 100USD

Twin Screw barrel Diameter: φ20 mm ~φ300 mm Twin Screw barrel Properties: Wear-resisting, Corrode-resisting, Durable Nanjing Lesun Screw Co.,Ltd specialize in the manufacture of parallel co-rotating modular Barrel, involving various types of twin screw barrel ranging from Ø20mm to Ø300mm...

Friday, April 22, 2022

Quantity : 300m-350m/ - Price : 100USD

Extrusion barrel plays an importante role inside extruder. Barrel and screw elements are corporated each other to support extruder process smoothly. Extruder side open barrels have opening both at the top and side . The upper opening is for venting purposes. Technical Data of Extruder...

Friday, April 22, 2022

Owningmany quality system certifications and patents, we can offer complete variety for texture roller coverings, and our rubber-coated roller tape product is diversified. By applying different materials and patterns on the surface, different surface characteristics can be realized...

Thursday, April 21, 2022

Quantity : 8000kgs - Price : USD0.025 - USD1.05

E-Grind supplies the whole range of pcd cutting tool blanks for pcbn cutting tools purpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface. Application of pcd metal Our plant installs laser cutting machines and...

Thursday, April 21, 2022

Quantity : 3 million

The most common plastic card size is CR80 defined as 3.370 inches (85.6mm) wide and 2.125 inches (54mm) high. Based on it STAR TREND also offers the combo cards to accomplish one loyalty card made up of a master card plus sub cards. Customized Plastic Card Sizes for Sale Most plastic...

Thursday, April 21, 2022

Price : 100USD

Thermal security camera system is widely used in areas where security and monitoring are required for timely detection of abnomal situations in order to prevent further damage. Below are two typical type of cameras for thermal surveillance and the importance of thermal imager for...

Thursday, April 21, 2022

WHAT IS NANOSOX? Made of special hi-tech inherent permanent fire resistant fabric materials, Nanosox fabric air dispersion system is a terminal air dispersion system that transfers and distributes air in the space. The Nanosox perforated air duct system can replace traditional ductwork...

Thursday, April 21, 2022

Quantity : 1 million - Price : USD400-USD2000

OVERVIEW OF ALLOY STRUCTURAL STEEL Structural alloy steel are the type of steels formed by adding different proportions of alloying elements like manganese, chromium, nickel, molybdenum, vanadium, the addition of which is to enhance the mechanical and physical properties within the...

Thursday, April 21, 2022

Quantity : 1 million - Price : USD400-USD2000

High quality alloy steel products are the type of steels fabricated by alloying with additional elements such as nickel, manganese, molybdenum, chromium, vanadium, silicon and boron, the addition of which enhanced the mechanical and physical properties within the ordinary carbon steel...

Wednesday, April 20, 2022

What Is Allulose Syrup? Just as allulose powder, allulose syrup is another type of physical form of the low-calorie sweetener, which is a light yellow liquid. This healthy sweetener can not only help to displace the high calories and decrease sugars, but also be used as a one-to-one...

Wednesday, April 20, 2022

Saigao Nutri provides many healthy natural sweeteners such as dietary fiber, oligosaccharides sweetener, sugar series, and allulose. SAIGAO low calorie sugar substitute include: Resistant Dextrin, Fructo oligosaccharide, Malt oligosaccharide, Xylo-oligosaccharide, Galacto-oligosaccharide...

Wednesday, April 20, 2022

Quantity : 3500 tons/ - Price : $1.72~3

What Is Sorbitan Laurate? Sorbitan monolaurate, also known as sorbitan laurate/SML, is synthesized by the esterification of sorbitan with lauric acid. It has a molecular formula of C18H34O6. At room temperature, sorbitan monolaurate is a yellow to amber viscous liquid or soft paste...

Wednesday, April 20, 2022

Quantity : more than - Price : 3000-6500 euro per M

Description of Cold Rolled Steel Strip Strip steel has more stringent thickness tolerances than cold-rolled steel. Before rolling, cold rolled strip is pickled to remove surface impurities and ensure a clean, even finish. The strip does not shrink or creep at ambient temperature....

Wednesday, April 20, 2022

Quantity : more than - Price : 3000-6500 euro per M

Aluminum Ingot Product Details and Application Aluminum is a silver-white metal and ranks third in the earth's crust after oxygen and silicon. The density of aluminum is relatively small, only 34.61% of iron and 30.33% of copper, so it is also called light metal. Aluminum is a non-ferrous...

Wednesday, April 20, 2022

Quantity : 500tons - Price : USD0.015-----USD100

SmCo Magnets for Sale Category: rare earth magnets/ Samarium-Cobalt magnets/ SmCo magnets Advantages: highest coercive force; highest working temperature; good temperature stability Disadvantages: price is too expensive The same as neodymium magnets, Samarium Cobalt magnets are also...

Wednesday, April 20, 2022

Quantity : 500tons - Price : USD0.015-----USD100

Brief introduction of isotropic rubber magnet(magnetic rubber): Rubber magnets sometimes called magnetic rubber. Magnetic rubber itself has no magnetism , the magnetism comes from filled magnetic powder. So the magnetic powder is obligate material for produce magnetic rubber. Magnetic...

Tuesday, April 19, 2022

5 Axis Machining Parts Forlong focuses on producing 5 axis cnc parts of cnc machined bike frame. Fl-machining.com is a professional cnc turning company in China offering cost-effective Stainless steel products with CNC milling services and turning services. CNC Milling and Turning...

Tuesday, April 19, 2022

Abs plastic part is a kind of "tough, hard, and rigid" material with easily available raw materials, good comprehensive performance, low price, and a wide range of uses. ABS plastic has been widely used in machinery, electrical, textile, automobile, aircraft, ship, and other manufacturing...

Tuesday, April 19, 2022

Modern hanging cabinet design is popular in simple and stylish atmosphere. His success lies in the overall effect and detailed control. Hiding intelligence andmulti-function under its low-key appearance can surprise people inadvertently. He is neither heavy nor frivolous. He focuses...

Tuesday, April 19, 2022

Silicone rubber injection molding has more than a half-century history since the late 1970s. There are two molding ways of silicone rubber injection molding process: Liquid Silicone Rubber Injection Molding (LSR) and Solid Silicone Rubber Molding. There are thousands of applications...

Tuesday, April 19, 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Tuesday, April 19, 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Tuesday, April 19, 2022

2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mold...

Saturday, April 16, 2022

7CF® multi use bubble cleaner spray is an active foam cleaner that quickly and gently removes dirt from cars, yachts, motorcycles and upholstery. Multi purpose foam cleaner does not leave any dirt rings. The upholstery colors will look new. Formulate with biological surfactants...

Saturday, April 16, 2022

7CF® high heat appliance spray paint (300℃) is an organosilicone resin base high heat aerosol paint, which is made of special organosilicone resin, heat resistant pigments, and additives combined with advanced production technology. Heat spray high temperature paint has the characteristics...

Saturday, April 16, 2022

7CF® back car wax can quickly, effectively and safely remove surface contaminants, light stains, oxidation, fine scratches and blemishes that dull your finish to leave a high gloss shine on the vehicle paint or other finishes. Color back car polish's micro-abrasives will not damage...

Saturday, April 16, 2022

7CF® Chain Lube Spray is an aerosol product that can form a Teflon high-strength adhesion lubricating coating after use, contains PTFE, synthetic high heat resistant lubricant. Providing strong lubrication, high anti-friction, excellent rust and corrosion for chains, open gears and...