30A 12/24V wind/solar hybrid controller
Quantity : 1PCS Price : USD$65.00
Brand:
|
WELLSEE
|
Dimension:
|
123*120*41 cm
|
Name:
|
Wind/Solar Hybrid Light Controller
|
Weight:
|
600g
|
Model:
|
WS-WSC30 30A
|
Package:
|
40pcs/carton
|
Wellsee Wind/Solar Hybrid light controller (Wellsee Wind/Solar Hybrid intelligent
controller) WS-WSC series are new product designed and self-developed with advanced control circuit by Wuhan wellsee new energy industry co.,
ltd. The new generation wellsee wind/solar hybrid intelligent light controller is
different from other controllers, which is specially designed for wind/solar
hybrid street light in the integration of wind power and solar power. This
controller can reduce the single engery may cause the insufficient supply of
electricity or unbalanced conditions by useing wind energy and solar energy
resources to make power. It has light control+time control exact timing control
function which can extactly control loads turn on/off time (Optional). Wellsee
hybrid light controller not only effiiently convert the electricity made by wind
turbine and solar panel and charge batteries, but also supply strong control
functions.
Functions:
1.Turn on light at dusk and turn off light at dawn automatically according to
light intensity.
2.Inside temperature compensation function.
3.Using a high quality aluminmum alloy shell,small size and good for heat
4.Microprocessor intelligent control, exactly control.
5.Anti-surge protection,short-circuit protection and reversed polarity protection.
6.Overload protection,Overcharge protection,Overdischarge protection.
7.Adapting two wasy of DC putputs,light control, time control, continuous output,
and various output control ways to choose
8.Adapting the pwm mode to unistall, release the extra electricity to unloader
so that the battery is in the best state of charge all the way.
9.Adapting the way of limiting voltage and current to make sure the battery is in
the best state of charge all the way.
10.Recognize the wind turbine charging voltage and charging current exactly with
safe and complete multiple wind turbine brake protection system.
11.Way of Round protections to ensure the systame stability (including solar panel
reversed polarity protection,battery overcharging,battery overdischarging,battery
reversed polarity protection,loads overload,thunder protection, wind turbine
current limited, wind turbine brake automatically and brake by human )
MODEL |
WS- WSC30 30A |
System voltage |
12V/24V Automatic voltage recognition |
Max charge current |
30A |
Max discharge current |
30A |
Rated power for wind turbine |
400W ~ 800W(12V/24V) |
Charge off voltage HVD |
14.4V / 28.8V |
Low Voltage Directive LVD |
10.8V / 21.6V |
Low Voltage Restore LVR |
11.8V / 23.6V |
Charge loop drop |
<300mV |
Discharge loop drop |
<50mV |
Overload protection |
31.5V |
Short-circuit protection |
30A |
Light operate |
light control on + light control off |
Light time control |
Light control on/off + time control on/off |
Time control classification |
0.5 hours started, half an hour of one grade, |
Output route |
single bulb |
Ambient temperature |
-25℃——+55℃ |
Safe degree |
IP55 |
Quiescent dissipation |
24mA |
Wind turbine braking mechanism |
Unloading brake |
Control mode |
Solar charge/wind charge are both for PWM |
Contact : shirley li, 86 27 86836688
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of 30A 12/24V wind/solar hybrid controller Search in a category : Stock lots Search in a category : solar, wind, controller, hybrid |
Thursday, October 12, 2023
ZHANGXIAOQUAN: Japanese knife suppliers, prepare the finest cuts of sushi or fillet 8.5-inch sharp Knife. This Japanese Knives has the same length, weight and shaped of blade design of different material handle for your selection. Beautiful to hold and behold, these Japanese-designed...
Zhang xiaoquan Inc.
- 311400 - Hangzhou
- +15 2 21 95 51 68
Thursday, April 27, 2023
Custom CNC Machining Service of Precision CNC Machined parts, CNC Turned Parts, from Metal to Plastic, 1 Piece Prototype to Mass Production Looking for china cnc machining company ? YS Rapid is proud to offer one-stop CNC machining service including milling, lathing, boring, grinding, etc...
YS RAPID MANUFACTURING LIMITED
- ysrapid
- 518106 - shenzhen
- 8615817251032
Tuesday, March 10, 2020
GENERAL: The KDM-920 is a compact combination set of automatic blister packing machine ( Model: KDB-120 ) & automatic cartoning machine ( Model: KDM-900 ). This machine starts its production of blister packaging products then inserted into the automatic cartoning machine for...
Kwang Dah Enterprise Co., Ltd.
- 24874 - New Taipei City,
- 886 2 2971 3333