Everything else / Bulk

10 Tips for Using A Bottle-Top Dispenser

1. When installing the intake tube and the drain tube, insert the bottle-top dispenser tubes straight into the valves, tighten the nut properly to protect the tubes.

2. Make sure bottle-top dispenser that the intake and drain valves and all valves are properly installed and tightened to prevent splashing of the piston movement before using the equipment.

3. When draining, make sure that the drain tube is not directed towards the operator to avoid danger.

4. When draining, control the piston to move at a constant speed and use a suitable container to receive the liquid and let the liquid run down the side.

5. If you encounter any trouble during draining, please don't continue the operation in any violent way to avoid further damage to the equipment.

6. After using the bottle-top dispenser, please fasten the safety cap of the drain tube to prevent the liquid in the drain nozzle from dripping due to gravity or water vapor in the air.

7. After using the instrument, please rotate the adjustment ring to “0” position to ensure safety.

8. Restricted reagents: HF acid and bromine suspensions. (A special bottle dispenser is required when using such restricted reagents.)

9. Do not apply organic reagents to the surface of the equipment. If the accident happens, wash the equipment surface in time with water.

10. The bottle-top dispenser is suitable for operation at a temperature of 33.8-122°F or 4-50 °C.

Location : Xi'an City , Shaanxi Province, P.R.China, 710077 Xi'an,
Contact : Bruce Lu, +86 29 89284429

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
10 Tips for Using A Bottle-Top Dispenser

Search in a category : Everything else / Bulk
Search in a category :
dispenser, tips, bottle
France 361002 Second hand goods
China custom made CNC rapid prototype

Friday, May 16, 2014

Quantity : 500000pcs - Price : $1-25/pc

Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...

Xiamen Karo Co.,Ltd

France 361002 Second hand goods
3D Print Plastic rapid protoyping maker

Friday, May 16, 2014

Quantity : 500000pcs - Price : $1-25/pc

Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...

Xiamen Karo Co.,Ltd

China 518000 Equipment goods
Surfboard on sale

Friday, June 24, 2016

Brand name Top Main material EPS foam core Size Customized size Fiberglass 4oz+6oz fiberglass+bamboo on the deck,6oz giberglass on the botton; or customized. Major market USA,Japan,Australia,Europe,etc. Available accessories Fin,leash/leg,bag cover,deck pad /traction pad ...

Top Sports Equipment.,Ltd

  • 518000 - Longgang District Shenzhe
  • +86 755 28903153
  • +86 18682355896