Seller dndoptics

Wednesday, August 12, 2015

Specification of "Corner Cube Prisms" Corner Cube Prisms is widely used in Golf course devices.Such as Rangefinders and Flagsticks. Prism mounted in the flagstick tip, to reflect laser from and back to a Rangefinders by parallel ways. It provide the golf palyer with a instant...

Wednesday, August 12, 2015

Specification of Corner retroreflectors Corner Cube Prisms The typical size of Corner retroreflectors Corner Cube Prisms is 12.7mm (1/2"). Whatever direction laser or light entering into the top surface, the incident ray will be reflected on one of the roof surfaces. Most specially...

Wednesday, August 12, 2015

Specification of "Corner Cube Prisms coated silver and black paint" To enhance the reflective rate of “Corner Cube Prisms coated silver and black paint” of the 3 roof surfaces,we usually coat the roof suface with silver,so that to make it more than 99.9% reflecting the incoming light beam...

Wednesday, August 12, 2015

Specification of "Corner Cube Prisms" “Corner Cube Prisms” is a special prism,which is characterized by reflecting light beam parallelly.No matter the light beam will enter the suface by what incident angle.With this special feature,this kind of prisms are good optional for distance survey...

Wednesday, August 12, 2015

Corner Cube Prisms are usually built in the tip of a Golf Flagstick Reflector to reflect laser beam from a rangefinder in the Golf course yards.Laser beam enter and come out of the prism in parallel,which help the measuring device to measure the distance.The prisms can be built into...